EGW Mossberg scope bases enable quick, drill-free attachment of Picatinny or Weaver rings on Mossberg 500, 590, 835 shotguns post-1997.
Precision machined from 7075 T6 aluminum for durability, with a design that maintains a low profile to improve accuracy.
Includes all necessary mounting hardware with recommended torque specifications and loctite for secure installation.
The AIMTECH Winchester 1300 12GA Scope Mount is a lightweight, balanced support system for scopes, designed to withstand slug recoil.
Installation is quick, requiring only the replacement of the trigger group pins with the included bolts.
It is made of anodized aluminum, comes in black, and requires Weaver-style rings (not included) for scope attachment.
The Mesa Tactical Sureshell Carrier and 20” Rail is designed for the Remington 870 and Mossberg 500/590, holding 6 12 gauge shells and allowing for a variety of optics.
It features a 20” Picatinny rail that accommodates AR-15 iron sights, various optics, sling mounts, and lights due to its generous size.
Constructed of aluminum with a black finish, the Remington 870 model supports factory magazine extensions, while the Mossberg 500 model includes a Magon magazine clamp for easy field stripping.
The REM TACTICAL SHOTGUN RAIL is precision machined from Tennalum® 7068, providing steel-like strength at a fraction of the weight.
Designed for sleekness and snag-free use, it has fully CNC chamfered edges and a low profile, with a Mil-A-8625 hardcoat anodized matte black finish.
It fits Remington models 870, 1100, and 11-87 Tactical without modification, but other models may require drilling and tapping.
Compatible with Benelli M4 and allows mounting of Aimpoint T1, T2, H1, H2, and clones.
Features lower 1/3 co-witness with standard iron sights through a red dot.
Made from Hard Coat Anodized 6061 Aluminum and includes necessary mounting screws.
The SYNC Mount enhances shotgun effectiveness with red dot sights while keeping factory ergonomics.
Features a low-profile, lightweight design using 7075-T6 aluminum, ensuring strength without added bulk.
Patented Key-Slot mounting distributes impacts across four anchors, compatible with Benelli M4/M2/SBE.
The EGW Browning A-Bolt 12 Gauge Scope Bases allow for easy attachment of Picatinny or Weaver scope rings without the need for drilling or tapping.
Precision machined from 6061 T6 aluminum, these bases are designed to fit the factory scope mount holes and offer flexibility in scope positioning and choice.
They come with all necessary mounting hardware, including Torx® screws and wrench, and recommend using 20 inch lbs of torque and a drip of blue loctite for secure installation.
The Aridus Industries Co-Witness Ready Optic Mount enhances the Beretta 1301 Tactical by allowing the addition of an Aimpoint Micro for improved target acquisition.
This mount replaces the factory rail and rear sight, includes a ghost-ring rear aperture from XS Sights, and requires a separate front sight for a backup sighting option.
It is specifically designed for the Beretta 1301 Tactical model and not compatible with the Competition model due to different hole spacing.
The EGW Winchester 1300 Scope Base is a one-piece Picatinny rail that allows for easy changes to eye relief and scope choice without drilling or tapping.
Constructed from 6061 T6 aluminum, the base is precision machined to MIL-STD 1913 specifications, ensuring reliability and durability.
Installation is facilitated with included Torx® screws and wrench, and it is recommended to use 20 inch lbs of torque and a drip of blue loctite.
The BENNELLI TOP MOUNT BASE is a one-piece Weaver rail designed for mounting optics on various Benelli shotguns.
It is made from lightweight, hardcoat anodized aluminum and includes steel mounting screws for attachment.
Compatible with a range of scopes and red dot optics, it maintains a low profile to allow the use of the shotgun's front sight.
Lightweight aluminum Weaver-style bases suitable for a range of rifles, shotguns, and handguns.
Both one piece bases and base pair sets are available, with sets indicated by * or **.
Compatible with Mossberg models 500 and 835, sold individually as front or rear base.
The EGW Benelli Super Nova Scope Base is a one-piece Picatinny rail that allows for easy adjustments to eye relief and scope choice without the need for drilling or tapping.
Precision machined from 6061 T6 aluminum, the scope base is drilled to fit factory mount holes and accepts both Picatinny and Weaver rings.
It features a lightweight design with a milled center channel, full-width cross-slots to MIL-STD 1913 specs, and comes with Torx® screws and a wrench for installation.
EGW Remington 870 Scope Bases allow for easy attachment of scopes without drilling or tapping, using existing mount holes.
The bases are precision machined from 6061 T6 aluminum, with Picatinny/Weaver ring compatibility and a milled center for weight reduction.
Installation requires 20 inch lbs of torque, a drip of blue loctite, and comes with the necessary Torx® screws and wrench.
EGW Savage 210 Scope Bases enable easy attachment of scopes without drilling, using a one-piece Picatinny rail machined from extruded aluminum.
These bases are compatible with both Picatinny and Weaver rings and are designed to fit factory scope mount holes on the receiver.
Includes Torx® screws and wrench for installation, with recommended 20 inch lbs of torque and blue loctite for secure mounting.
The NO-GUNSMITH CONVERTA SHOTGUN MOUNT allows for easy attachment of optics or laser sights to Mossberg 500/835 shotguns without permanent modifications.
It features a low-profile, form-fitting design with a 5" Weaver-style rail and seven cross-slots for flexible accessory placement.
The mount is made from rugged, reinforced polymer that withstands extreme temperatures, and includes all necessary hardware and tools for installation.
The HAVLIN Mossberg Scope Rail is designed for a perfect fit on Mossberg 500/590 and 835 models, ensuring a durable and seamless installation.
Constructed from lightweight, extruded aluminum with an anodized finish to match Mossberg receivers, it's built to withstand recoil without damage.
It comes with four 8-40 TPI machine screws for mounting and accepts all Weaver-style scope mounts and accessories.
EGW Mossberg scope bases allow for easy attachment of Picatinny or Weaver rings without drilling or tapping.
Precision machined from 6061 T6 aluminum, ensuring durability and a perfect fit to the shotgun's receiver.
Designed for post-1997 Mossberg models 500, 590, 835, 930, and 935, with included hardware for installation.
Easy installation on Remington shotguns without drilling or tapping, fitting models 11-87, 1100, Versamax, and V3.
Precision machined from 6061 T6 aluminum for durability with a Picatinny design for flexibility in scope mounting and eye relief adjustment.
Includes necessary mounting hardware with recommended torque settings and loctite for secure attachment.
EGW Savage 212 Scope Bases enable easy attachment of scopes to shotguns without drilling, using a one-piece Picatinny rail made from precision machined extruded aluminum.
The base is drilled to fit factory mount holes and accepts both Picatinny and Weaver rings, featuring a milled center channel for weight reduction and full-width cross-slots to MIL-STD 1913 specs.
It comes with all necessary mounting hardware, including Torx® screws and a wrench, and requires 20 inch lbs of torque and a drop of blue loctite for installation.
EGW Savage 220 Slug Gun Scope Bases provide a one-piece Picatinny rail for easy scope mounting without the need for drilling or tapping.
The bases are precision machined from 6061 T6 aluminum, ensuring a durable and reliable platform for scope attachment.
Designed to fit factory mount holes on the Savage 220, these scope bases accept both Picatinny and Weaver rings and come with the necessary mounting hardware.