Machined aluminum mount for installing a Trijicon RMR reflex sight on a 30mm scope tube, allowing for quick shifts between long-range and close-in targeting.
Offers flexibility to position the RMR to the left, right, or at any desired angle for optimal sighting.
Compatible as a ring top half replacement on Precision Reflex 30mm scope rings, constructed from 6061 T6 aluminum with a hardcoat anodized finish for durability.
Constructed from hardened steel for durability, with tempered feed lips to maintain shape and prevent deformation.
Compatible with AR-15/M16 rifles chambered in 6.8mm Remington SPC, .22 Nosler, and .224 Valkyrie, offering a 15-round capacity.
Features a lightweight, Magpul brand nylon composite follower marked for 6.8mm to prevent caliber confusion.
The wrench is compatible with DPMS & KAC .308 caliber rifles for precise barrel nut installation.
Made of 3/8 inch high steel and features 4 lugs on each side to fit DPMS and KAC barrel nuts.
Can be used with any 3/8 or 1/2 inch drive torque wrench and is designed for 24-tooth free float barrel nuts.
Heavy-duty wrench designed for leverage in installing and removing barrel nuts on ArmaLite® AR-10® rifles, compatible with 3/8" or ½" drive tools.
Made from 3/8" thick steel to prevent flexing and ensure even torque distribution during use.
Constructed from 1018 steel with a black oxide finish for durability and corrosion resistance.
The Precision Reflex Gas Buster AR-15 Charging Handle features a gas deflection groove to protect the shooter from gas blowback and debris.
Constructed from strong 7075 T6 aluminum alloy with a steel latch, it ensures durability and reliability under hard use.
Available in three configurations (Flat Latch, Military Big Latch, and Combat Latch) to provide a secure grip and quick operation in stressful situations.
Heavy-duty wrench designed for installing and removing AR-15/M16 barrel nuts, compatible with 3/8" or ½" drive tools.
Made from 3/8" thick steel to prevent flexing and ensure even torque distribution.
Armorer’s model includes a 10" handle and additional holes for gas tube alignment, with both 3/8" and ½" drive cutouts.
Precision Reflex offers three types of AR-15 charging handle latches: Flat Latch, Military Big Latch, and Combat Latch, each designed for secure and quick operation.
The latches are compatible with standard mil-spec charging handles and PRI Gas Buster handles, made from hardened steel for durability.
Each latch features an oversized grasping surface to enhance handling speed and reliability, especially in stressful situations, with the Combat Latch being the largest at 17% bigger than the Military Big Latch.
The PRI Receiver Block is specifically designed to secure Remington 700 long or short action rifles for light machine work.
It can be used with a variety of tools including a drill press, milling machine, or hand-held power tools.
The block serves as a stable platform for attaching scopes or sighting systems and for performing rough sighting.
The Precision Reflex M69-AN-PVS-14 Mount allows for precise alignment of a PVS-14 night vision monocular with a rifle's red dot sight, featuring adjustable elevation and locators to prevent slipping.
It includes an A.R.M.S. quick-release throw lever for easy mounting and dismounting from any standard Picatinny rail and is made from durable 6061 T6 aluminum with a non-reflective black finish.
The mount's robust construction includes aluminum and steel with a hardcoat anodized finish to prevent corrosion, and a steel thumb screw to lock in the elevation setting.
The AR-15/M16 Upper Receiver Vise Block is a heavy-duty, machined aluminum block that allows for secure clamping of an AR-15/M16 upper receiver in a vise without damage.
Its dual-use design accommodates the receiver either top side up or upside down, using two steel T-pins for stability, enabling easy access for optics installation, cleaning, or maintenance.
The block is compatible with AR-15/M16/M4 and clones with .250” diameter takedown pin holes and includes a locking bar with a large thumbscrew for securing flattop receivers upside down.
The MK 12 MOD H GEN III DIY Kit is designed for self-build enthusiasts, providing all necessary components to construct the Mark 12 Mod H.
Included in the kit are the PRI Gen III rifle length Black forearm, Gen III Recce rail, and PRI Rail mounted flip up front and rear sights.
Additional components include the Gas Buster charging handle with military Big Latch, and the AE brake & collar, all manufactured by PRECISION REFLEX, INC.
The base is specifically designed for Remington 700 Long Action with a 25 MOA elevation, providing front objective clearance.
Constructed from T-6 7075 hard coated black anodized aluminum, the base measures 16" in length and includes #8-40 screws for mounting.
It features a full 1913 rail for versatility and has side mounting holes for future addition of side rails.
Precision Reflex's 30mm Steel Rings are designed to withstand heavy recoil and rough handling, suitable for high caliber rifles like the .50.
The rings are constructed from durable 4140 carbon steel with a non-reflective black Parkerized finish and feature four Torx-head screws for secure mounting.
These extra high scope rings are compatible with standard Picatinny bases and are ideal for long-range shooters who prioritize quality and reliability.
PRI Aluminum 30mm Scope Rings are machined from 6061 T6 aluminum with a hardcoat anodized finish for durability and corrosion resistance.
They feature a four-screw ring cap design and a steel crossbolt with a 1/2" nut for secure mounting to standard Picatinny scope bases.
The rings are designed to fit 30mm scope tubes and come in a non-reflective matte black finish, suitable for long-range shooters who prioritize quality and reliability.
The Precision Reflex AR-15 SPR Top Rail Gen II offers a full-length Picatinny rail for mounting a wide range of accessories.
It is designed for secure attachment to rifle-length PRI forearms, ensuring stability and no shift during use.
Constructed from machined 6061 T6 aluminum with a matte black anodized finish, it adds .450" elevation and features numbered slots for precise accessory placement.
The AR-15 Adjustable Low-Profile Gas Block by Precision Reflex, Inc. allows for tuning of gas flow to ensure reliable extraction and ejection.
It features an adjustable screw that modifies the gas port directly without the need to drill the gas tube.
Designed to fit under free float tubes, this steel gas block is low-profile and does not obstruct the sight picture of scopes or red-dot sights.
The Gen III Delta forearm features a comfortable triangular cross-section and a flat bottom, suitable for shooting from rests.
Constructed from carbon fiber, it is lightweight yet strong, and offers compatibility with most gas piston systems.
Includes an 8½" top rail, three 3½" side and bottom rails, and all necessary installation components.