Pre-Fit Pads That Take The Hurt Out Of Shotgun Shooting
Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
SPECS: NAVCOM synthetic material. Black with black base. Ribbed face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits Ruger 77/22 All Weather, plus Sako 75 and Tikka T-3 Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 835/500 fits post-1999 manufactured guns.
More...
Customer ratings for LIMBSAVER REM. 700/870/1100/12 GA. 11-87, SYNTHETIC
Number of ratings: 15
From brownells.com: 14
Average rating: 4.1
Excellent(30/07/2020)
Put two of these on a pair of 308 Mossberg MVP-LC's that I'm playing with from a benchrest. The CTR stock is exactly what they are designed for. Exchange took about 4 minutes each. Combined with the muzzle brake on the LC it's not hard to spent an entire afternoon enjoying them without having to worry about any degree of felt recoil. Looking for 2 more to put on a pair of 223 LC's for my (notoriously recoil shy) wife.
Not As Advertised(22/04/2010)
This recoil pad did not come close to fitting the Remington 700 synthetic stock that it was advertised to fit. Limbsaver customer service blamed this on Remington's use of "seven or eight different sub-contractors to produce their stocks". It would appear that odds are likely the product will not fit as advertised.
Fit 870 Police Synthetic Stock Perfectly(19/04/2012)
I bought a used 870P synthetic stock and mounted this pad. It works very well and really tames the gun. The fit was perfect. If you lightly lube the screws, they turn in much easier.
Great recoil pad - no more bruises!(28/07/2013)
Picked this up for my 870 Express, and it's fantastic. My shoulder used to get bruised up after a few 3" slugs, but after putting this on I shot a few boxes and didn't feel anything.
Trap is also easier; can shoot all day and not feel it the next morning.
Works(15/10/2011)
Fit on 338 Win Mag Tikka T-3 Lite Stainless is at least as good as the factory. This rifle weighs exactly 7 pounds with scope, sling, ready to hunt (less ammo), so recoil used to be brutal. This will never be a plinking rifle, but felt recoil is very tolerable. Using my "Virtual 33 Win" deer loads (200gr bullet, 2200 fps), it's more pleasant than a 30-30 Win 94.
Works on a Model 10 Wood Stock Also(01/11/2009)
It's listed for the Model 110, but this fit my Model 10 wood stock perfectly as well. Added a bout 1/2" versus the stock model at about the same weight. A LOT softer.
Works with a 111 Wood Stock(28/02/2016)
I bought a Savage 111 30-06 from Cabela's a couple of years ago. I believe that it was a special production that Savage did for them. I absolutely love the rifle, however it kicks like a mule. There really wasn't much for a recoil pad. I saw this on here and gave it a chance. I am glad that I did. It fits just perfect and only took a couple minutes to install.
Excellent product.(11/02/2011)
Most people use the grind to fit limbsaver recoil pads on their Benelli's. I used this one per limbsavers cross reference suggestion.
This was very easy to adapt to the Benelli M1 Tactical Pistol Grip Stock. It is SIGNIFICANTLY softer than the grind to fit models. Even 3" mag rifled slugs are a breeze to double tap on.
300 Win Mag Rem. 700 LSS(28/06/2011)
I replaced the factory Rem. pad on my 300 win mag with the LimbSaver, it fit great and was easy to put on. First time at the range I fired 18 handloads running 3185 adv-fps with 180 gn. Nos partations and the felt recoil was nill still has the push and muzzle jump but recoil is really cut to very mild. It made a really big difference and I would recommend this pad for anyone that needs to soffen the recoil of a hard shooting rifle, it worked on my 300 Win Mag, best thing I have done to that rifle. I always used a lead sled before when shooting the 300 win mag at the range, now that is not necessary, I can use the bi-pod and shoulder the rifle right, the limbsaver made it enjoyable to shoot.
Fits Marlin 444/336 wood stock(24/10/2012)
A near perfect fit believe it or not. External profile was near spot on but holes for wood screws needed a small amount of massaging to fit the 444SS pistol grip stock. A very nice recoil pad however.
Just about a perfect fit!(18/09/2013)
Bought this recoil pad for my Marlin 336 and the fit was so close to perfect I didn't have to do anything except to re-drill the screw holes to make it perfect! As always Brownell's processed and shipped my order super fast. Thanks
Not Easy To Install(04/11/2016)
Simple installation stated on the package, however installation screws's are not supplied. After a conversation with Brownell's customer service; I was informed installation hardware is not available to be ordered as there is none specified in Brownell's catalog. Brownell tech service stated I would have to find the appropriate hardware and then modify the stock holes to accept the hardware and recoil pad. Not an easy installation as advertised and one that I do not want to undertake. As far as I am concerned, the item is un-useable as advertised and shipped. I do not recommend this item.
Great product!!!!(03/10/2011)
I installed this on my Mossy 835 slug gun (24" rifled and ported bbl). I have a medical condition such that my Drs said NO center fire rifles or shotguns :(. With this pad installed felt recoil is around that of my 5.56 rifles. I could not believe the reduction in recoil from a butt pad!!! Installed easily, the holes actually lined up. Highly recommended.
Pre-Fit Means Doesn't Fit - DO NOT BUY!!(08/10/2014)
Spent $75 for two of these for my pair of Mossberg 500s. THEY DO NOT FIT AT ALL..IT IS NOT EVEN CLOSE. Pre-fit is a lie. The instructions show you where to grind off material so it will fit and it doesn't,so now you can't even return it (will try Brownells customer service tomorrow, but am not getting my hopes up). I bought these supposedly pre-fit pads because there are NO gunsmiths within a reasonable range and now am forced to rely on worn out recoil pads and bird season just getting started. I shoot trap and skeet weekly and hunt as often as possible.
Product no.: 902000097 LIMBSAVER REM. 700/870/1100/12 GA. 11-87, SYNTHETIC Mfr Part: 10101697438101012 Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
These recoil pads fit a wide range of rifles, shotguns, and muzzleloaders, significantly reducing felt recoil by up to 70% and incorporating anti-muzzle jump technology.
Easy to install without the need for screws, these pads are designed for quick installation and are suitable for all-weather conditions.
Manufactured by SIMS VIBRATION LABORATORIES, the pads are made from NAVCOM synthetic material, ensuring durability and performance across various firearm models.
Product no.: 902000060 LIMBSAVER REM. 870, WOOD Mfr Part: 10102697438101029 Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
The Limbsaver recoil pad for the Remington 870 is designed to reduce up to 70% of felt recoil and incorporates anti-muzzle jump technology.
This recoil pad is a pre-fit, easy to install accessory made of NAVCOM synthetic material, suitable for all-weather conditions, and does not require screws.
It is compatible with a variety of firearms including certain models from Benelli, Ruger, Browning, Mossberg, Sako, and Tikka.
Product no.: 902000062 LIMBSAVER REM. 700 BDL, WOOD Mfr Part: 10112697438101128 Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
Product no.: 100002236 LIMBSAVER RUGER (RECESSED STOCK)/SAKO 75/TIKKA T-3 LITE, SYNTHETIC Mfr Part: 10011697438100114 Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
Product no.: 100018234 LIMBSAVER MAGPUL MOE, CTR, ACS, L-STR & UBR Mfr Part: 10025697438100251 Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
The recoil pads are designed to fit a wide range of rifles, shotguns, and muzzleloaders, reducing up to 70% of felt recoil and incorporating anti-muzzle jump technology.
These recoil pads are easy to install without the need for screws, and they are made to withstand all-weather conditions.
Compatible with various gun models including Benelli 12 gauge, Ruger 77/22 All Weather, Sako 75, Tikka T-3 Lite, Browning Gold, and Mossberg 835/500 post-1999.
Pre-Fit Pads That Take The Hurt Out Of Shotgun Shooting
Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
SPECS: NAVCOM synthetic material. Black with black base. Ribbed face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits Ruger 77/22 All Weather, plus Sako 75 and Tikka T-3 Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 835/500 fits post-1999 manufactured guns.
More...
Customer ratings for LIMBSAVER REM. 700/870/1100/12 GA. 11-87, SYNTHETIC
Number of ratings: 15
From brownells.com: 14
Average rating: 4.1
Excellent(30/07/2020)
Put two of these on a pair of 308 Mossberg MVP-LC's that I'm playing with from a benchrest. The CTR stock is exactly what they are designed for. Exchange took about 4 minutes each. Combined with the muzzle brake on the LC it's not hard to spent an entire afternoon enjoying them without having to worry about any degree of felt recoil. Looking for 2 more to put on a pair of 223 LC's for my (notoriously recoil shy) wife.
Not As Advertised(22/04/2010)
This recoil pad did not come close to fitting the Remington 700 synthetic stock that it was advertised to fit. Limbsaver customer service blamed this on Remington's use of "seven or eight different sub-contractors to produce their stocks". It would appear that odds are likely the product will not fit as advertised.
Fit 870 Police Synthetic Stock Perfectly(19/04/2012)
I bought a used 870P synthetic stock and mounted this pad. It works very well and really tames the gun. The fit was perfect. If you lightly lube the screws, they turn in much easier.
Great recoil pad - no more bruises!(28/07/2013)
Picked this up for my 870 Express, and it's fantastic. My shoulder used to get bruised up after a few 3" slugs, but after putting this on I shot a few boxes and didn't feel anything.
Trap is also easier; can shoot all day and not feel it the next morning.
Works(15/10/2011)
Fit on 338 Win Mag Tikka T-3 Lite Stainless is at least as good as the factory. This rifle weighs exactly 7 pounds with scope, sling, ready to hunt (less ammo), so recoil used to be brutal. This will never be a plinking rifle, but felt recoil is very tolerable. Using my "Virtual 33 Win" deer loads (200gr bullet, 2200 fps), it's more pleasant than a 30-30 Win 94.
Works on a Model 10 Wood Stock Also(01/11/2009)
It's listed for the Model 110, but this fit my Model 10 wood stock perfectly as well. Added a bout 1/2" versus the stock model at about the same weight. A LOT softer.
Works with a 111 Wood Stock(28/02/2016)
I bought a Savage 111 30-06 from Cabela's a couple of years ago. I believe that it was a special production that Savage did for them. I absolutely love the rifle, however it kicks like a mule. There really wasn't much for a recoil pad. I saw this on here and gave it a chance. I am glad that I did. It fits just perfect and only took a couple minutes to install.
Excellent product.(11/02/2011)
Most people use the grind to fit limbsaver recoil pads on their Benelli's. I used this one per limbsavers cross reference suggestion.
This was very easy to adapt to the Benelli M1 Tactical Pistol Grip Stock. It is SIGNIFICANTLY softer than the grind to fit models. Even 3" mag rifled slugs are a breeze to double tap on.
300 Win Mag Rem. 700 LSS(28/06/2011)
I replaced the factory Rem. pad on my 300 win mag with the LimbSaver, it fit great and was easy to put on. First time at the range I fired 18 handloads running 3185 adv-fps with 180 gn. Nos partations and the felt recoil was nill still has the push and muzzle jump but recoil is really cut to very mild. It made a really big difference and I would recommend this pad for anyone that needs to soffen the recoil of a hard shooting rifle, it worked on my 300 Win Mag, best thing I have done to that rifle. I always used a lead sled before when shooting the 300 win mag at the range, now that is not necessary, I can use the bi-pod and shoulder the rifle right, the limbsaver made it enjoyable to shoot.
Fits Marlin 444/336 wood stock(24/10/2012)
A near perfect fit believe it or not. External profile was near spot on but holes for wood screws needed a small amount of massaging to fit the 444SS pistol grip stock. A very nice recoil pad however.
Just about a perfect fit!(18/09/2013)
Bought this recoil pad for my Marlin 336 and the fit was so close to perfect I didn't have to do anything except to re-drill the screw holes to make it perfect! As always Brownell's processed and shipped my order super fast. Thanks
Not Easy To Install(04/11/2016)
Simple installation stated on the package, however installation screws's are not supplied. After a conversation with Brownell's customer service; I was informed installation hardware is not available to be ordered as there is none specified in Brownell's catalog. Brownell tech service stated I would have to find the appropriate hardware and then modify the stock holes to accept the hardware and recoil pad. Not an easy installation as advertised and one that I do not want to undertake. As far as I am concerned, the item is un-useable as advertised and shipped. I do not recommend this item.
Great product!!!!(03/10/2011)
I installed this on my Mossy 835 slug gun (24" rifled and ported bbl). I have a medical condition such that my Drs said NO center fire rifles or shotguns :(. With this pad installed felt recoil is around that of my 5.56 rifles. I could not believe the reduction in recoil from a butt pad!!! Installed easily, the holes actually lined up. Highly recommended.
Pre-Fit Means Doesn't Fit - DO NOT BUY!!(08/10/2014)
Spent $75 for two of these for my pair of Mossberg 500s. THEY DO NOT FIT AT ALL..IT IS NOT EVEN CLOSE. Pre-fit is a lie. The instructions show you where to grind off material so it will fit and it doesn't,so now you can't even return it (will try Brownells customer service tomorrow, but am not getting my hopes up). I bought these supposedly pre-fit pads because there are NO gunsmiths within a reasonable range and now am forced to rely on worn out recoil pads and bird season just getting started. I shoot trap and skeet weekly and hunt as often as possible.