Precision Reflex’s replacement AR-15 charging handle latches have oversized grasping surfaces to help you operate the handle faster and more reliably, especially when you’re under stress. They fit standard mil-spec charging handles as well as PRI Gas Buster handles and are machined from hardened steel to stand up to hard use. Precision Reflex replacement AR-15 Charging Handle Latches come in three configurations: Flat Latch most resembles the latch on the standard mil-spec handle, but has a deeply hooked contour that gives you an extra-secure, non-slip hold Military Big Latch is oversized with a straight front edge that is easy to locate, grasp, and operate; edges are rounded to protect your fingers Combat Latch has a similar contour to Military Big Latch but is 17% larger, with serrations on the front edge to assist in quick and comfortable operation All PRI replacement AR-15 charging handle latches will help you get your finger in the right place and cycle the handle FAST on the first attempt, without fumbling and false tries. Roll pin included.
SPECS: Aluminum, hardcoat anodized, matte black.
More...
Customer ratings for PRECISION REFLEX COMBAT LATCH FOR CHARGING HANDLES
Number of ratings: 2
From brownells.com: 2
Average rating: 4
Highly recommended!(05/10/2009)
I am the armorer for a small agency which utilizes these latches. Good stuff! An effective solution for the modern tactical carbine!
Perfect match for the DPMS steel latch(28/12/2012)
The PRI military big latch meet my personal preference among the many oversize latches available for the AR. Compared to other style and brands (which I also have) this one I like best simply because it remains rigid and does not wiggle or make side to side movement when pulled. The reason why other big latches tends to have a downward play when activated is because of the pattern of the lach itself with an upward hump. The PRI's latch rear portion locks in solidly with the charging handle when operated and the stop pin takes the pressure not the pivot pin which is the most fragile part of the assembly. PRI would have earned my 5-star if they mated this part to a matching steel handle like the ones made by DPMS. The only thing I wanted to add as an extra touch for this latch is a fine serration. That would have completed the package. Note: A stopper (solid or roll pin) will be required to be installed to the DPMS steel charging handle to limit the rearward travel of the latch, with just enough movement for the latch hook to clear the upper receiver's locking shoulder.
Product no.: 714000031 PRECISION REFLEX COMBAT LATCH FOR CHARGING HANDLES Mfr Part: 05-0042090222551336 Precision Reflex’s replacement AR-15 charging handle latches have oversized grasping surfaces to help you operate the handle faster and more reliably, especially when you’re under stress. They fit standard mil-spec charging handles as well as PRI Gas Buster handles and are machined from hardened steel to stand up to hard use. Precision Reflex replacement AR-15 Charging Handle Latches come in three configurations: Flat Latch most resembles the latch on the standard mil-spec handle, but has a deeply hooked contour that gives you an extra-secure, non-slip hold Military Big Latch is oversized with a straight front edge that is easy to locate, grasp, and operate; edges are rounded to protect your fingers Combat Latch has a similar contour to Military Big Latch but is 17% larger, with serrations on the front edge to assist in quick and comfortable operation All PRI replacement AR-15 charging handle latches will help you get your finger in the right place and cycle the handle FAST on the first attempt, without fumbling and false tries. Roll pin included.
Precision Reflex offers three types of AR-15 charging handle latches: Flat Latch, Military Big Latch, and Combat Latch, each designed for secure and quick operation.
The latches are compatible with standard mil-spec charging handles and PRI Gas Buster handles, made from hardened steel for durability.
Each latch features an oversized grasping surface to enhance handling speed and reliability, especially in stressful situations, with the Combat Latch being the largest at 17% bigger than the Military Big Latch.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 556000005 PRECISION REFLEX MILITARY LATCH, ONLY Mfr Part: 05-0041090222551329 Precision Reflex’s replacement AR-15 charging handle latches have oversized grasping surfaces to help you operate the handle faster and more reliably, especially when you’re under stress. They fit standard mil-spec charging handles as well as PRI Gas Buster handles and are machined from hardened steel to stand up to hard use. Precision Reflex replacement AR-15 Charging Handle Latches come in three configurations: Flat Latch most resembles the latch on the standard mil-spec handle, but has a deeply hooked contour that gives you an extra-secure, non-slip hold Military Big Latch is oversized with a straight front edge that is easy to locate, grasp, and operate; edges are rounded to protect your fingers Combat Latch has a similar contour to Military Big Latch but is 17% larger, with serrations on the front edge to assist in quick and comfortable operation All PRI replacement AR-15 charging handle latches will help you get your finger in the right place and cycle the handle FAST on the first attempt, without fumbling and false tries. Roll pin included.
Precision Reflex’s replacement AR-15 charging handle latches have oversized grasping surfaces to help you operate the handle faster and more reliably, especially when you’re under stress. They fit standard mil-spec charging handles as well as PRI Gas Buster handles and are machined from hardened steel to stand up to hard use. Precision Reflex replacement AR-15 Charging Handle Latches come in three configurations: Flat Latch most resembles the latch on the standard mil-spec handle, but has a deeply hooked contour that gives you an extra-secure, non-slip hold Military Big Latch is oversized with a straight front edge that is easy to locate, grasp, and operate; edges are rounded to protect your fingers Combat Latch has a similar contour to Military Big Latch but is 17% larger, with serrations on the front edge to assist in quick and comfortable operation All PRI replacement AR-15 charging handle latches will help you get your finger in the right place and cycle the handle FAST on the first attempt, without fumbling and false tries. Roll pin included.
SPECS: Aluminum, hardcoat anodized, matte black.
More...
Customer ratings for PRECISION REFLEX COMBAT LATCH FOR CHARGING HANDLES
Number of ratings: 2
From brownells.com: 2
Average rating: 4
Highly recommended!(05/10/2009)
I am the armorer for a small agency which utilizes these latches. Good stuff! An effective solution for the modern tactical carbine!
Perfect match for the DPMS steel latch(28/12/2012)
The PRI military big latch meet my personal preference among the many oversize latches available for the AR. Compared to other style and brands (which I also have) this one I like best simply because it remains rigid and does not wiggle or make side to side movement when pulled. The reason why other big latches tends to have a downward play when activated is because of the pattern of the lach itself with an upward hump. The PRI's latch rear portion locks in solidly with the charging handle when operated and the stop pin takes the pressure not the pivot pin which is the most fragile part of the assembly. PRI would have earned my 5-star if they mated this part to a matching steel handle like the ones made by DPMS. The only thing I wanted to add as an extra touch for this latch is a fine serration. That would have completed the package. Note: A stopper (solid or roll pin) will be required to be installed to the DPMS steel charging handle to limit the rearward travel of the latch, with just enough movement for the latch hook to clear the upper receiver's locking shoulder.