The Tandemkross Game Changer Pro Compensator is designed to redirect muzzle gases and mitigate recoil, enhancing control over 5.56 NATO AR-15s and .22 LR competition pistols.
Its two-port design vents gases at 45-degree angles, maintaining a clear sight picture by avoiding upward gas venting that can blur vision.
The compensator supports various rounds but is optimized for .22 LR firearms, and the all-steel construction adds weight to the front end to help offset muzzle rise.
The TANDEMKROSS "Game Changer" Compensator significantly reduces muzzle rise and improves accuracy for .22 LR firearms.
It features large vent openings for easy cleaning and simple installation with colored instructions provided.
Constructed from high-strength T6061 aluminum with a black hardcoat anodized finish, it fits a variety of firearms including Ruger, Browning, and Walther models.
The MASS DRIVER COMP is a counter recoil compensator that does not require a threaded barrel, is 50 state legal, and is designed to reduce felt recoil and prevent damage to the pistol slide.
It is compatible with GLOCK™ GEN3 OR GEN5 G19 and G17 slides and can be used with most open-ended holsters; installation is recommended to be done by a gunsmith or armorer.
Using the compensator with +P and +P+ 9mm ammunition will lead to premature wear of the internal spring and potential failure; a recommended torque value for the guide rod nut is 25 lbs/in.
The Nowlin 45ACP Stainless 1911 Pre-Fit Match Grade Barrel 4.25" NR is designed for easy installation with minimal fitting required.
This barrel kit improves accuracy due to its pre-fitted hood, top lugs, and bottom feet, ensuring a close fit in most 1911 Auto models.
The kit includes a stainless steel bushing, barrel link, and a hardened, oversize pin, along with a factory-standard link.
Nowlin's 9mm Match-Grade Barrel is designed for easy installation in 1911 model handguns, particularly the Commander style, with minimal fitting required.
The barrel kit includes a pre-fitted stainless steel bushing, barrel link, and pin, and features a pre-fitted hood and lugs for increased accuracy.
Made from 416 stainless steel and heat treated to Rc 40, the barrel is available in 4.25" length, ramped for the 9mm Luger cartridge, and weighs 0.32 lbs.
Designed for Sig P320 Compact and compatible with X-Carry and M18, the TRUE PRECISION, INC. threaded barrel is a drop-in upgrade that may require minor fitting.
The barrel is made from 416R Stainless Steel, features broach cut rifling for accuracy, and can safely handle various ammo types, including cast lead.
Available in threaded and non-threaded versions, it comes with a range of coatings and finishes, and includes design improvements over OEM barrels for a superior fit and performance.
Silencerco threaded barrels are compatible with both Gen 3 and Gen 4 Glock 23 pistols, crafted from 416R stainless steel.
The barrels are available in either a black nitride or a natural stainless steel finish and come with a thread protector.
Designed for the .40 S&W cartridge, the barrel length is 4.5 inches and features 9/16x24 threading for suppressor attachment.
The barrel is forged from ordnance steel with national match specs, featuring a proprietary rifling technique for smooth lands and grooves, and air gauged for .0002" tolerance.
Available in non-ramped (standard) and ramped versions, with the ramped barrel requiring frame machining and offering direct magazine-to-chamber feeding.
Manufactured by KART PRECISION BARREL, the product comes in unfinished 4150 ordnance steel and is available in three lengths: 5", 6", and Commander 4.25".
The barrels are designed for the SIG Sauer P365 XL, providing improved accuracy with a 6-groove, broach-cut rifling design that accommodates all ammo types, including cast-lead rounds.
These match-grade barrels feature an 11-degree target crown, with threaded options available, and are made from stainless steel with a black nitride finish.
True Precision, Inc. manufactures these drop-in barrels specifically for the P365 XL model in 9mm, offering a range of finishes and a fully supported, SAAMI-spec chamber.
The Ed Brown 1911 45 ACP 4.25" Commander Threaded Barrel is designed for suppressor use, featuring a 0.578 x 28 tpi RH thread and includes necessary components like link, link pin, bushing, and thread protector.
Made from high-quality T-416 stainless steel, the barrel ensures superior accuracy and longevity, benefiting from processes like stress-relieving and heat-treating.
For reliable performance in a 1911, a suppressor with a Nielsen device is required, and the barrel is engineered for easy fitting and maximum accuracy with minimal work.
Faxon Firearms produces Match Series pistol barrels for SIG® P365, made from stress-relieved 416-R stainless steel with a black Nitride or PVD coating.
The barrels are designed with conventional rifling to accommodate a broad range of ammunition, including cast lead, and require no gunsmithing for installation.
These barrels offer better-than-factory tolerances, providing a consistent and tighter lockup than standard OEM barrels.
Designed for Glock 19, 19X, and Model 45 (9mm) pistols, this drop-in barrel enhances accuracy with its advanced broach cut rifling.
Constructed from USA sourced 416R stainless steel, the barrel is suitable for all ammo types, including cast lead, and comes with a variety of specialty coatings and finishes.
Available in both threaded and non-threaded versions, the threaded model includes a Viton high heat O-ring lock thread protector.