The ELF AR 308 Trigger has been built to withstand the punishment of high powered calibers. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. The only AR 308 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Elftmann’s exclusive .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. The AR 308 trigger is essentially the service trigger with a lighter pull weight range. A second-to-none AR 308 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The AR 308 trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero overtravel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your AR308 platform, this is the trigger system for you! Features: Fits any mil-spec AR 308 Straight or Curved Trigger Available Incremental Adjustable Knob Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Proprietary double-double torsion hammer spring ensures proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing
More...
002GBP
Product no.: 100800163 ELFTMANN AR 308 TRIGGER CURVED FINGER ADJUSTABLE Mfr Part: AR10-C FA616612925893 The ELF AR 308 Trigger has been built to withstand the punishment of high powered calibers. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. The only AR 308 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Elftmann’s exclusive .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. The AR 308 trigger is essentially the service trigger with a lighter pull weight range. A second-to-none AR 308 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The AR 308 trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero overtravel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your AR308 platform, this is the trigger system for you! Features: Fits any mil-spec AR 308 Straight or Curved Trigger Available Incremental Adjustable Knob Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Proprietary double-double torsion hammer spring ensures proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 100800164 ELFTMANN AR 308 TRIGGER STRAIGHT FINGER ADJUSTABLE Mfr Part: AR10-S FA616612925909 The ELF AR 308 Trigger has been built to withstand the punishment of high powered calibers. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. The only AR 308 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Elftmann’s exclusive .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. The AR 308 trigger is essentially the service trigger with a lighter pull weight range. A second-to-none AR 308 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The AR 308 trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero overtravel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your AR308 platform, this is the trigger system for you! Features: Fits any mil-spec AR 308 Straight or Curved Trigger Available Incremental Adjustable Knob Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Proprietary double-double torsion hammer spring ensures proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing
The ELF AR 308 Trigger features an adjustable pull weight from 2.75 lbs to 4 lbs and uses aerospace grade sealed bearings for a smooth pull.
Installation is quick using original AR hammer and trigger pins, and the trigger is available with either a straight or curved shoe.
Designed for durability and performance, the trigger is drop-safe, has a very short pull and reset, and includes a unique disconnect to eliminate wear and double-firing.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your AR 308 with the Elftmann Adjustable Trigger! 🔥 Enjoy smooth pulls, easy adjustments, and unmatched performance for precision shooting.
The ELF AR 308 Trigger has been built to withstand the punishment of high powered calibers. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. The only AR 308 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Elftmann’s exclusive .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. The AR 308 trigger is essentially the service trigger with a lighter pull weight range. A second-to-none AR 308 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The AR 308 trigger may be ordered with a curved or straight shoe. The amazingly short take-up, glass-rod crisp break and next to zero overtravel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your AR308 platform, this is the trigger system for you! Features: Fits any mil-spec AR 308 Straight or Curved Trigger Available Incremental Adjustable Knob Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Proprietary double-double torsion hammer spring ensures proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing