Outstanding Quality Reamers By Dave Manson Help You Produce Accurate Chambers
Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
SPECS: M7 High speed steel, in-the-white. Solid pilot, six, straight flutes, right-hand cut. Rimfire reamers have 1⁄4" (6.3mm) diameter round shank. Centerfire reamers have 3⁄8" (9.5mm) square drive shank. .50 BMG has a 1⁄2" round shank. Pistol reamers available with barrel pilot diameter for semi-auto and single shot pistols. .38 Super Nonte headspaces on case mouth.
More...
Customer ratings for MANSON PRECISION RIMLESS PISTOL CARTRIDGE, .45 ACP FINISHER
Number of ratings: 3
From brownells.com: 3
Average rating: 5
Works flawlessly(17/06/2014)
I bought this to fix the chamber on an old WWII-era pistol. I could not be more satisfied. It worked great and left a perfect result.
I've never used a chamber reamer before, but using this was easy.
Only downside I can think of is that if you try to use this reamer to cut chambers in a blank, you might need another reamer to do the throat of the chamber, as some ammunition won't fit otherwise. But that is not the intended use of this reamer as far as I know.
Super sharp, super fast(03/02/2014)
I used this too convert my 45acp barrel to 460 Rowland. The tool is so sharp that I was able to easily lengthen the stainless steel chamber with no T-handle or vise, just my two hands!
A "Must Have" For 1911 Tinkerers(09/11/2014)
I bought a used pistol that somebody had MOSTLY fitted a Bar-Sto barrel to, but then gave up because the chamber was undersize. An hour of careful work with the Manson Finishing Reamer and I was good to go. Work slowly, the tool sets the headspace, so you need to check your progress often.
Product no.: 513051451 MANSON PRECISION RIMLESS PISTOL CARTRIDGE, .45 ACP FINISHER Mfr Part: F45ACPB Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Manufactured by respected firearms reamer specialist Dave Manson, these finish chambering reamers are designed to create precise and accurate chambers in .45 ACP firearms.
The reamers are made from M7 high-speed steel with a solid pilot and six straight flutes, ensuring a clean and consistent cut.
They are built to SAAMI specifications and include features such as integral throat and fixed pilots, with options for customizing throating for non-standard bullets or additional freebore length.
Product no.: 513051385 MANSON PRECISION RIMLESS PISTOL CARTRIDGE, .357 SIG FINISHER Mfr Part: F357SIG Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Manson Precision rimless pistol cartridges are engineered by Dave Manson with superb quality, designed to SAAMI specifications, and ground from M7 steel for precise chambering and accuracy.
The finish chambering reamers feature an integral throater and solid, fixed pilots, while throating reamers allow for customization of chambering jobs for non-standard bullets or additional freebore length.
These reamers are available in various specifications, including solid pilot, six straight flutes, right-hand cut, and different shank sizes to cater to a range of firearms, including semi-auto and single-shot pistols.
Product no.: 513051400 MANSON PRECISION RIMLESS PISTOL CARTRIDGE, .40 S&W FINISHER Mfr Part: F40SWB Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Dave Manson engineered the RIMLESS PISTOL CARTRIDGES with superb quality, made to SAAMI specifications from M7 steel for precise chambering and accuracy.
Finish Chambering Reamers feature an integral throater and solid, fixed pilots, while Throating Reamers allow for customization of chambering jobs.
The reamers are designed for .40 S&W rimless pistol cartridges and are available with barrel pilot diameters suitable for semi-auto and single shot pistols.
Product no.: 513051901 MANSON PRECISION RIMLESS PISTOL CARTRIDGE, 9MM LUGER FINISHER Mfr Part: F9MMLUGB Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Product no.: 513051923 MANSON PRECISION RIMLESS PISTOL CARTRIDGE, 9 X 23MM FINISHER Mfr Part: F923 Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
Outstanding Quality Reamers By Dave Manson Help You Produce Accurate Chambers
Engineered and ground by one of the most respected names in firearms reamers, Dave Manson. Superb quality reamers made to SAAMI specifications, ground from M7 steel to cut precise chambers capable of outstanding accuracy. Finish Chambering Reamers feature integral throater and solid, fixed pilots. Throating Reamers let you customize a chambering job for non-standard bullets or additional freebore length. Available as finish reamers unless listed otherwise.
SPECS: M7 High speed steel, in-the-white. Solid pilot, six, straight flutes, right-hand cut. Rimfire reamers have 1⁄4" (6.3mm) diameter round shank. Centerfire reamers have 3⁄8" (9.5mm) square drive shank. .50 BMG has a 1⁄2" round shank. Pistol reamers available with barrel pilot diameter for semi-auto and single shot pistols. .38 Super Nonte headspaces on case mouth.
More...
Customer ratings for MANSON PRECISION RIMLESS PISTOL CARTRIDGE, .45 ACP FINISHER
Number of ratings: 3
From brownells.com: 3
Average rating: 5
Works flawlessly(17/06/2014)
I bought this to fix the chamber on an old WWII-era pistol. I could not be more satisfied. It worked great and left a perfect result.
I've never used a chamber reamer before, but using this was easy.
Only downside I can think of is that if you try to use this reamer to cut chambers in a blank, you might need another reamer to do the throat of the chamber, as some ammunition won't fit otherwise. But that is not the intended use of this reamer as far as I know.
Super sharp, super fast(03/02/2014)
I used this too convert my 45acp barrel to 460 Rowland. The tool is so sharp that I was able to easily lengthen the stainless steel chamber with no T-handle or vise, just my two hands!
A "Must Have" For 1911 Tinkerers(09/11/2014)
I bought a used pistol that somebody had MOSTLY fitted a Bar-Sto barrel to, but then gave up because the chamber was undersize. An hour of careful work with the Manson Finishing Reamer and I was good to go. Work slowly, the tool sets the headspace, so you need to check your progress often.