The manufacturer Kinetic Research Group mainly resides in the area of Rifle Parts, Shooting Accessories and Optics & Mounting.
KRG was established conceptually in 2005 by a group of then active duty Army Special Forces soldiers. Being both professional and sport shooters, their passion led them to a deep understanding of the strong and weak points in the fielded equipment. They were not satisfied with the small arms or accoutrements available. KRG identified a need for evolutionary enhancements as well as completely new products. A wide range of quality products are available including rifle parts, shooting accessories, gunsmith tools and mounting solutions.
View More...View Less...
Kinetic Research Group Rifle Parts Kinetic Research Group Shooting Accessories Kinetic Research Group Gunsmith Tools Kinetic Research Group Optics & Mounting
The Midas 2-Stage Trigger offers a fully adjustable experience, enhancing the performance of Tikka T3 series rifles.
It includes adjustable 1st and 2nd stages, over travel, and fore/aft shoe position, with a total adjustment range of 2lb-5+lbs.
Designed to be SAAMI drop safe compliant and not recommended to be set lower than 2.5lbs.
The kit allows for easy, tool-less adjustment of buttpad height and cant for various KRG chassis, enhancing shooting adaptability.
Compatible with KRG X-ray, Bravo, and 180-Alpha chassis, the kit includes an upgraded Whiskey-3 buttpad mount plate with multiple set positions.
Constructed from aluminum with a black finish, the kit does not include a new buttpad; the existing buttpad must be used.
The Hook style cover is designed to fit the Bravo chassis and replaces the standard angled surface cover.
It is used for the rear hook configuration and attaches with a single screw for easy installation.
The cover is made of polymer with a black finish and is compatible with all inlets of the Bravo Chassis.
The Spigot Mount offers versatile mounting options for KRG Whiskey-3, X-Ray, or Bravo chassis, enabling better bipod positioning and sling attachment.
It is compatible with all KRG X-ray, Bravo, and Whiskey-3 (gen 3/2013 and newer) and can be used with the KRG INVR.
Constructed from machined aluminum billet with a mil-spec hard anodize finish, the mount weighs 3.5 oz and requires hex wrenches for installation.
The KRG Whiskey-3 Chassis is a high-end precision rifle stock with tool-less adjustments, aluminum bedding, and is compatible with AICS style magazines for the Remington 700 short action.
It offers a high degree of customization with modular grip panels, various accessory attachment points, and a new streamlined length-of-pull locking mechanism in the latest generation.
The chassis is available in Flat Dark Earth, weighs 3.8 lbs, and is designed to enhance ergonomics and shooter fit.
The Kinetic Research Group Remington 700 Bravo Chassis provides rigidity with its full-length machined aluminum backbone, ensuring performance akin to custom bedding.
Constructed from reinforced polymer, the chassis is durable, features an adjustable cheek riser and length of pull, and is M-LOK compatible.
It fits all Remington 700 short actions, is available in black, weighs 2.9 pounds, and supports AICS-pattern magazines.
The cheekpiece is overmolded, providing grip and a bit of cushioning for extended use.
Designed with a right-hand shooter bias, it can be adjusted or flipped for left-hand use and fits Whiskey-3, X-Ray, & 180 series chassis.
May require modifications for actions with very long bolt throws to ensure proper clearance.
The Aluminum MOE Style Picatinny Rail is designed to fit Whiskey-3 Chassis forend and buttstock, as well as the X-ray buttstock.
This rail allows for the mounting of a rail-mounted monopod and is compatible with Magpul MOE hole spacing.
It is a lightweight option, weighing only 1oz, with MOE L2 hole spacing of 1.190" and MOE L3 spacing of 1.584".
The Howa 1500 Bravo Chassis is a rigid and durable stock with an aluminum backbone and reinforced polymer construction, designed in partnership with Kinetic Research Group.
It offers customization options including an adjustable cheek riser and length of pull, a built-in thumb shelf, and is available in black and flat dark earth.
The chassis is compatible with all AICS-pattern magazines and features M-LOK compatibility, quick-detach sling-swivel points, and a bipod-attachment stud.
The CZ-457 Bravo Chassis offers a balance of comfort, modularity, and affordability for target/varmint shooting.
Features a precisely machined bedding area and a stiff aluminum backbone to prevent forend flex.
Provides ergonomic adjustments to fit the shooter's frame and utilizes factory rimfire magazines (not included).
The KRG Arca rail adds Arca-Swiss rail functionality to KRG Whiskey-3, X-ray, or Bravo chassis.
Its design is low profile and lightweight, enabling easy attachment to the forend without being intrusive.
Allows for versatile accessory mounting, including quick bipod attachment and repositioning with an ARCA Clamp.
The INVR is compatible with KRG Whiskey-3, X-ray, and TRG-22/42 chassis, providing a Picatinny rail for night vision devices and side mounts for accessories.
It has a 1.15" bore diameter to accommodate many heavy barrel contours but requires removal of the steel insert plate for TRG models and cannot be used with TRG bipods or very heavy barrels.
Constructed from aluminum with a matte black finish, the INVR weighs 4 ounces and enhances the functionality of the rifle chassis with additional mounting options.
The X-Ray Gen 4 chassis offers excellent value with high-end features like AICS magazine compatibility and aluminum block bedding without a high cost.
It includes a new one-piece backend with tool-less adjustments for buttpad height and cant, alongside an ambidextrous cheekpiece thumbscrew.
Designed for the Remington 700 Short Action, it weighs 3 lbs and is available in Flat Dark Earth, but actions with trigger hangers may require modifications.
The KINETIC RESEARCH GROUP Tikka T3x Bravo Chassis is a comfortable, modular stock with a machined bedding area for a precise action fit, and it's compatible with AICS mags.
Designed with a full-length aluminum backbone, the chassis prevents forend flex and allows for a variety of accessories and compatibility with other KRG chassis.
It features ergonomic adjustments to fit various body frames, is lightweight at 2.9 lbs, and comes in a Flat Dark Earth color.
The Bravo chassis offers essential benefits and target/varmint ergonomics at an affordable price, with a comfortable design and a precisely machined bedding area for optimal action placement.
It features a stiff aluminum backbone preventing forend flex, is modular with various accessories, and is compatible with AICS magazines and factory CTR mags (not included).
The chassis comes with ergonomic adjustments to fit the shooter's frame, is lightweight at 2.9 lbs, and has a stylish black color for the Tikka T3 and T3x models.
The KRG Enclosed Forend offers functionality with a Spigot Mount, Night Vision mount, and multiple attachment points including KRG pattern and M-Lok.
Designed for Whiskey-3, X-ray, and Bravo Chassis, it allows for a lower scope mounting, eliminating the need for ultra-high rings.
Made of aluminum with a black finish, it fits Tikka T3, T3x, CTR models and is recommended for use with no larger than a Remington Varmint barrel contour.
The NV Mount Cap Kit is designed to attach to the spigot mount of a KRG chassis, providing a top rail mount for night vision devices.
The kit includes a Night Vision Mount Cap, spacers for the Spigot Mount, and mounting screws, compatible with all KRG Spigot Mounts.
The mount cap kit is made of aluminum, has a matte black finish, and weighs 3.3 ounces.
The BOLT LIFT SV is designed for the Remington 700 and is made from reinforced polymer for durability and strength.
Installation options include permanent with epoxy, a solid removable setup, or a quick install with supplied spacers for a tailored fit.
Its construction not only enhances performance but also provides insulation from environmental factors for the user's hand.
The mount is designed for "S" series Harris Bipods, providing a solid, twist-minimizing connection to KRG chassis and accessories, and brings the bipod closer to the bore.
There are two versions available: an inline version with two screws for KRG chassis forends, and a wide version with four screws for greater lateral stability.
Constructed from 7075 Aluminum with hard anodize, the mount is compatible with KRG chassis forends on Whiskey-3, X-ray, and Bravo, as well as KRG Spigot Mount and Arca Clamp.