Standard thickness grip screw bushings can replace damaged or stripped bushings.
Factory installed bushings may need rear staking removal for new installation, and can be secured with re-staking or loctite 271.
The bushings are sold in sets of 4 and are compatible with 1911 models: Government, Commander, and Officers.
Challis hex drive bushings allow for secure installation and removal without damaging the gun, using a 7/32” nut driver for optimal thread engagement.
The bushings are reusable and can be equipped with optional O-rings to keep grips tight, protect the frame from scuffing, and absorb shock.
Designed for 1911 models, these bushings are suitable for grips with a minimum thickness of 0.24 inches and come in a pack of four.
Challis Hex Drive O-Rings secure 1911 grips, preventing damage and movement during recoil.
They are replaceable, made of long-wearing synthetic rubber, and available in 8 or 24 packs.
These O-Rings protect the frame from abrasive materials and enhance grip stability for materials like carbon fiber and titanium.
Challis 1911 Grip Screw O-Rings prevent grip screws from loosening and stabilize grip panels during recoil.
Compatible with all 1911 grip screws and bushings, but optimized for use with Challis hex drive grip bushings.
Constructed from long-wearing synthetic rubber, these O-rings should be replaced periodically to maintain effectiveness.
Challis hex drive bushings feature a design that allows for secure installation and removal without damaging the gun or bushing, using a 7/32” nut driver for enhanced thread engagement.
The bushings are reusable and compatible with an optional O-ring to keep grips tight, protect the frame, and minimize shock to grips and bushings during discharge.
Specifically designed for 1911 models including Government, Commander, and Officers, and intended for use with grips that are at least 0.24" thick.
Challis hex drive bushings use a 7/32” nut driver for easy installation and removal, reducing the risk of cross threading and damage to the gun.
The bushings are designed for multiple reuses and can be paired with optional O-rings to keep grips tight and protect against shock and abrasion.
Specifically made for 1911 models, these bushings require the Challis Oversize Thread Bushing Tap for installation and are suitable for grips not less than 0.180" thick.