Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

BROWNELLS
BOLT ACTION FIRING PIN REMOVAL TOOL

050806006089 080000409
Quickly Remove Firing Pins From Remington & Ruger~ Rifles
A third hand for removing the firing pin from Remington and Ruger® bolt action rifles without lost parts or sore fingers that sometimes accompany this tricky job. Install the correct bushing for your rifle in the end of the tool body. Screw the firing pin assembly into the bushing, and tighten the threaded, steel shank to compress and capture the mainspring. The hollow shank protects the firing pin tip as it slides over the pin to compress the spring. The crosspin can then be driven out with a punch, and the spring tension relieved by gradually loosening the shank. Includes bushings for Remington 700 family and Ruger M77® Mark II rifles. Built-in storage slot holds the unused bushing on the tool body, so it’s always there when you need it. NOTE: Will not fit Ruger Left hand actions.

SPECS: Aluminum base, hardcoat anodized, black. Hardened tool steel screw shank and bushings, black oxide finish. Body - 5¼” (13.34cm) long, 1” (2.54cm) wide, 1-3⁄16" (3.02cm) high. Shank – 3½” (8.89cm) long. Fits Remington 700, 710, 721, 722, Model Seven, XP-100, M24, and 40X; Ruger M77 Mark II, 77/22, 77/17, 77/44 bolt action rifles.

129.9 129.9 1 GBP
Product no.: 080000409
BROWNELLS FIRING PIN REMOVAL TOOL 050806006089 Firing Pin Removal Tool
129.9 GBP 24 £129.90 *
Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse
Specs: Make: Ruger, Remington Model: Universal Rifles

Description

Firing Pin Removal Tool

Attributes

Make: Remington,Ruger Model: Universal Rifles Delivery weight: 0.431kg Shipping height: 58mm Shipping width: 112mm Shipping length: 183mm UPC : 050806006089

Item details

Made in USA




Easily remove firing pins with the BROWNELLS Firing Pin Removal Tool 🔧. Fits popular Ruger & Remington models for efficient maintenance.

Quickly Remove Firing Pins From Remington & Ruger~ Rifles
A third hand for removing the firing pin from Remington and Ruger® bolt action rifles without lost parts or sore fingers that sometimes accompany this tricky job. Install the correct bushing for your rifle in the end of the tool body. Screw the firing pin assembly into the bushing, and tighten the threaded, steel shank to compress and capture the mainspring. The hollow shank protects the firing pin tip as it slides over the pin to compress the spring. The crosspin can then be driven out with a punch, and the spring tension relieved by gradually loosening the shank. Includes bushings for Remington 700 family and Ruger M77® Mark II rifles. Built-in storage slot holds the unused bushing on the tool body, so it’s always there when you need it. NOTE: Will not fit Ruger Left hand actions.

SPECS: Aluminum base, hardcoat anodized, black. Hardened tool steel screw shank and bushings, black oxide finish. Body - 5¼” (13.34cm) long, 1” (2.54cm) wide, 1-3⁄16" (3.02cm) high. Shank – 3½” (8.89cm) long. Fits Remington 700, 710, 721, 722, Model Seven, XP-100, M24, and 40X; Ruger M77 Mark II, 77/22, 77/17, 77/44 bolt action rifles.

4.8
In stock
£54.90
3.7
In stock
£18.90 £16.90 - £18.90
5
Reordered
£28.90
Back to top