Help and contact
(0) Basket
Newsletter
L.E. WILSON
BUSHING NECK DIE SETS
174.9
209.9
6
GBP
Product no.: 749018051
L.E. WILSON 243 WINCHESTER BUSHING NECK DIE KIT
Mfr Part: SKBN243W L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
L.E. WILSON 243 WINCHESTER BUSHING NECK DIE KIT
Mfr Part: SKBN243W L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
Specs:
Cartridge: 243 Winchester
Die Style: Bushing Full Length Die Set
Product no.: 749018050
L.E. WILSON 223 REMINGTON BUSHING NECK DIE KIT
Mfr Part: SKBN-223R L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
L.E. WILSON 223 REMINGTON BUSHING NECK DIE KIT
Mfr Part: SKBN-223R L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
Specs:
Cartridge: 223 Remington
Die Style: Bushing Full Length Die Set
Product no.: 749018052
L.E. WILSON 260 REMINGTON BUSHING NECK DIE KIT
Mfr Part: SKBN-260R L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
L.E. WILSON 260 REMINGTON BUSHING NECK DIE KIT
Mfr Part: SKBN-260R L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
Specs:
Cartridge: 260 Remington
Die Style: Bushing Full Length Die Set
Product no.: 749018054
L.E. WILSON 6.5 CREEDMOOR BUSHING NECK DIE KIT
Mfr Part: SKBN-65CRE L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
L.E. WILSON 6.5 CREEDMOOR BUSHING NECK DIE KIT
Mfr Part: SKBN-65CRE L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
Specs:
Cartridge: 6.5 Creedmoor
Die Style: Bushing Full Length Die Set
Product no.: 749018053
L.E. WILSON 308 WINCHESTER BUSHING NECK DIE KIT
Mfr Part: SKBN-308W L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
L.E. WILSON 308 WINCHESTER BUSHING NECK DIE KIT
Mfr Part: SKBN-308W L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
Specs:
Cartridge: 308 Winchester
Die Style: Bushing Full Length Die Set
Product no.: 749018055
L.E. WILSON 6.5X47MM LAPUA BUSHING NECK DIE KIT
Mfr Part: SKBN6547L L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
L.E. WILSON 6.5X47MM LAPUA BUSHING NECK DIE KIT
Mfr Part: SKBN6547L L.E. Wilson’s Bushing Neck Die Kit consists of a bushing-style neck resizing die and Wilson’s precision stainless steel seater die. Wilson’s Stainless Steel Seater Die has a micrometer top that lets you make fine adjustments of seating depth in precise .001" increments. The die holds bullet and case in perfect alignment as the bullet is seated in the case. This is a hand-die designed for use with a mallet or an arbor press. NOT for use on a conventional 7/8 press. Wilson’s Bushing Neck Sizer Dies feature interchangeable bushings to size the outside of the case neck to 3/16" from the case mouth. This allows for total control as to the amount of neck sizing each case receives. Simply change the bushing to increase or decrease the neck-tension on the bullet. The L.E. Wilson Bushing Neck Die Kit are Hand-die design for use with a mallet or an arbor press. Not for use on a conventional press. Bushing sold separately, accepts L.E. Wilson, Redding, or Sinclair carbide bushings
Specs:
Cartridge: 6.5 x 47 mm Lapua
Die Style: Bushing Full Length Die Set
Achieve precise bullet seating with the L.E. Wilson Bushing Neck Die Kit for 243 Winchester. 🔧 Perfect for hand-die use with adjustable tension!
In stock
£54.90
£54.90 - £59.90
In stock
£27.90
£18.90 - £31.90
In stock
£18.90
£17.90 - £26.90
Classical view
Mobile view