Use To Align Parts, Start Pins, Assembly/Dissambly
For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won’t bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15, 1911 Auto, Remington 870 and Ruger Revolvers. Won’t roll off bench. Alignment/Push Punch Set includes one each of the punches listed below, plus a Delrin bench block to store and organize all eight punches, so you always have them at your fingertips. Bench block also available separately.
SPECS: Handle - Plastic. Shank - Unhardened steel drill rod, or 360 alloy brass . 3¼” (8.2cm) long. OAL - 4¾” (12.1cm) long. Alignment/Push Punch Set - Contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092” (2.3mm), .120” (3mm), .151” (3.8mm), and .246” (6.2mm). Bench Block - Delrin, tan. 63⁄8” (16cm) long, 3” (7.6cm) wide, ¾” (1.9cm) high. Holds 8 punches.
More...
Customer ratings for BROWNELLS ALIGNMENT & PUSH PUNCH BENCH BLOCK ONLY
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
Handy Set(19/06/2012)
This is a great set and the block makes a nice place to store them on your bench. They are not made to be hammered, but you could lightly tap them with a nylon hammer without damage. The set I bought included steel and brass.
Brownells push pin set(08/06/2017)
I like the brass pin pushers but the steel pin pushers are very soft and will bend easily if you need to align parts.
A Must Have(17/04/2010)
These are great for installing triggers on AR'S. These Brass alignment punches should be on the bench of every gunsmith or hobbyist.
Product no.: 080000034 BROWNELLS SET OF FOUR STEEL PUNCHES050806005105 For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won’t bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15, 1911 Auto, Remington 870 and Ruger Revolvers. Won’t roll off bench. Alignment/Push Punch Set includes one each of the punches listed below, plus a Delrin bench block to store and organize all eight punches, so you always have them at your fingertips. Bench block also available separately.
49.9GBP12£49.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Material: SteelSize: .092 in, .120 in, .151 in, .246 inStyle: Set, Alignment, PushQuantity: 4
Use To Align Parts, Start Pins, Assembly/Dissambly
For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won’t bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the AR-15, 1911 Auto, Remington 870 and Ruger Revolvers. Won’t roll off bench. Alignment/Push Punch Set includes one each of the punches listed below, plus a Delrin bench block to store and organize all eight punches, so you always have them at your fingertips. Bench block also available separately.
SPECS: Handle - Plastic. Shank - Unhardened steel drill rod, or 360 alloy brass . 3¼” (8.2cm) long. OAL - 4¾” (12.1cm) long. Alignment/Push Punch Set - Contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092” (2.3mm), .120” (3mm), .151” (3.8mm), and .246” (6.2mm). Bench Block - Delrin, tan. 63⁄8” (16cm) long, 3” (7.6cm) wide, ¾” (1.9cm) high. Holds 8 punches.
More...
Customer ratings for BROWNELLS ALIGNMENT & PUSH PUNCH BENCH BLOCK ONLY
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
Handy Set(19/06/2012)
This is a great set and the block makes a nice place to store them on your bench. They are not made to be hammered, but you could lightly tap them with a nylon hammer without damage. The set I bought included steel and brass.
Brownells push pin set(08/06/2017)
I like the brass pin pushers but the steel pin pushers are very soft and will bend easily if you need to align parts.
A Must Have(17/04/2010)
These are great for installing triggers on AR'S. These Brass alignment punches should be on the bench of every gunsmith or hobbyist.