M-LOK Type 2 Rail Covers are two-piece, low-profile covers designed for M-LOK systems, with a non-orientation specific design for versatile mounting.
The covers feature Magpul TSP texture for improved grip and a beveled contour to reduce snagging, adding minimal bulk to the rail.
They come with a pre-scored locking tab for easy customization and mixing of colors, and the package includes six panels, each covering one M-LOK slot.
Designed for M-LOK compatible handguards, the MAGPUL rail allows attachment of 1913 Picatinny spec accessories.
Made from a reinforced polymer, offering strength and lightweight with beveled ends to prevent snagging.
Comes in various lengths with the 5-slot version being 2.375 inches and includes all necessary hardware for easy installation.
The MDT M-Lok Arca Swiss Rail is designed for attaching MDT Chassis rifles to ARCA interfaces on tripods and support gear.
This rail is available in both a standard flat profile for general M-LOK surfaces and an angled profile to match the MDT LSS-XL Gen2 underside.
Constructed from aluminum with a Mil-spec Type III hard-black anodization, the rail is durable and available in multiple lengths.
The MDT M-LOK Baker Wings are designed to enhance stability and control for shooting from unstable positions and when using a front bag.
They are compatible with any M-LOK chassis or stock and specifically fit MDT ACC, ESS, TAC21, and LSS-XL Gen2 chassis, as well as precision AR-10/15 forends.
Each wing is 229 mm long, adds approximately 2 inches in width to the forend, and is made from 6061-T6 aluminum, weighing 0.84 lbs.
The Magpul Barricade Stop is designed for stable shooting off barricades, featuring a polymer body and a replaceable, textured steel plate.
It is compatible with M-LOK Handguards and includes two sets of M-LOK hardware for easy attachment.
The product is made in the USA, with dimensions of 1.77L x 1.03W x 1.2H inches, and is specifically tailored for AR-15 firearms.
The M-LOK Hand Stop Kit is designed for improved weapon control and can be used as a forward stop to prevent hand contact with hot areas.
Kit includes a hand stop, index panel, rail cover, and an adapter for use with Magpul M-LOK handguards or wider profile rails.
Constructed from polymer, the kit is lightweight, low-profile, and comes in black, specifically tailored for AR-15 style rifles.
Bravo Company's BCM M-LOK Rail Panels are designed to cover unused M-LOK slots, enhancing grip and comfort.
The panels are made from a flexible, cuttable polymer and are bi-directional for easy installation.
They are ventilated for cooling, fit BCM MCMR handguards, and come in a 5-pack with a black or flat dark earth color option.
Ergo Grip Slim-Line rail covers protect Picatinny rails and prevent damage to gear and surroundings.
Made from Santoprene, they offer a low profile, non-slip surface for better grip, and can be easily trimmed for custom fit.
Designed for AR-15s, these black polymer rail covers are 7 inches in length and come in a 3-pack.
ERGO ladder rail covers are designed to protect Picatinny rails and provide a comfortable grip.
Each cover fits over 25 slots and the pack includes 3 covers, suitable for AR-15 style rails.
The covers are made from black polymer, ensuring durability and compatibility with other gear.
M-LOK Type 2 Half Slot Rail Covers are low-profile, customizable covers for M-LOK aluminum hand guards, allowing for a mix-and-match of colors and full coverage customization.
These rail covers are non-orientation specific with beveled contours to reduce snagging and feature TSP texture for improved grip, barely extending beyond 1/8” from the mounting surface.
Compatible with most M-LOK handguards except MAGPUL MOE M-LOK, MOE SL, SGA fore-ends, and certain free-float handguards, they can be easily installed or removed in seconds.
The MAGPUL AR-15 Direct Thread XTM Handstop Kit is a lightweight, low-profile weapon control accessory.
The kit includes four pieces: Hand Stop, Index Panel, Full XTM Enhanced Panel, and XTM Enhanced Half Panel.
Available in three colors: Black, Flat Dark Earth, and OD Green, made of polymer material for the AR-15.
The Area 419 Fixed Barricade is a non-moveable stop designed for 12” Arcalock and MPA rails, providing a stable rear barricade.
It includes a 3/32 wrench for installation, features a grooved surface for grip, and is machined from 6061-T6 Aluminum with a Type III Black Hardcoat Anodized finish.
The barricade uses a pinch clamp and set screw for secure attachment, preventing slippage by engaging with the ARCALOCK cuts.
Constructed from 6061 aluminum with a hard coat anodized finish, ensuring durability and a lifetime of service.
Designed as a one-piece Picatinny scope rail, it is 5.0 inches long and includes mounting screws for easy installation.
100% Made in the U.S.A., this top rail fits Marlin 1894 models and is compatible with Henry 38/357, 44 Mag, and 45 Colt receivers, carrying a lifetime warranty.
Tough polymer Magpul rail cover protects hands from sharp edges and shields rails during tactical operations.
Features a rubber-like, pebble-texture grip for better control; each panel covers 15 Picatinny rail slots.
Easy to cut pre-segmented panels for custom fit, with the ability to mount multiple sections for longer handguards.
The ARCALock Universal Flat Rail features a proprietary clamp design for a secure mechanical lock, preventing sliding under pressure.
It is compatible with all standard ARCA-style accessories, with radiused edges to prevent snags or cuts.
Constructed from 6061-T6 aluminum with a Type 3 hard-coat anodizing, it is designed for versatility across various stocks.
The M-LOK T-Nut Replacement Set is compatible with all M-LOK accessories and is made of durable 4140 Chromoly steel with a Manganese Phosphate finish.
It includes two lengths of button-head socket cap screws to accommodate various hand guard or forend thicknesses.
Screws feature a self-locking reusable thread patch for a secure installation, ensuring the hardware remains firmly in place.
The Area 419 Arcalock 14" Universal Dovetail Rail features a proprietary clamp design with 65 locking positions for a secure mechanical lock, preventing any movement.
It is compatible with standard Arca accessories and follows the RRS 1.5" Dovetail Standard, ensuring lever clamps fit properly.
Constructed from durable 6061-T6 Aluminum with a Type 3 Hard Coat anodized finish, the rail can be attached at up to 4 points on various rifle and stock configurations for enhanced stability.
The Strike Industries M-LOK Covers are made from hardened nylon polymer, designed to protect the handguard by absorbing impacts and preventing damage to the rail system.
These covers offer unlimited placement options with single slot pieces for M-LOK systems, enhancing grip through aggressive texturing and maintaining open slots for ventilation or accessories.
The package includes five covers in Flat Dark Earth (FDE), featuring an ultra-slim, bi-directional, non-slip textured surface for improved weapon control.