The Swage Gage Primer Pocket Gauge allows you to check the depth and diameter of primer pockets for small or large primers.
Using the "Go" end, you can determine if the primer pocket depth is correct, the crimp is properly removed, and if the pocket is not too loose.
If the "No Go" end fits into the primer pocket, it indicates that the pocket is too loose to securely hold a primer, and the brass should be discarded.
Lyman's 6.5 Creedmoor case length/headspace gauge ensures safety and accuracy by verifying the headspace dimension after resizing bottleneck rifle cases.
Using the gauge is simple: insert the case to check that it meets the minimum and does not exceed the maximum allowable headspace.
Any case that exhibits excessive headspace should be considered unsafe and must be destroyed immediately to prevent potential hazards.
The Sinclair Bullet Seating Depth Tool is made from stainless steel and is designed for both small caliber (17 and 20) and larger caliber (22 and up) rifles.
It enables precise measurement of loaded round length touching the rifling using fireformed brass and bullets, and is compatible with most bolt action, single shot, and AR type rifles.
The tool comes with a Delrin action guide for bolt-action rifles and has additional guides available for AR-15's, AR-10's, and Tubb's 2000's, ensuring accurate Base-To-Ogive measurements when used with Bullet Comparators and calipers.
The Sinclair 6.5mm (.264") Bullet Comparator Inserts are designed to work with the Sinclair Bullet Comparator and Bump Gage Body for precise measurements.
These inserts are made from stainless steel and feature a tapered design that closely replicates the chamber throat, reducing wobble and increasing accuracy.
They enable consistent measurement of bullet ogive-to-base and loaded round ogive-to-cartridge-base, offering more reliable results than overall length measurements.
The Neck Tension Gage Tool is used to measure and ensure consistent neck tension for better bullet seating in reloading operations.
It can detect the presence of a "donut" at the neck-shoulder junction and helps determine the optimal inside neck diameter.
The tool comes with four stepped diameters for different calibers, and the kit includes all five caliber sizes.
The bullet inserts require a separately purchased Modular Headspace Comparator Body.
They feature a unique 3.0 degree "lead angle" for precise bullet ogive measurement, mimicking barrel contact.
Made from 17-4 Stainless Steel, these 30 Caliber inserts ensure accurate measurements for bullet and ammo consistency.
The RCBS Pistol Chamber / Cartridge Gauge allows for quick checks of case length, diameter, and overall cartridge length of handloaded pistol ammo.
If a loaded round fits into the gauge, it is confirmed to fit the chamber of your pistol.
It is a one-piece, non-adjustable gauge with easy-to-read engravings for caliber size, specifically designed for 45 Auto (ACP) cartridges.
Redding's #7 STANDARD BULLET SEATING MICROMETER converts conventional seating dies to precision micrometer seating dies for enhanced accuracy.
Allows for precise bullet seating depths to within 1/1000th of an inch, compatible with seating dies using ½-20 threads.
Designed for multiple cartridges including 243 Winchester and 25/300 WSM, and easily interchangeable between dies matching the micrometer number.
The ARMANOV Gauge Box is a tool for checking the consistency of .40 S&W ammunition, designed to prevent malfunctions caused by defective brass.
It features a 100-round capacity with a flip cover for easy transfer of ammo and is constructed from high-grade aluminium to CIP tolerances.
The gauge box includes a caved level design for quick ejection of rounds and is compatible with MTM case guard boxes or Dillon precision ammo boxes.
The ARMANOV OAL Checker is an upgrade for the new model Ammo Checker with an edge on the bottom, not compatible with the original flat-bottom model.
Designed for calibers 9 x 19 mm, 9 x 21 mm, 38 SuperComp, 40 S&W, 10 mm Auto, and 45 ACP, it helps identify improperly seated bullets and contributes to ammo uniformity.
The package includes the OAL Uniformer made of clear Acryl, with other items shown in images or videos, like the Ammo Checker or MTM ammo box, not included.
The ARMANOV Case Gauge is a precision tool for checking .300 AAC Blackout ammo to SAAMI specs, ensuring reliability.
Its stackable design allows for quick sorting of 10 rounds at a time and compatibility with MTM and other ammo boxes.
It doubles as an OAL checker and is machined from high-quality aluminum for durability and accurate reaming.
The Frankford Arsenal Cartridge Overall Length Gage is a tool for determining the optimum OAL (Overall Length) for any bullet using a cleaning rod and a set of calipers.
This kit includes two clamps that attach to a cleaning rod of ¼” diameter or less, allowing for easy measurement of bullet seating depth.
The gage can be used on all rifles and is useful for both measuring the distance between clamps to find OAL and checking seating depth during the reloading process.
The ARMANOV Stencil is designed for marking ammunition brass and is compatible with the ARMANOV Ammo checker.
Each stencil set includes a steel stencil and one color marker, and is made from stainless steel, making it durable and reusable.
Accessories shown in photos or videos, such as the Ammo checker, are not included with the stencil set.