The Nighthawk Custom Govt. Model Pin Set includes a complete set of precision machined, hardened, and blued steel pins for 1911 pistols.
It provides replacements for all essential pins, including mainspring cap and pin, as well as the safety lock plunger/slide stop plunger assembly.
These pin sets are specifically designed for the 1911 Government and Commander models, ensuring a perfect fit and function.
The Nighthawk Custom 1911 Hammer is crafted from solid tool steel, hardened for durability and longevity.
Designed by Bob Marvel, it features precision-cut hooks and a pin hole for a perfect fit, requiring gunsmith fitting.
It includes a large oval cutout to reduce weight and serrations for a non-slip grip, with a surface ready for final grinding and polishing.
The Nighthawk Custom 1911 Govt. Flat Mainspring Housing features 25 lpi checkering for a solid grip and improved recoil control.
It is designed to enhance accuracy by maintaining correct pistol positioning in the shooter's hand.
This all-steel housing is available in both flat and arched models to suit different grip preferences.
The sear is crafted from hardened tool steel for durability and longevity.
It comes with primary and secondary cuts pre-cut and polished, minimizing the need for fitting.
Gunsmith fitting is required to ensure proper function and safety.
The firing pin is precision-machined from stainless steel for a secure fit and to prevent primer flow.
There are separate models available for .45 ACP and 9mm/.38 Super to ensure proper weight and size for reliable ignition.
It is designed for 1911 models including the Government, Commander, and Officers in calibers 38/357 (.357-.359) and 9 mm (.355-.356).
1911 Barrel Links by Nighthawk Custom are machined from solid 416 stainless steel for optimal accuracy.
Includes a set of five links with nominal Colt spec .278" and variations in .005" increments for precise vertical lockup.
Compatible with 1911 models: Government, Commander, and Officers for fine-tuning Nighthawk Match Grade Barrels.
High-quality steel replacement recoil spring plug for 1911 models, specifically the Government size.
Features a semi-gloss blued finish with diamond pattern checkering on the tip.
Essential spare part to have as the gun will not function without it; easy to lose during field stripping.
The Nighthawk Custom 1911 Magazine Release Lock & Spring is made of tough, hardened steel and is approximately 1/16" longer than Colt-spec parts for quicker and more efficient magazine changes.
It features a deeply serrated face for secure thumb grip and is designed to prevent snagging on holsters, clothing, or gear.
Compatible with 1911 models such as Government, Commander, and Officers, the mag release may require fitting and comes in a blued, matte finish.
Heavy-duty 1911 ejector with extended nose for reliable ejection of spent cases.
Constructed from hardened bar stock and finished with bluing for durability.
Designed specifically for .45 ACP caliber; may require minor fitting.
High-quality, one-piece guide rod with matching guide plug ensures smooth cycling and prevents recoil spring issues.
Adds weight to the front of the 1911 to reduce muzzle flip, enhancing control and enabling faster follow-up shots.
Made from solid stainless steel for strength and durability, with some fitting potentially required for perfect installation.
Nighthawk Custom's Drop-In Trigger System (DTS) for 1911 pistols is an all-in-one unit that upgrades the trigger with a crisp, clean break.
The DTS is easy to install, requiring minimal gunsmithing skills, and it fits most quality in-spec 1911 and 2011 models.
Features of the DTS include Fully Machined™ stainless steel components, a single-leg grip safety spring, and an expected trigger pull of 3 3/4 - 4 lb after a 100 round break-in period.
Match grade 1911 disconnector with precision ground engagement surfaces for a crisp trigger pull.
Fully machined from solid bar stock with polished engagement surfaces, not cast.
Compatible with 1911 models Government, Commander, Officers and requires gunsmith fitting.
Match grade 1911 Government barrel bushings made from premium-grade stainless steel for improved accuracy and durability.
Dimensions are intentionally oversized to allow custom fitting for precise lockup, enhancing shooting accuracy.
Professional gunsmith fitting required due to the specific measurements and customization needed.
Designed by Bob Marvel, the 1911 Bob Marvel Hammer Strut is precision machined from stainless steel for top performance.
The hammer strut features a smooth, hemispherical tip for fast lock time and reliable ignition, with an enhanced profile to prevent hammer stacking and strut binding.
Intended for the 1911 models Government, Commander, and Officers, it requires gunsmith fitting and is 2.225” long with a natural silver finish.
High-quality replacement springs ensure reliable pistol performance, including proper feeding and ejection.
Kit includes two standard weight recoil springs, an extra power recoil spring, and reduced power hammer spring for custom builds or maintenance.
Recommended by pistolsmiths for regular replacement as part of preventive maintenance to maintain consistent function.
Nighthawk Custom offers high-quality, match-grade triggers with options for solid or skeletonized shoes.
Features include crisp serrations for a non-slip grip, overtravel adjustment, and a hex wrench included for installation.
Available for 1911 models including Government, Commander, and Officers, with a solid trigger shoe in Short and Medium lengths.
Precision machined from solid bar stock for strength and accuracy.
Designed with exact internal dimensions for smooth plunger operation.
Features extra-long staking studs for a secure attachment to the frame.
The Nighthawk Match Grade 1911 Parts Kit includes all components needed to assemble a custom .45ACP Government model pistol, except for the frame and sights.
Parts are made from high-grade stainless steel with a matte finish, except for the blued steel sights which feature a red fiber optic insert for visibility.
No FFL is required to purchase the kit, as it does not include the receiver, allowing direct shipment to the buyer's location.
Nighthawk Custom 1911 slides are precision machined from stainless steel for strength and quality.
Designed for customizability, the slide has a smooth top for custom sight dovetail cuts and options for side serration patterns.
The slides come with a lowered and flared ejection port, require gunsmith fitting, and are compatible with 5" Government model .45 ACP barrels.