The TANDEMKROSS "Victory" trigger for the Browning Buck Mark features a flat-faced, skeletonized design for improved control and leverage.
It offers a textured surface for a non-slip grip and adjustable pre-travel and over-travel for a customized trigger pull.
The trigger's wide face and lightweight design contribute to a perceived lower pull weight and enhanced shooting precision.
The Volquartsen Ruger® Mark IV™ Accurizing Kit significantly improves pistol performance, providing a smoother operation with a crisp, clean 2.5 lb. trigger pull.
This comprehensive kit includes an adjustable trigger, hammer/strut assembly, hammer bushing, sear, plunger, and spring, and eliminates the magazine disconnect feature.
Designed for easy installation, the kit fits all variations of the Mark IV™, including 22/45™, and comes with the necessary hex wrenches and threadlocker.
The Timney Alpha Trigger enhances the Gen 5 Glock's performance while maintaining its reliability and safety.
It features a Teflon-nickel-treated trigger bar and sear, and an anodized-aluminum straight trigger blade, providing a crisp 3-pound pull.
Designed for easy installation without a gunsmith, it fits Glock models G17, G19, and G34 of the Gen 5 series.
The kit is a direct drop-in replacement for factory polymer trigger, connector, and striker plunger, enhancing trigger performance.
Improvements include a smoother trigger pull, reduced weight, travel, and reset distance, with a crisp break.
Compatible with a range of Gen 3 and Gen 4 Glock® models, maintaining factory safety values.
The GHOST PRO 3.3 Trigger Connector and Spring Kit provides a light, smooth 3.3-pound trigger pull for Glock GEN 1-4, excluding models 42 & 43.
It eliminates the pre-travel "bump" and over-travel of the trigger, enhancing accuracy and speed for self-defense shooting.
The kit includes a complete spring set and comes with a lifetime guarantee from Ghost, but minor fitting may be required upon installation.
The Apex Forward Set Trigger Bar for the Sig Sauer P320 reduces trigger travel by approximately 20% and maintains factory drop safety values.
It is compatible with factory upgraded P320 models, including X-Series, but not recommended for use in Sub-Compact Grip Modules or non-factory upgraded P320 pistols.
Installation of the trigger bar may result in a 10% increase in trigger pull weight due to changes in leverage.
The kit significantly improves trigger pull characteristics, reducing weight to approx. 5.5 lbs and minimizing pre-travel, over-travel, and reset distance.
It is a direct drop-in replacement for FN model pistols FNS and FNS Longslide, including pre-2014 models, but not suitable for FN 509, FNS Compact, or FN 503.
The package includes an Action Enhancement Trigger with Apex Trigger Bar and an Apex Performance Sear, maintaining factory safety values.
The 1911 Long Aluminum Trigger by Cylinder & Slide features a long, aluminum shoe with fine line serrations for improved trigger control and accuracy.
It comes with a highly polished, stainless steel bow to prevent trigger-flex and includes an overtravel stop screw for creep adjustment.
Designed for 1911 models including Government, Commander, and Officers, the trigger requires gunsmith fitting and has a 3-hole drilled, lightweight design.
The Apex Tactical Specialties Inc Trigger Kit provides a smoother, lighter trigger pull with a shorter reset for S&W M&P .45 and M2.0 pistols.
The kit includes a trigger, heavy-duty sear spring, machined sear, spring set, Ultimate Striker Block Kit, and a slave pin for easier installation.
Designed for drop-in installation, the kit is compatible with all S&W M&P pistols in .45 ACP and the M2.0 but not with 9mm/.40, Shield, or .22 LR models.
The Timney Alpha Trigger is designed to enhance the trigger pull of Glock models G17, G19, G22, G23, and G34 from Gen 3 and 4 without compromising their reliability and safety.
It features a Teflon-nickel-treated trigger bar and sear, an anodized-aluminum straight trigger blade, and is factory-tuned for a crisp 3-pound trigger pull.
The trigger assembly is easy to install using Glock's OEM components and springs, eliminating the need for a gunsmith.
The Apex Tactical Specialties Inc Red Flat Faced Forward Set Trigger Kit is designed for S&W M&P pistols (excluding Shield and M&P 2.0) and mimics a 1911 type trigger with a 3.0 to 4.0 lbs pull weight.
This trigger kit reduces pre-travel and over-travel, allows for better finger positioning due to its flat face, and requires an existing Apex Forward Set Sear kit.
The full kit includes an Ultimate Striker Block for a smoother pull and reduced false resets, and is not recommended for duty/carry applications.
The Polymer DAT Trigger Kit by Overwatch Precision is designed to shorten the pull distance of Glock® triggers by up to 20%, suitable for shooters with shorter fingers without compromising safety.
This budget-friendly trigger upgrade maintains the key benefits of the aluminum DAT Trigger, with a solid-body polymer shoe and a stainless steel OEM Glock trigger bar.
The trigger kit is compatible with Gen1 to Gen4 Glock® models and features a flat-faced shoe for improved control, reduced pre-travel, and a crisp break with minimal overtravel.
The kit includes a solid polymer trigger with a center mounted pivoting safety, offering a smooth trigger surface.
It significantly improves the trigger pull by reducing pre-travel by 20%, over-travel by 10%, and the pull weight by about 2 pounds.
Designed specifically for the S&W SDVE series handguns, enhancing the overall shooting experience.
The kit includes a Polymer Action Enhancement Trigger, Trigger Bar, and Performance Connector for a smoother trigger pull with a crisp break at 4.5lbs.
Designed as a direct drop-in replacement for factory polymer triggers in Glock® models G43, G43X, and G48, it is not compatible with Glock® 42.
Components are coated in Nickel-Teflon for smooth operation and corrosion resistance, with the entire kit being 100% made in the USA.
The Apex Polymer Forward Set Trigger Kit improves trigger performance by reducing pre-travel and over-travel, offering a smoother 4lb pull for competition or 5.5lb for duty/carry.
Kit includes a forward set sear, trigger, striker block kit, and spring kit with options for trigger return spring weight, and is compatible with Smith & Wesson M&P pistols (except M&P Shield and M&P 2.0).
Features a center mounted pivoting safety bar for secure operation and an improved striker block for a more reliable and smoother trigger pull.
The trigger is a high-quality, match-grade component used by Wilson Custom Shop in custom 1911 pistols, designed for consistent trigger pull and crisp letoff.
Made from high-grade aluminum with a solid shoe, it features clean serrations for grip, an adjustable overtravel screw, and comes in various lengths for customization.
The stirrup is constructed from heat-treated stainless steel for minimal flex, and the trigger may require minor fitting to install on Government, Commander, or Officers model 1911s.