The ASF-50 is a semi-auto ambidextrous safety selector with a 50-degree short throw and standard levers, designed for defense and combat applications.
It features a strong lever to center interface with tight tolerances to minimize wobble, and the levers have parallel serrations to aid in operation.
The selector includes a spring, detent, levers or end cap, roll pins, and is made in the USA by Forward Controls Design in collaboration with Sons of Liberty Gunworks.
The ADJUSTABLE TURRET CAP (ATA) allows for windage and elevation adjustments on Aimpoint T1/T2 sights without removing the caps, using a coin or cartridge rim.
ATA features a billet machined design with internal O-rings for moisture resistance, matching the water-resistant capabilities of factory caps up to 77ft.
Installation is user-friendly with serrated caps and engraved discs for clear identification, and the product is made in the USA with a U.S. Patent No. 11,054,218.
The AR-15 Standard Triggerguard by Forward Controls Design LLC is machined from 7075 aluminum, hard coat anodized, and features a set screw in the front and a roll pin in the rear for secure attachment.
Designed for TDP spec forged lower receivers, it fills the gap in front of the pistol grip and has a canted front edge to aid in magazine insertion, without the ability to swing down.
Available in Black, FDE, or OD Green, the trigger guard includes a set screw and roll pin, but requires a 1/16 Allen wrench that is not provided.
The Ejection Port Cover is precision machined from 7075 aluminum, hard coat anodized, and designed with unique features for improved usability.
It includes tabs for easier opening and a textured circular depression for tactile feedback when closing the cover.
Designed and made in the USA by Forward Controls Design LLC, the EPC is compatible with TDP spec upper receivers.
The Ejection Port Cover (EPC) is precision machined from 7075 aluminum and features a hard coat Type III anodization for durability.
It includes unique design elements like tabs for easier handling and a shallow circular depression for tactile feedback and better grip during operation.
The EPC is designed to be compatible with TDP spec upper receivers and is made in the USA, with a slight break-in period expected for initial use.
The ASF-50Q is an ambidextrous, short throw safety selector with a 50-degree rotation to FIRE/SEMI and features offset q levers for easier operation without shifting grip.
It is designed for defense/duty/combat with tight tolerances and a strong lever to center interface, using a 420 stainless steel roll pin for attachment.
The levers are serrated for better finger traction during use, and the ASF includes a single dimple as a position indicator, with all parts machined from 8620 steel and black nitrided for durability.
Precision machined from 4130 or 4140 steel and nitrided for durability, the AR-15 Stoner 63 LMG A2 Flash Hider offers superior compensation and flash suppression.
Features unique port design with smaller 3 and 9 o'clock ports for 15-20% better muzzle rise control compared to the A2, while maintaining flash suppression and avoiding increased noise.
Designed and made in the USA, this compact device is compatible with most A2 mounted sound suppressors and includes a crush washer for installation.
The ESF-H1 is a heavy-duty end plate sling adapter designed for AR platform rifles, available in DLC or phosphate coated 4140 steel.
It features rotation limited side sockets and a rear socket without limiters, compatible with QD sling swivels.
Specialized tools like a 2 lug castle nut wrench may be needed for proper installation due to potential obstruction by the socket housing.
The BACKUP IRON SIGHT FOR GLOCK G43X/G48 is a collaboration between Ameriglo and Forward Controls Design, designed for co-witnessing with the Trijicon RMRcc on models G43X and G48.
It features a choice of a serrated front sight without tritium or a non-serrated front sight with tritium, and a serrated rear sight, both designed to minimize snagging.
Installation of the sight may require fitting and should be done by a qualified gunsmith to ensure it remains secure and maintains zero.
The CSF by Forward Controls Design is a durable 2 point adjustable sling with military grade webbing, designed for hard use and intuitive operation.
Features a quick detach buckle on the rear for easy release without pinching fingers, with a total length of 65 inches and 11 inches of quick adjustment.
Made in the USA, this sling does not include swivels and should not be fully disassembled as reassembly may not be possible.
The EMR-A is an ambidextrous, ergonomic magazine release compatible with .223 and .308 AR receivers, featuring a serrated or dimpled lever for improved grip.
Constructed from CNC machined 4140 steel and 7075 aluminum, the EMR-A includes a high-strength magazine catch spring and requires specific installation/removal procedures.
Compatibility issues may arise with certain bolt catches, anti-walk pins, battery assist device levers, and receivers that do not adhere to TDP specs or have a left side fence.
The OPF-G, RMR adapter plate is designed for mounting Trijicon RMR or SRO on various Glock models and is compatible with Glock MOS Adapter Sets 01 and 02.
It offers full support for the sight with recoil lugs, eliminates the need for a sealer plate, and includes Torx screws for secure installation without altering sight height.
Manufactured by FORWARD CONTROLS DESIGN LLC in the USA, the steel adapter plate maintains the Glock MOS's ease of installation and parts commonality.
The OPF-M17, ACRO mounting plate is made from 4140 steel with a QPQ coating, ensuring durability and compatibility with Aimpoint ACRO P1/P2 optics.
It is designed for MIL issued M17/M18 and is a direct replacement for the Tangodown SSM-03, providing a reliable mounting solution.
The product includes mounting hardware, a T20 key, and VC-3 thread locker, and is proudly designed and manufactured in the USA by FORWARD CONTROLS DESIGN LLC.
The M-LOK Cable Management Panel is a secure system for routing cables, compatible with cables up to 0.140" in diameter, and is designed to prevent movement by enclosing cables within the panel.
Constructed from 6061 aluminum with a Type III hard coat anodized finish, the panel features a textured surface and is available in black, FDE, or ODG, measuring 3.14" in length to fill two M-LOK slots.
Each package includes one panel with M-LOK mounting hardware, and the panels can be installed in a staggered configuration; they are made in the USA by FORWARD CONTROLS DESIGN LLC in collaboration with TNVC.
The AR-15 Enlarged Triggerguard from Forward Controls Design LLC is machined from 7075 aluminum, anodized black, and designed for use with TDP spec forged lower receivers.
It features a canted front edge for easier magazine insertion and an enlarged space for use with gloves, but does not swing down like standard trigger guards.
Includes a set screw and roll pin for installation, but requires a 1/16 Allen wrench (not included), and is available in Black, FDE, or OD Green finishes.
The CN5F is an extended castle nut designed specifically for the Vltor A5 system, adding 0.1" in length for better compatibility and coverage on receiver extensions.
It features improved staking notches that are 30 degrees, 25% longer and deeper than TDP spec, with four equally spaced notches for more staking options.
CN5F is constructed from 4140 PH steel, available in various colors including burnt bronze, and is manufactured in the USA by Forward Controls Design LLC.
The OPF-G43x/48, RMRcc adapter plate is designed for mounting the Trijicon RMRcc on Glock 43x and 48 MOS slides, featuring a design that eliminates gaps and ensures the sight is as low as possible.
Constructed from 1018 steel with a black nitride finish, the adapter plate is robust, with larger diameter and stronger screws for a secure fit.
The adapter plate weighs 0.75 oz and is specifically tailored for the Trijicon RMRCC, ensuring a snug fit and optimal positioning on Glock 43/48 models.
The CNF is an enhanced castle nut with 4 staking notches for improved security and is made from 4140 PH steel, with a black nitride finish.
Designed by Forward Controls Design LLC, the CNF features coarse serrations for better grip and is available in multiple colors including Flat Dark Earth.
It is a proudly made in the USA product, specifically tailored for AR-15 rifles, ensuring high-quality and compatibility.
The OPTICS INTERFACE PLATE is precision machined from 4140 steel and black nitride coated for durability, designed specifically for Smith & Wesson M&P CORE 2.0 pistols.
It features tight tolerances to minimize movement and includes fences to secure older optics like RMR, while still accommodating newer sights such as DPP and RMRcc.
The plate is made in the USA by Forward Controls Design LLC, with specific torque values provided for different sights and a weight of 1.49 oz.
The FLARED MAGAZINE FLOOR PLATE is a machined aluminum replacement for Glock 9mm and .40 cal double column magazines, designed for duty and defense with a flared version available.
It features a front lip with a reverse angle for better manual magazine removal and flutes on the sides for improved grip, enhancing the built-in Glock feature for magazine stripping.
Compatible with Glock, this floor plate is hard coat anodized, subtly designed with a small Cygnus logo, and has dimensions and weight provided for comparison with factory Glock magazine floor plates.