Hardened stainless steel neck bushing designed for precision sizing in .001” increments with a .003” taper for fine-tuning neck tension.
For emergency use or fine-tuning, the bushing can be flipped to achieve tighter sizing if brass no longer holds the bullet properly.
Compatible exclusively with L.E. Wilson dies and not interchangeable with Forster or RCBS dies; two methods provided for selecting the correct bushing size.
Redding's Titanium Nitride Neck Bushings are heat treated steel bushings with an additional Titanium Nitride coating for increased hardness and reduced friction.
The bushings are available in a range of sizes from .185" to .368", in .001" increments.
The specific size of the bushing is indicated by the last three digits of the part number, with this particular bushing being .336" in diameter.
The Accu-Ring serves as a die lock-ring with reference marks for precise adjustments in increments of 0.001 inches, primarily for sizing dies to set headspace length.
It can also be used for making fine adjustments to bullet seating depths when used with seater dies.
The actual movement per reference mark on the Accu-Ring is 0.000998 inches, which is effectively one thousandth of an inch (0.001”) for use in the Co-Ax® Reloading Press.
The L.E. Wilson Micrometer Top Bullet Seater Die provides precise bullet-seating depths with a micrometer top that measures in 0.001” increments.
Constructed from durable stainless steel, this die is designed for the 300 Winchester Magnum cartridge and ensures consistent and accurate reloading.
Designed to be used with an Arbor Press, the seater die allows for adjustments at the range, saving multiple trips by enabling on-site fine-tuning of seating depth.
Redding's 300 PRC Full Length Sizing Die sizes the entire cartridge, including neck and body.
It comes with a decapping assembly and expander ball, and is available individually or in sets.
Using a headspace gauge is recommended when setting up this full length sizing die.
The kit includes a full-length bushing resizing die, seater die, and a case-length headspace gauge for .308 Winchester.
Features include an adjustable depth decapping rod, a micrometer top for precise seating adjustments, and does not require an expander.
Designed for use with a mallet or an arbor press and not compatible with conventional 7/8" presses.
Forster Full Length Sizing Dies are made from high-quality steel and machined to precise tolerances, ensuring concentric rounds for reloaders.
The dies include a Forster Cross Bolt Die Locking Ring for secure locking without damaging the threads, and an E-Z Out Expander button for maintaining neck concentricity.
Designed for the .223 Remington cartridge, these Full Length Sizing Dies are part of Forster Products, Inc.'s lineup of premium rifle dies.
The Redding Type S Bushing Full Length Sizing Dies provide precise full length resizing with exact control of the case neck in one operation.
These dies use interchangeable bushings for flexibility and have an adjustable decapping rod to size part of the neck if needed, enhancing concentricity.
Each die comes with a standard size button and a decapping pin retainer, and can also function as a body die when internal parts are removed.
The RCBS MatchMaster Competition Full Length Bushing Die Set for .223 Remington features a titanium nitride coated expander for smooth case extraction. (NOTE: Neck Bushings Not Included)
It includes a MatchMaster Competition Seating Die with a micrometer adjustable, free-floating, self-centering bullet seating stem, and a bullet loading window with a retaining system for easy and accurate bullet seating.
Designed for precision handloading, the set aims to produce the most precise ammunition possible, enhancing the performance for competitive shooting.
The set includes a full length-resizing die, a collet neck sizing die, an Easy Adjust Dead Length Bullet seating die, and a Factory Crimp die for maximum versatility and precision.
No case lube is needed, and the design ensures that cases last almost indefinitely while providing factory-like accuracy and dependability.
Accessories include a shell holder, powder measure, and Lee load data to facilitate reloading with all common powder brands.
The Sinclair/L.E. Wilson Micro-Adjust Bullet Seater allows for precise seating depth adjustments with .0005” increment clicks and a graduated scale for consistency.
Each seater stem is custom fitted to its body for close tolerance, and the die is constructed of 416 Stainless Steel for durability.
The bullet seating die is made in the USA by L.E. Wilson, leveraging 85 years of experience, and is available for 12 popular cartridge types including the 308 Winchester.
Forster Ultra Micrometer Seater Dies provide exceptional quality, enabling the production of concentric rounds with precise machined steel and polished finishes.
The dies include a Cross Bolt Die Locking Ring for secure locking without thread damage and a micrometer adjustment for precise bullet seating depth control.
Designed specifically for 6.5 PRC cartridges, these dies allow for easy bullet seating depth adjustments in .0005 inch to .001 inch increments for optimal bullet-to-rifling alignment.
The Lee Factory Crimp Die firmly crimps bullets, enhancing shooting accuracy even for bullets without a crimp groove.
It creates a higher start pressure for a more uniform pressure curve and less velocity variation.
Designed to fit all 7/8"-14 reloading presses, the die features a collet for crimping and does not include a shellholder.
Forster's locking ring design uses a cross bolt to prevent misalignment and damage to die threads.
The locking ring is compatible with any standard 7/8-14 dies and is tightened with a 7/64" hex wrench.
Made from Aluminum, these locking rings are included with Forster's high-quality Bench Rest® Dies.