Help and contact
(0) Basket
Newsletter
Home
Optics & Mounting
Electronic Sights
Mounting Hardware
FORWARD CONTROLS DESIGN OPTIC PLATFORM FOR GLOCK® MOS
Support
FORWARD CONTROLS DESIGN
OPTIC PLATFORM FOR GLOCK® MOS
99.9
109.9
4
GBP
Product no.: 100042419
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR TRIJICON RMRCC FOOTPRINT FITS GLOCK MOS
Mfr Part: OPF-G, RMRCC 687408648623 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR TRIJICON RMRCC FOOTPRINT FITS GLOCK MOS
Mfr Part: OPF-G, RMRCC 687408648623 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
Specs:
Color: Black
Fits / Used For: Trijicon RMRCC
Make: Glock
Model: 17, 19, 34, 35, 41, 40
Product no.: 100042418
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR TRIJICON RMR FITS GLOCK MOS
Mfr Part: OPF-G, RMR 686162347902 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR TRIJICON RMR FITS GLOCK MOS
Mfr Part: OPF-G, RMR 686162347902 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
Specs:
Color: Black
Fits / Used For: Trijicon RMR, Holosun 407C V2, Holosun 507C, Holosun 407C, Trijicon SRO, Holosun 508T V2, Holosun 507C V2, Holosun 508T
Make: Glock
Model: 17, 19, 34, 35, 41, 40
Product no.: 100042420
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR LEUPOLD DELTAPOINT PRO FITS GLOCK MOS
Mfr Part: OPF-G, DPP 687408648548 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR LEUPOLD DELTAPOINT PRO FITS GLOCK MOS
Mfr Part: OPF-G, DPP 687408648548 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
Specs:
Color: Black
Fits / Used For: Leupold DeltaPoint Pro
Make: Glock
Model: 17, 19, 34, 35, 41, 40
Product no.: 100042421
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR AIMPOINT ACRO FITS GLOCK MOS
Mfr Part: OPF-G, ACRO 686162347971 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
FORWARD CONTROLS DESIGN SIGHT MOUNT FOR AIMPOINT ACRO FITS GLOCK MOS
Mfr Part: OPF-G, ACRO 686162347971 OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides. We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives: Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. Eliminate the need to use an additional sealer plate. Correct length sight to plate, and plate to slide screws. Screws are to be Torx. Adapter plate is to be machined in steel. OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. Weight: 0.83oz Plate to slide torque value: 13 to 15in/lb Sight to plate torque value: 13in/lb Proudly designed and made in the USA.
Specs:
Color: Black
Fits / Used For: Aimpoint ARCO
Make: Glock
Model: 17, 19, 34, 35, 41, 40
Upgrade your Glock with the OPTIC PLATFORM for seamless Trijicon RMR mounting. 🥇 Enjoy easy installation and robust support for your sights!
Classical view
Mobile view