Glowing Tritium Lamps Maximize Sight Visibility In Low Light
Genuine, Trijicon, green Tritium lamps feature polished quartz lenses for improved sight recognition in low light, plus appear as white dots for enhanced sight acquisition in bright sunlight as well. Sight bodies are EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered to retain the extra-tight tolerances. Features precise click-adjustments for consistent changes in windage and elevation. Fine line serrations on rear blade surface cuts light reflection to enhance sight pick up.
SPECS: 4140 steel, blue, matte finish. .076” (1.9mm) diameter Tritium lamps. BM #1 retrofits pistols modified to accept the Bo-Mar BMCS rear sight. LPA fits Springfield Armory, Para-Ordnance, and Charles Daly 1911 Autos using the LPA TRT dovetail. Elliason fits Colt Gold Cup, Officer’s Model Match, Ace, and others originally fitted with either Accro or Elliason sights.
More...
Customer ratings for KENSIGHT MFG BM #1
Number of ratings: 4
From brownells.com: 4
Average rating: 4.3
Gold Cup(31/05/2013)
This sight dropped into my Gold Cup series 70 and improved its usefulness as defensive weapon at home. Together with a new tritium front sight the improved sight picture allows rapid acquistion of IDPA targets at matches. The quality appears as good as the original Elliasion sight.
Kensight LPA Cut(14/09/2011)
This is a well built and tough rear sight but only got 3 stars because they stated it would fit the Para Ordnance LPA cut slides. It will not as Para Ordnance does not use a true LPA cut as it is a little over 0.300 short and the dovetail is undersized so much that it too must be recut to true LPA specs. 5 stars for the sight but 3 stars on advertising.
Great sight(04/02/2014)
This sight was installed on a Springfield Range Officer. A simple push old one off, and press this one on. An exact fit. A big improvement over the factory all black one. Works with factory front sight height. Highly recommended.
Very Good Sight....(22/06/2010)
I've installed quite a few Bo-Mar Sights. Personally, I've never really cared for the sharp edges on the Bo-Mar, therefore I've always asked the customer if they wanted me to round the edges on the Bo-Mar Sight blade. I decided to try one of these sites from Kensight. I couldn't have been more pleased. I replaced a Bo-Mar Sight with this one...Fitting was very easy due to the fact that I had previously milled the slide for the Bo-Mar. I have to say, I truley like this sight MUCH BETTER ! NO sharp edges so that it may be carried as a tactical or self defense pistol.
Product no.: 100002627 KENSIGHT MFG BM #1 Mfr Part: 860093755377860930 Genuine, Trijicon, green Tritium lamps feature polished quartz lenses for improved sight recognition in low light, plus appear as white dots for enhanced sight acquisition in bright sunlight as well. Sight bodies are EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered to retain the extra-tight tolerances. Features precise click-adjustments for consistent changes in windage and elevation. Fine line serrations on rear blade surface cuts light reflection to enhance sight pick up.
Product no.: 100002628 KENSIGHT MFG LPA Mfr Part: 860-253755377862538 Genuine, Trijicon, green Tritium lamps feature polished quartz lenses for improved sight recognition in low light, plus appear as white dots for enhanced sight acquisition in bright sunlight as well. Sight bodies are EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered to retain the extra-tight tolerances. Features precise click-adjustments for consistent changes in windage and elevation. Fine line serrations on rear blade surface cuts light reflection to enhance sight pick up.
Glowing Tritium Lamps Maximize Sight Visibility In Low Light
Genuine, Trijicon, green Tritium lamps feature polished quartz lenses for improved sight recognition in low light, plus appear as white dots for enhanced sight acquisition in bright sunlight as well. Sight bodies are EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered to retain the extra-tight tolerances. Features precise click-adjustments for consistent changes in windage and elevation. Fine line serrations on rear blade surface cuts light reflection to enhance sight pick up.
SPECS: 4140 steel, blue, matte finish. .076” (1.9mm) diameter Tritium lamps. BM #1 retrofits pistols modified to accept the Bo-Mar BMCS rear sight. LPA fits Springfield Armory, Para-Ordnance, and Charles Daly 1911 Autos using the LPA TRT dovetail. Elliason fits Colt Gold Cup, Officer’s Model Match, Ace, and others originally fitted with either Accro or Elliason sights.
More...
Customer ratings for KENSIGHT MFG BM #1
Number of ratings: 4
From brownells.com: 4
Average rating: 4.3
Gold Cup(31/05/2013)
This sight dropped into my Gold Cup series 70 and improved its usefulness as defensive weapon at home. Together with a new tritium front sight the improved sight picture allows rapid acquistion of IDPA targets at matches. The quality appears as good as the original Elliasion sight.
Kensight LPA Cut(14/09/2011)
This is a well built and tough rear sight but only got 3 stars because they stated it would fit the Para Ordnance LPA cut slides. It will not as Para Ordnance does not use a true LPA cut as it is a little over 0.300 short and the dovetail is undersized so much that it too must be recut to true LPA specs. 5 stars for the sight but 3 stars on advertising.
Great sight(04/02/2014)
This sight was installed on a Springfield Range Officer. A simple push old one off, and press this one on. An exact fit. A big improvement over the factory all black one. Works with factory front sight height. Highly recommended.
Very Good Sight....(22/06/2010)
I've installed quite a few Bo-Mar Sights. Personally, I've never really cared for the sharp edges on the Bo-Mar, therefore I've always asked the customer if they wanted me to round the edges on the Bo-Mar Sight blade. I decided to try one of these sites from Kensight. I couldn't have been more pleased. I replaced a Bo-Mar Sight with this one...Fitting was very easy due to the fact that I had previously milled the slide for the Bo-Mar. I have to say, I truley like this sight MUCH BETTER ! NO sharp edges so that it may be carried as a tactical or self defense pistol.