The Accu-Ring serves as a die lock-ring with reference marks for precise adjustments in increments of 0.001 inches, primarily for sizing dies to set headspace length.
It can also be used for making fine adjustments to bullet seating depths when used with seater dies.
The actual movement per reference mark on the Accu-Ring is 0.000998 inches, which is effectively one thousandth of an inch (0.001”) for use in the Co-Ax® Reloading Press.
Forster's locking ring design uses a cross bolt to prevent misalignment and damage to die threads.
The locking ring is compatible with any standard 7/8-14 dies and is tightened with a 7/64" hex wrench.
Made from Aluminum, these locking rings are included with Forster's high-quality Bench Rest® Dies.
The L.E. Wilson VLD Seating Stem is tailored for VLD-style bullets, ensuring better seating by gripping the bullet lower on its profile.
It is compatible with various bullet designs including VLD Secant, Hybrid, and Tangent, and serves as a direct replacement for standard seating stems in L.E. Wilson Chamber Type Bullet Seater Dies.
The seating stem is designed with steeper stems to match the steeper profile of VLD bullets, providing reloaders with enhanced versatility for their ammunition.
Redding's #7 STANDARD BULLET SEATING MICROMETER converts conventional seating dies to precision micrometer seating dies for enhanced accuracy.
Allows for precise bullet seating depths to within 1/1000th of an inch, compatible with seating dies using ½-20 threads.
Designed for multiple cartridges including 243 Winchester and 25/300 WSM, and easily interchangeable between dies matching the micrometer number.
Redding TAPERED SIZING BUTTONS are designed for expanding the necks of bottleneck cartridges.
Compatible with Standard and Type “S” sizing dies from Redding; not inclusive of the decap rod.
Available for calibers ranging from 22 Caliber (.223-.224) to 6.5MM (264/6.5 mm), including 25 Caliber (.257).
Redding's 270 Caliber Carbide Sizing Button Kit enhances Standard and Type S dies for smoother, lubrication-free inside neck sizing.
The kit includes a carbide button, retainer, and spare decapping pin, but the decap rod is not included.
Designed specifically for 270 Caliber/6.8mm bottleneck cartridges and is not suitable for other dies than Redding's.
The lock nut is manufactured by L.E. Wilson, Inc. and is made of stainless steel.
It features a set screw to lock reloading dies in place, allowing for consistent depth without readjustment.
Designed to fit 7/8"-14 threads, it is compatible with most reloading dies.
The Sinclair Cross Bolt Die Lock Rings are precision machined from stainless steel and are compatible with all standard 7/8-14 reloading dies or press mounted accessories.
These lock rings feature machined flat and parallel surfaces and a cross bolt design that avoids contact with die threads, which is preferred by experienced reloaders.
The lock ring includes a larger hex screw crossbolt (7/64" Hex) that is designed to not protrude from the ring's circumference and is compatible with the Forster CO-AX Press.
Replacement decapping assemblies are designed for Forster Full Length and Neck Sizing Dies.
Each assembly includes the decap rod, spindle bushing and lock nut, expander ball, and the correct decapping pin.
The assemblies feature the E-Z Expander exclusive to Forster dies, specifically for the 30-06 Springfield cartridge.