The Swage Gage Primer Pocket Gauge allows you to check the depth and diameter of primer pockets for small or large primers.
Using the "Go" end, you can determine if the primer pocket depth is correct, the crimp is properly removed, and if the pocket is not too loose.
If the "No Go" end fits into the primer pocket, it indicates that the pocket is too loose to securely hold a primer, and the brass should be discarded.
Lyman's 6.5 Creedmoor case length/headspace gauge ensures safety and accuracy by verifying the headspace dimension after resizing bottleneck rifle cases.
Using the gauge is simple: insert the case to check that it meets the minimum and does not exceed the maximum allowable headspace.
Any case that exhibits excessive headspace should be considered unsafe and must be destroyed immediately to prevent potential hazards.
The WILSON CASE GAGE is crucial for setting up resizing dies and preventing the oversizing of brass during reloading.
It allows for quick and accurate measurement of headspace and overall case length, indicating when trimming is necessary.
Special order case gages are available for measuring case length only, and there is an adjustable style specifically for belted magnum cartridges to extend case life.
The RCBS Pistol Chamber / Cartridge Gauge allows for quick checks of case length, diameter, and overall cartridge length of handloaded pistol ammo.
If a loaded round fits into the gauge, it is confirmed to fit the chamber of your pistol.
It is a one-piece, non-adjustable gauge with easy-to-read engravings for caliber size, specifically designed for 45 Auto (ACP) cartridges.
The Neck Tension Gage Tool is used to measure and ensure consistent neck tension for better bullet seating in reloading operations.
It can detect the presence of a "donut" at the neck-shoulder junction and helps determine the optimal inside neck diameter.
The tool comes with four stepped diameters for different calibers, and the kit includes all five caliber sizes.
The ARMANOV Gauge Box is a tool for checking the consistency of .40 S&W ammunition, designed to prevent malfunctions caused by defective brass.
It features a 100-round capacity with a flip cover for easy transfer of ammo and is constructed from high-grade aluminium to CIP tolerances.
The gauge box includes a caved level design for quick ejection of rounds and is compatible with MTM case guard boxes or Dillon precision ammo boxes.
The ARMANOV OAL Checker is an upgrade for the new model Ammo Checker with an edge on the bottom, not compatible with the original flat-bottom model.
Designed for calibers 9 x 19 mm, 9 x 21 mm, 38 SuperComp, 40 S&W, 10 mm Auto, and 45 ACP, it helps identify improperly seated bullets and contributes to ammo uniformity.
The package includes the OAL Uniformer made of clear Acryl, with other items shown in images or videos, like the Ammo Checker or MTM ammo box, not included.
The Frankford Arsenal Cartridge Overall Length Gage is a tool for determining the optimum OAL (Overall Length) for any bullet using a cleaning rod and a set of calipers.
This kit includes two clamps that attach to a cleaning rod of ¼” diameter or less, allowing for easy measurement of bullet seating depth.
The gage can be used on all rifles and is useful for both measuring the distance between clamps to find OAL and checking seating depth during the reloading process.
The ARMANOV Case Gauge is a precision tool for checking .300 AAC Blackout ammo to SAAMI specs, ensuring reliability.
Its stackable design allows for quick sorting of 10 rounds at a time and compatibility with MTM and other ammo boxes.
It doubles as an OAL checker and is machined from high-quality aluminum for durability and accurate reaming.
The ARMANOV Stencil is designed for marking ammunition brass and is compatible with the ARMANOV Ammo checker.
Each stencil set includes a steel stencil and one color marker, and is made from stainless steel, making it durable and reusable.
Accessories shown in photos or videos, such as the Ammo checker, are not included with the stencil set.
The Sinclair Case Neck Sorting Tool helps reloaders sort brass by neck wall thickness for improved consistency and accuracy in sealing the chamber.
It accommodates a wide range of case calibers from 22 to 45 and can also work with 17 and 20 caliber cases using an optional carbide alignment rod.
The tool can be used with a .001" reading dial or digital indicator for precise measurements and supports comfortable use with its low profile and stable platform.
The HEADSPACE GAUGES by FORSTER PRODUCTS, INC. are essential for checking the chamber length of rifles, crucial for safety and accuracy, especially when fitting new barrels or buying used firearms.
These gauges are made to SAAMI specifications and the 30 M1 CARBINE NO-GO GAUGE is specifically .0005 inch under 7.62 NATO NO-GO dimensions.
The product is machined steel and interchangeable between calibers within the same stock number, with the .30-30 Carbine gauge compatible with a range of cartridges including .219 Wasp, .30-30, and .38-55.
The BRASS CASE GAGES by L.E. WILSON, INC. is designed to check the overall length and headspace of 223 Remington cases to ensure safe and accurate reloading.
Made of brass, this one-piece gage offers excellent corrosion resistance and surface finish, enhancing the durability and reliability of the tool.
Originally invented in 1935 by Sam (L.E.) Wilson, the Cartridge Case Gage helps prevent over sizing and case separation issues for rimless cases.
The Redding 220 Swift Instant Indicator is designed for precision measurement of headspace and bullet seating depth to within .001".
It enables quick comparison of bullets, seating depths, cases, and loaded ammunition to assess uniformity.
The tool comes with a dial indicator and various components such as a bore diameter bushing, surface contactor, and headspace gauge for comprehensive case and ammunition analysis.
The EGW 4 Caliber Checker is a tool that can check four popular calibers: 9mm, .38 Super, .40 S&W, and .45 ACP.
It is designed to prevent jams, misfires, and other malfunctions by ensuring ammo is within spec.
The checker is made from machined 6061 T6 aluminum, anodized in black, and measures 3” long, 1” wide, and 1¼” high.
The Sinclair Chamber Length Gauge helps determine the true chamber length from the bolt face to the chamber's neck end, revealing excess case length over published trim lengths.
Made of 12L14 soft steel to avoid chamber damage, the gauge is reusable and comes with step-by-step instructions for proper usage.
Specific caliber limitations exist; the 22 caliber gauge won't work on thin-necked cases like the 22 Hornet, and the 30 caliber gauge is incompatible with the 30-30 Winchester.