The OPTICS INTERFACE PLATE is precision machined from 4140 steel and black nitride coated for durability, designed specifically for Smith & Wesson M&P CORE 2.0 pistols.
It features tight tolerances to minimize movement and includes fences to secure older optics like RMR, while still accommodating newer sights such as DPP and RMRcc.
The plate is made in the USA by Forward Controls Design LLC, with specific torque values provided for different sights and a weight of 1.49 oz.
Machined aluminum mount for installing a Trijicon RMR reflex sight on a 30mm scope tube, allowing for quick shifts between long-range and close-in targeting.
Offers flexibility to position the RMR to the left, right, or at any desired angle for optimal sighting.
Compatible as a ring top half replacement on Precision Reflex 30mm scope rings, constructed from 6061 T6 aluminum with a hardcoat anodized finish for durability.
The Scalarworks KICK/01 Picatinny Riser Mount adds 0.69" in height to Picatinny Spec Rails for improved shooting ergonomics.
Compatible with Standard or Lower Co-witness sights and magnifiers, it allows for a more heads-up position and night vision use.
Constructed from durable 7075-T6 Aluminum with a Type III Anodized finish, it is 3.67" long and weighs 2.1 oz.
The Scalarworks Sync RMR Mount is a durable and lightweight mounting solution for Trijicon RMR sights on shotguns.
It features a proprietary key-slot system for a secure fit and is designed to co-witness with iron sights.
Constructed from 7075 T6 aluminum with a hardcoat anodized finish, the mount is compatible with several Benelli and Mossberg models.
The Arisaka Offset Optic Mount is a modular, reversible mount for AR15 rifles, allowing a 35 or 45 degree offset for red dot sights.
It is CNC machined from 6061-T6 aluminum, fits on Picatinny rails, and is compatible with various optic plates for different red dot sights.
The mount maintains a lower 1/3 co-witness height, with a base that sits 0.180" above the Picatinny rail, and comes with IP20 and IP27 Torx Plus bit drivers.
The 1913 Low Profile Picatinny Base Mount is compatible with Liberty/Justice reflex sights and can be attached to a variety of firearms with Picatinny rails.
This mount is versatile, suitable for use on shotguns, pistol caliber carbines, AKs, and target or hunting pistols.
Mounting the Liberty or Justice optics on long guns retains all the features that make them effective on handguns like Glocks or Berettas.
The Arisaka Trijicon MRO Mount is a low profile, minimalist design mount made from 7075-T651 aluminum with MIL-A-8625 Type III hard coat anodizing for durability.
It is available in 1.70" height with a tan finish and includes all necessary hardware and tools for mounting the Trijicon MRO optic.
The mount is manufactured in the USA by Arisaka Defense and is part of their mounting hardware category for optics.
The C&H Precision V4 MIL/LEO Optic Mounting Plate is specifically designed for MOS-ready Glock pistols and is compatible with a range of red-dot optics.
Made from 6061 aluminum with a hard-anodized finish, the plate features two recoil posts and replaceable T-posts for durability and reliability.
It includes Torx head screws for secure mounting and is available for Glock models 17, 19, 34, 35, 41, and 40, but is not compatible with the Trijicon SRO when marked RSF.
The mount is precision machined from 7075-T6 aluminum and designed specifically for Aimpoint T1 and similar red dot optics.
Available in absolute co-witness and lower third co-witness options, with a black or DDC type 3 hard coat anodize.
Features a strong clamping force of 1,400 pounds and 3 shear lugs for maximum rigidity and return to zero.
The Reptilia DOT Mount is designed specifically for the Trijicon MRO red-dot optic, ensuring a secure and compatible fit.
Constructed from 7075-T6 aluminum with a hardcoat-anodized finish, the mount is durable and offers a lower 1/3 co-witness with AR-15 backup iron sights.
Made in the USA, the mount features a snag-free design with flush mounting bolt and clamp, available in black or flat dark earth finishes.
The OPF-M17, ACRO mounting plate is made from 4140 steel with a QPQ coating, ensuring durability and compatibility with Aimpoint ACRO P1/P2 optics.
It is designed for MIL issued M17/M18 and is a direct replacement for the Tangodown SSM-03, providing a reliable mounting solution.
The product includes mounting hardware, a T20 key, and VC-3 thread locker, and is proudly designed and manufactured in the USA by FORWARD CONTROLS DESIGN LLC.
Quick-detach mount designed for Aimpoint Micro series red dots, enabling fast installation and removal.
Constructed from 6061 T6 aluminum with a hardcoat T3 mil-spec anodized finish in matte black for durability.
Mount secures with four steel Torx® screws and positions the T-1 red dot at the lowest possible height.
The BCM A/T Optic Mount offers exceptional zero retention and a "no fail" shot capability, designed for life-saving situations.
Constructed with minimal components for fewer failure points, it features multiple recoil lugs and a patented Angled Torque lock-up for a secure mount.
Made in America, the mount is optimized for a variety of missions and is compatible with the Trijicon MRO optic.
The mount adapter base fits rear sight dovetails on 1911s for easy installation of Burris Docter or similar red dot sights without slide modifications.
Includes an adjustable hex-head screw for secure dovetail locking and two cap screws for attaching the sight to the base.
Made from 7075 T6 aluminum with a hardcoat anodized black finish, compatible with Burris FastFire and Doctor sights but not with J-Point/Optima.
The Scalarworks Leap Mount is the strongest quick-detach mount available for the Aimpoint CompM5, proven through rigorous stress testing.
It is one of the lightest and strongest mounting systems on the market, designed with lessons learned from destructive tests.
Available in 1.42- and 1.57-inch heights, the mount features an all-black finish and is specifically made for the Aimpoint CompM5.
The OPF-G43x/48, RMRcc adapter plate is designed for mounting the Trijicon RMRcc on Glock 43x and 48 MOS slides, featuring a design that eliminates gaps and ensures the sight is as low as possible.
Constructed from 1018 steel with a black nitride finish, the adapter plate is robust, with larger diameter and stronger screws for a secure fit.
The adapter plate weighs 0.75 oz and is specifically tailored for the Trijicon RMRCC, ensuring a snug fit and optimal positioning on Glock 43/48 models.