These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
More...
Customer ratings for FORSTER PRODUCTS, INC. 26 NOSLER BUSHING BUMP NECK SIZING DIE
Number of ratings: 2
From brownells.com: 2
Average rating: 4
Disappointed (03/04/2017)
Brass was very straight after being fired. Used this die to bump shoulder and resize neck which induced at least 4k runout in the necks.
Homerun product(25/08/2011)
I can't think of a bad thing to report on this product. I got the one that came with 3 bushings. The packaging is nice, and the die fits inside EVEN when setup and assembled, unlike Redding!! It really works as advertised. I always used to hate neck sizing only, because I hate the feeling of closing my bolt - it feels sticky and bindy. With this tooling, you can bump the neck back just a *touch*, and it feels like you're chambering a FLS cartridge, but you've barely worked the brass at all. I am loading 308 on a Dillon 650 with the bump die, a sinclair expander to final size the neck, and Forster micrometer seating die. All dies are floating on O-rings, and my concentricity is rarely over .001". The worst I've seen is .0015".
Product no.: 319000064 FORSTER PRODUCTS, INC. 26 NOSLER BUSHING BUMP NECK SIZING DIE Mfr Part: BBD3411757253991769 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Product no.: 749006329 FORSTER PRODUCTS, INC. 223 WSSM BUSHING BUMP NECK DIE Mfr Part: BBD3171757253998966 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
74.9GBP11£74.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 223 WSSM (Winchester Super Short Mag)Die Style: Full Length Sizing Dies
Forster's Precision Bushing Bump Dies size the case neck and adjust headspace without sizing the case body and include a decapping assembly.
The die is compatible only with Forster bushings, not with Redding or Wilson bushings, and bushings should be .002 inch smaller than the loaded round's case neck.
Bushings are sold separately and are available in .001 inch increments for the 223 WSSM cartridge.
Attributes
Cartridge:
223 WSSM (Winchester Super Short Mag)
Die Style:
Full Length Sizing Dies
Delivery weight: 0.408kgShipping height: 56mmShipping width: 135mmShipping length: 218mm
UPC
: 757253998966
Item details
Made in USA
Product no.: 749006330 FORSTER PRODUCTS, INC. 243 WSSM BUSHING BUMP NECK DIE Mfr Part: BBD3241757253998935 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
74.9GBP11£74.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 243 WSSM (Winchester Super Short Mag)Die Style: Full Length Sizing Dies
Forster's Bushing Bump Neck Sizing Dies polish and size the case neck while adjusting headspace length without sizing the case body.
The die requires Forster-specific bushings, which are not included and must be chosen .002 inch smaller than the loaded round's case neck.
Designed for 243 WSSM cartridges, the die includes a decapping assembly but does not work with Redding or Wilson bushings.
Attributes
Cartridge:
243 WSSM (Winchester Super Short Mag)
Die Style:
Full Length Sizing Dies
Delivery weight: 0.386kgShipping height: 56mmShipping width: 130mmShipping length: 216mm
UPC
: 757253998935
Item details
Made in USA
Product no.: 749006334 FORSTER PRODUCTS, INC. 22-250 REMINGTON BUSHING BUMP NECK DIE Mfr Part: BBD3191757253998959 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the case neck and adjust headspace without sizing the case body and come with a decapping assembly.
The dies are only compatible with Forster bushings, not with Redding or Wilson bushings, and require a bushing about .002 inch smaller than the case neck of a loaded round.
Bushings for the 22-250 Remington cartridge die are sold separately and available in .001 inch increments.
Attributes
Cartridge:
22-250 Remington
Die Style:
Full Length Sizing Dies
Delivery weight: 0.431kgShipping height: 56mmShipping width: 135mmShipping length: 218mm
UPC
: 757253998959
Item details
Made in USA
Product no.: 749006336 FORSTER PRODUCTS, INC. 6MM BR BUSHING BUMP NECK DIE Mfr Part: BBD3301757253998928 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the case neck and adjust headspace length without sizing the case body.
The die requires Forster bushings, which are not compatible with Redding or Wilson bushings, and must be purchased separately.
For bushing size selection, choose one approximately .002 inch smaller than the loaded round's case neck measurement.
Attributes
Cartridge:
6 mm BR
Die Style:
Full Length Sizing Dies
Delivery weight: 0.431kgShipping height: 56mmShipping width: 135mmShipping length: 218mm
UPC
: 757253998928
Item details
Made in USA
Product no.: 749006337 FORSTER PRODUCTS, INC. 300 WSM BUSHING BUMP NECK DIE Mfr Part: BBD3701727253998884 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the neck and adjust headspace without sizing the case body and require Forster bushings.
The die includes a decapping assembly without an expander ball, and bushing size should be .002 inch smaller than the loaded round's neck.
It's specifically for 300 WSM cartridges and is not compatible with Redding or Wilson bushings; bushings must be bought separately in .001 inch increments.
Attributes
Cartridge:
300 WSM (Winchester Short Mag)
Die Style:
Full Length Sizing Dies
Delivery weight: 0.408kgShipping height: 53mmShipping width: 130mmShipping length: 216mm
UPC
: 727253998884
Item details
Made in USA
Product no.: 749006340 FORSTER PRODUCTS, INC. 223 REMINGTON BUSHING BUMP NECK DIE Mfr Part: BBD3141757253998973 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the case neck and adjust headspace without sizing the case body and include a decapping assembly.
The dies are only compatible with Forster bushings, which must be chosen .002 inch smaller than a loaded round's case neck and bought separately.
These dies are specifically for the .223 Remington cartridge and do not work with Redding or Wilson bushings.
Attributes
Cartridge:
223 Remington
Die Style:
Full Length Sizing Dies
Delivery weight: 0.454kgShipping height: 53mmShipping width: 135mmShipping length: 218mm
UPC
: 757253998973
Item details
Made in USA
Product no.: 749006343 FORSTER PRODUCTS, INC. 308 WINCHESTER BUSHING BUMP NECK DIE Mfr Part: BBD3751757253998874 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace without sizing the case body, and include a decapping assembly.
These dies are only compatible with Forster bushings, not with Redding or Wilson bushings, and require a bushing about .002 inch smaller than the case neck of a loaded round.
Bushings are sold separately in increments of .001 inch and must be selected to match the die for proper use.
Attributes
Cartridge:
308 Winchester
Die Style:
Full Length Sizing Dies
Delivery weight: 0.386kgShipping height: 53mmShipping width: 130mmShipping length: 218mm
UPC
: 757253998874
Item details
Made in USA
Product no.: 749012579 FORSTER PRODUCTS, INC. 300 WINCHESTER MAGNUM BUSHING BUMP NECK DIE Mfr Part: BBD3651757253996085 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace without sizing the case body, and include a decapping assembly.
These bushing style dies are only compatible with Forster bushings, not with Redding or Wilson bushings.
When choosing a bushing, select one about .002 inch smaller than the loaded round's case neck, with bushings available in .001 inch increments.
Attributes
Cartridge:
300 Winchester Magnum
Die Style:
Full Length Sizing Dies
Delivery weight: 0.431kgShipping height: 56mmShipping width: 135mmShipping length: 218mm
UPC
: 757253996085
Item details
Made in USA
Product no.: 749017792 FORSTER PRODUCTS, INC. 6.5 CREEDMOOR BUSHING BUMP NECK DIE Mfr Part: BBD3271757253991912 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Product no.: 319000065 FORSTER PRODUCTS, INC. 22 NOSLER BUSHING BUMP NECK SIZING DIE Mfr Part: BBD3111757253991844 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Product no.: 319000066 FORSTER PRODUCTS, INC. 6 CREEDMOOR BUSHING BUMP NECK SIZING DIE Mfr Part: BBD3281757253991608 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Product no.: 319000101 FORSTER PRODUCTS, INC. 6.5 PRC BUSHING BUMP NECK SIZING DIE Mfr Part: BBD3409757253991325 These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
Forster's Precision Bushing Bump Dies size the case neck and adjust headspace without sizing the case body and include a decapping assembly.
The die is only compatible with Forster bushings, not with Redding or Wilson bushings, and requires selecting a bushing .002 inch smaller than the loaded round's neck.
Bushings for the die are sold separately and come in .001 inch increments.
Attributes
Cartridge:
6.5 PRC
Die Style:
Full Length Sizing Dies
Delivery weight: 0.247kgShipping height: 44mmShipping width: 51mmShipping length: 178mm
UPC
: 757253991325
Item details
Made in USA
Achieve precision with Forster's 26 Nosler Bushing Bump Neck Sizing Die. 🛠️ Perfect for adjusting headspace without body sizing. Get yours now!
These had-polished bushing style dies are a little different than traditional neck style bushing dies or full-length style bushing dies. Forster's Precision Bushing Bump Dies size the case neck and adjust the headspace length without sizing the body of the case. Includes a decapping assembly without an expander ball so your bushing selection determines the internal neck diameter. This die is only compatible with Forster bushings - does not work with Redding or Wilson bushings. When selecting a bushing size, choose a bushing approximately .002 inch smaller than a loaded round measures at the case neck. Bushings are available in increments of .001 inch. Bushings must be purchased separately.
More...
Customer ratings for FORSTER PRODUCTS, INC. 26 NOSLER BUSHING BUMP NECK SIZING DIE
Number of ratings: 2
From brownells.com: 2
Average rating: 4
Disappointed (03/04/2017)
Brass was very straight after being fired. Used this die to bump shoulder and resize neck which induced at least 4k runout in the necks.
Homerun product(25/08/2011)
I can't think of a bad thing to report on this product. I got the one that came with 3 bushings. The packaging is nice, and the die fits inside EVEN when setup and assembled, unlike Redding!! It really works as advertised. I always used to hate neck sizing only, because I hate the feeling of closing my bolt - it feels sticky and bindy. With this tooling, you can bump the neck back just a *touch*, and it feels like you're chambering a FLS cartridge, but you've barely worked the brass at all. I am loading 308 on a Dillon 650 with the bump die, a sinclair expander to final size the neck, and Forster micrometer seating die. All dies are floating on O-rings, and my concentricity is rarely over .001". The worst I've seen is .0015".