Redding's 300 PRC Full Length Sizing Die sizes the entire cartridge, including neck and body.
It comes with a decapping assembly and expander ball, and is available individually or in sets.
Using a headspace gauge is recommended when setting up this full length sizing die.
The Lee Factory Crimp Die firmly crimps bullets, enhancing shooting accuracy even for bullets without a crimp groove.
It creates a higher start pressure for a more uniform pressure curve and less velocity variation.
Designed to fit all 7/8"-14 reloading presses, the die features a collet for crimping and does not include a shellholder.
Forster Bench Rest Die Sets provide consistent concentric rounds with high-quality steel and precise machining.
The set includes a full length sizing die and a Bench Rest seater die, featuring the exclusive Forster Cross Bolt Die Locking Ring and E-Z case neck expander system.
Designed for the 22 Creedmoor cartridge, the dies have a diameter of 0.875 inches and the National Match Dies option reduces headspace by .003" for bolt action target rifles.
The Redding GRX Push Thru Base Sizing Die is specifically designed to remove bulges near the case base of 40 S&W brass.
By passing the entire case through the die, the brass is reshaped and can be reused.
The GRX Sizing Die is exclusively available for the 40 S&W cartridge.
The die sizes the cartridge during crimping, ensuring each round chambers freely with reliability.
Adjusting screw allows for quick and easy setting of the crimp amount without the need for case trimming and chamfering.
Constructed of steel with an internal carbide ring, eliminating the need for case lube.
The RCBS 3-Die Carbide Taper Crimp Set includes a carbide sizer die that removes the need for case lubrication.
It comes with an expander die for expanding and belling case mouths to prepare for bullet seating.
The set features a seater die that provides either profile or taper crimping for 45 ACP cartridges.
The Redding Premium Handgun Die Set includes a Titanium Carbide-sizing die, an expander die with a TiN-coated plug, and a seating die with Bullet Seating Micrometer.
The expander die features a unique design that improves bullet seating and alignment, reduces brass build-up, and is beneficial for high volume reloaders.
The set is designed for ease of use with progressive reloading presses and includes either a taper or roll crimp appropriate for the 380 Auto (ACP) cartridge.