The BOLT CATCH PUNCH SET includes two punches designed for easy access to the bolt catch retaining pin without damaging the lower receiver.
It features a flat-side punch to sit flush against the receiver and an extended 5/32" roll pin punch for reaching the pin.
The set includes a magnetized roll pin starter punch to hold the roll pin, eliminating the need for an additional hand during replacement.
The Wheeler Engineering® Roll Pin Punch set is crafted from hardened steel to resist bending or breaking.
Designed with a hemispherical tip, the punches ensure proper alignment and prevent damage to both firearm and roll pin.
This 9 piece set includes a range of sizes from 5/16″ to 1/16″ and comes with a convenient nylon pouch for storage.
The PRO+ 5 Piece Brass Punch Set is designed for various gunsmithing tasks such as assembly/disassembly of firearms, pin installation/removal, and parts alignment.
Made in the USA, the set includes five corrosion-resistant brass punches with a hex design and chamfered striking surfaces to minimize burring.
The punch sizes included are 3/32, 3/16, 5/32, 1/8, and 1/4 inches, each measuring 4 inches in length.
The NYLON/BRASS DRIFT PUNCH by BROWNELLS features a hi-impact steel handle with a knurled grip for precision and control.
It includes interchangeable and replaceable tips in various materials like Nylon, Brass, and Aluminum, tailored for non-marring or slightly marring impacts.
Specifically designed for Remington shotguns, it has a .165" Nylon tip for safe removal of trigger plate pins from models 870, 1100, and 1187.
The Accu-Punch Master Set includes a variety of punches such as standard, roll pin, and specialty punches, catering to different gunsmithing needs.
Constructed with hardened steel and nickel plating, the punches are designed for durability and corrosion resistance, featuring hex-shaped handles and rubber O-rings for precise control.
The set comes with a proprietary Pin Alignment Tool for easy and accurate alignment of tiny pins, enhancing the efficiency of firearm assembly and disassembly.
Grace USA 7 Punch Set includes hardened steel punches designed for easy removal of roll pins in firearms.
The set features a balled tip on each punch to prevent damage to the pins during removal or installation.
Comprises seven different sizes of carbon steel, heat-hardened punches ranging from 1⁄16" to 7⁄32" in diameter.
The Wheeler Delta Series AR Pivot Pin Install Tool is specifically designed for the AR-15, M4, or M-16 firearms.
This tool facilitates quick and easy installation of pivot springs and detents without hassle.
Constructed from black zinc plated steel, the tool is durable and includes a key ring for convenient storage.
The Wheeler Engineering® Roll Pin Starter Punches are made from hardened steel for durability.
They feature a hemispherical tip for proper alignment and to prevent firearm and roll pin damage.
The set includes 9 different sizes of punches, from 5/16″ to 1/16″, and comes with a nylon pouch.
The Roll Pin Wizard facilitates easy installation of bolt catch roll pins without damaging the receiver, eliminating the need for a starter punch.
It also simplifies the installation of pivot pins, springs, and detents, with extra springs and detents provided in the package.
The product includes 1 Roll Pin Wizard Guide Tool and 1 specially designed roll pin punch to assist in the installation process.
BROWNELLS #3 Roll Pin Punch is essential for safely removing and reusing roll or spring pins in guns without damage.
Constructed from solid steel with long, parallel-ground points and a knurled grip for better handling.
The kit includes seven different sizes, with the #3 punch size being 3/32" (2.4mm).
The Brownells Roll Pin Starter Punch Kit helps start the removal of roll or spring pins without damaging the pins or the punch.
It features a short shaft design for better control and to prevent bending of longer finishing roll pin punches.
The kit includes seven different sizes of punches, all made from solid steel with parallel-ground shanks and knurled handles.
The Grace USA brass punch set includes 8 flathead punches for driving pins and fitting parts without damaging the surface.
Made from premium brass hex stock, the set features a range of sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" diameter punches.
Designed for tasks such as drifting sights and driving pins, ensuring precision in jobs where avoiding scratches and marks is crucial.
The ROLL PIN TOOL securely holds the gas tube roll pin for easy and fast installation, eliminating the need for needle nose pliers or tweezers.
It features a tapered tip for precise control and correct placement of the pin, ensuring a safe and partial installation before finalizing with a roll pin punch.
Constructed from all-steel with a matte black oxide finish, the tool is durable and designed specifically for use with a .078 in size roll pin.
The Real Avid Accu-Punch Hammer and Roll Pin Punch Set is designed for safe removal and installation of roll pins, featuring an ergonomic hammer and easy grip hex-handle punches.
This set includes punches in sizes ranging from 1/16" to 1/4" and is made from durable materials such as rubber, brass, steel, and nylon.
It comes with a proprietary pin alignment tool for easy handling of small pins and is organized in a modern stand-up case for convenience.