The Strike Industries Striker Spring set for Glock offers a range of springs (4 to 6 pounds) for customizing trigger pull tension.
Includes four different springs to adjust firing characteristics for competition, standard, and duty use.
Not suitable for Glock models G42 or G43, and springs below 5.5lbs are not recommended for duty or self-defense.
The EGW O/S Firing Pin Stop is designed for a tight fit to improve extraction and feeding, with a square bottom edge for gunsmith fitting.
Made of heat-treated carbon steel or stainless steel, it is wider, thicker, and more durable than standard firing pin stops.
Available for Series 70 and Series 80 Colt pistols and clones, in two finishes: black oxide for carbon steel and natural for stainless steel.
The Extreme Service firing pin stop is designed for high recoil 1911s and those with shorter slides, improving performance and reliability.
Made from oil-quenching tool steel for balance between impact and wear resistance, it is customizable to prevent extractor "clocking".
Features such as a 3/64" radius and a 3 degree angle at the top rear face slow the slide's rearward speed, reducing malfunctions.
EGW oversized firing pin stop is designed for slides with a rear Bomar cut, enhancing reliability by preventing extractor rotation and ejection issues.
The firing pin stop is thicker to reduce lateral movement and has radiused inside corners to increase durability by preventing cracking.
This aftermarket part requires fitting and is compatible with all 1911 models; however, Series 80 firing pin stops can be used in Series 70 guns, but not vice versa.
The firing pin is precision-machined from stainless steel for a secure fit and to prevent primer flow.
There are separate models available for .45 ACP and 9mm/.38 Super to ensure proper weight and size for reliable ignition.
It is designed for 1911 models including the Government, Commander, and Officers in calibers 38/357 (.357-.359) and 9 mm (.355-.356).
EGW firing pins are precision machined from extra-hard stainless steel for durability and to prevent primer flow with hot loads.
Available in three diameters (.068", .075", .093") to ensure proper clearance and fit for various 1911 models.
Designed to fit specific calibers and models, with the .068" typically fitting Colt and Caspian, the .075" for Springfield Armory, and the .093" for most .45 ACP.
The Volquartsen SureStrike Firing Pin is designed for Ruger® MKI, MKII™, & MKIII™, including 22/45™ and is made from A2 tool steel for minimized light hits.
It features a .004" wider pin to reduce side-to-side movement and is surface ground for a precise hit, hardened to RC56-58 to prevent deformation.
The Exact Edge Extractor, also EDM machined from A2 tool steel, maintains exact tolerances, will not lose its edge under impact, and has a hook point hardened to RC58-60.
The TANDEMKROSS "Fire Starter" Titanium firing pin is 40% lighter than steel, which helps reduce lock time and potentially improves accuracy.
Constructed from titanium, the firing pin is non-corrosive, highly durable, and performs reliably in extreme temperatures.
Compatible with a wide range of Ruger® MK series firearms and comes with a TANDEMKROSS LIFETIME guarantee.