The Browning Buckmark steel magazine is designed for .22 LR cartridges and has a 10-round capacity.
It features a heat-treated carbon steel body with a black-oxide finish for durability and corrosion resistance.
The magazine includes a heat-treated chrome-silicon wire spring and an injection-molded follower for reliable feeding.
The EGW Browning T-Bolt Picatinny Scope Mount is ambidextrous and features a full-length Picatinny rail for flexible accessory mounting.
It's made from durable aluminum, Type II anodized, and is designed for 0 MOA elevation, suitable for shooting up to 500 yards.
All components, including mounting screws and wrench, are made in the USA, with installation requiring 20 inch lbs of torque and blue loctite.
EGW's Browning A-Bolt Short Action Scope Base is a one-piece Picatinny rail that requires no drilling or tapping for installation.
The scope base is precision machined from 6061 T6 aluminum and includes Torx® screws and wrench for mounting with recommended 20 inch lbs of torque and blue loctite.
It is designed to fit factory scope mount holes and accepts both Picatinny and Weaver scope rings, offering flexibility in scope choice and eye relief adjustments.
The Tandemkross Game Changer Pro Compensator is designed to redirect muzzle gases and mitigate recoil, enhancing control over 5.56 NATO AR-15s and .22 LR competition pistols.
Its two-port design vents gases at 45-degree angles, maintaining a clear sight picture by avoiding upward gas venting that can blur vision.
The compensator supports various rounds but is optimized for .22 LR firearms, and the all-steel construction adds weight to the front end to help offset muzzle rise.
The Tandemkross Eagle's Talon Extractor is designed to replace the factory extractor of the Browning Buck Mark for improved reliability.
It features a CNC-machined, hardened tool steel construction with a sharp hook design for secure and sure casing extraction.
It aims to reduce common malfunctions such as failures-to-eject and stove-pipe issues during the pistol's cycling process.
The TANDEMKROSS "HALO" Charging Ring provides a better grip for charging the Browning Buckmark, especially beneficial for competition shooters, juniors, and those with limited hand strength.
It features a unique ring pull design and is made from lightweight aircraft grade aluminum, ensuring durability and ease of use.
Compatibility is specific to Browning Buck Mark models produced in 2014 and later, ensuring a precise fit for these variants.
EGW's Browning BLR Scope Bases offer easy installation with no drilling or tapping, fitting directly into the factory mount holes.
The bases are precision machined from 6061 T6 aluminum, featuring Picatinny slot-and-rail spacing for flexible scope mounting and eye relief adjustments.
They come with all necessary mounting hardware, including Torx® screws and a wrench, and recommend using 20 inch lbs of torque and blue loctite.
The set includes four Magna-Tip bits precisely matched for the Browning Auto-5 gun screws, ensuring the best fit.
Features a magnetic socket and an 84 Hollow Handle for convenient on-board storage of the bits.
The screwdriver set is designed for portability, measuring 8" long overall with a 1¼" diameter grip.
The COMP SIGHT by Hiviz features a light-gathering polymer rod for visibility in various lighting conditions and includes eight interchangeable light pipes.
It has a steel base designed to securely mount on shotguns, replacing the front bead, and is compatible with a wide range of models from Mossberg to Remington.
The sight comes with four different diameter options, mounting screws for various shotgun ribs, and a rotary carrying case for the light pipes and key.
The BROWNING BUCK MARK PISTOL PICATINNY SCOPE MOUNT is a lightweight, aluminum rail designed to replace the factory rib/rear sight, allowing for optic mounting without losing backup iron sights.
It features eight cross-slots for optimal optic positioning and an integral open rear sight that is adjustable for windage and elevation.
The mount is made from 6061 T6 aluminum with a hardcoat anodized finish, measuring approximately 5 inches long and is compatible with the Browning Buck Mark Pistol model using the original screws.
The EGW Browning A-Bolt Long Action Scope Base is a one-piece Picatinny rail that allows for easy adjustments to eye relief and scope choice without the need for drilling or tapping.
This scope base is precision machined from 6061 T6 aluminum, ensuring high rigidity and is equipped with MIL-STD 1913 spec cross-slots for secure mounting of Picatinny or Weaver rings.
It comes complete with the necessary socket head Torx® screws and wrench for installation and recommends using 20 inch lbs of torque and a drip of blue loctite.
The DEWEY Adjustable Rod Guides protect the rifle chamber during cleaning by replacing the bolt and sealing out bore solvent with a rubber O-ring.
It features an aluminum rod guide collar and a threaded brass adjustment pin for quick adaptation to any action length, compatible with most centerfire bolt action rifles.
The 10" Rod Guide is designed for hand clearance with short to medium scopes, while the 13" Rod Guide accommodates long varmint and target scopes, both requiring a cleaning rod longer than the barrel.
The TANDEMKROSS "Victory" trigger for the Browning Buck Mark features a flat-faced, skeletonized design for improved control and leverage.
It offers a textured surface for a non-slip grip and adjustable pre-travel and over-travel for a customized trigger pull.
The trigger's wide face and lightweight design contribute to a perceived lower pull weight and enhanced shooting precision.
The AIMTECH Browning Auto-5 12GA Scope Mount is a lightweight, balanced support system for scopes, designed to withstand slug recoil.
Installation is quick and easy, requiring only the replacement of the trigger group pins with the included bolts.
Constructed from black anodized aluminum, the mount is approximately 6 inches long and 2.5 inches high, and it is compatible with Weaver-style rings (not included).
The SIGNATURE GRIPS by Pachmayr for the Browning Hi-Power feature a unique wrap-around design with front strap checkering for enhanced grip.
These grips are made from durable, molded neoprene rubber with over 22 square inches of sharp diamond checkering to ensure non-slip handling in any conditions.
No modifications to the firearm are needed for installation, and the grips are suitable for both right and left-handed shooters.
EGW Browning BBR Long Action Scope Bases allow for easy scope mounting without drilling or tapping, fitting directly into factory mount holes.
The bases are precision machined from 6061 T6 aluminum, featuring Picatinny slot-and-rail spacing for flexible scope positioning and compatibility with Picatinny or Weaver rings.
Lightweight with a milled center channel for weight reduction, the bases meet MIL-STD 1913 specifications and come with Torx® screws and wrench for installation using 20 inch lbs of torque and blue loctite.
EGW Browning X-Bolt Long Action Scope Bases allow for easy installation with no drilling or tapping, fitting directly into the factory mount holes.
Constructed from 7075 T6 aluminum, the bases offer flexibility in scope choice and eye relief, compatible with both Picatinny and Weaver rings.
The Heavy Duty version is designed to be .100" lower to reduce weight and improve accuracy by aligning the optic closer to the barrel centerline.