Help and contact
(0) Basket
Newsletter
SPIRITUS SYSTEMS
LV-119 REAR COVERT PLATE BAG
104.9
124.9
27
GBP
Product no.: 430101650
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM ARID
Mfr Part: PC-RC-MA-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM ARID
Mfr Part: PC-RC-MA-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Arid
Product no.: 430101682
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - BLACK
Mfr Part: PC-RC-BK-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - BLACK
Mfr Part: PC-RC-BK-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Black
Product no.: 430101686
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM ARID
Mfr Part: PC-RC-MA-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM ARID
Mfr Part: PC-RC-MA-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Arid
Product no.: 430101687
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM BLACK
Mfr Part: PC-RC-MB-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM BLACK
Mfr Part: PC-RC-MB-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Black
Product no.: 430101689
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM
Mfr Part: PC-RC-MC-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM
Mfr Part: PC-RC-MC-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam
Product no.: 430101656
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM TROPIC
Mfr Part: PC-RC-MT-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM TROPIC
Mfr Part: PC-RC-MT-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Tropic
Product no.: 430101691
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM TROPIC
Mfr Part: PC-RC-MT-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - MULTICAM TROPIC
Mfr Part: PC-RC-MT-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Tropic
Product no.: 430101693
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - RANGER GREEN
Mfr Part: PC-RC-RG-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - RANGER GREEN
Mfr Part: PC-RC-RG-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Ranger Green
Product no.: 430101660
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - WOODLAND
Mfr Part: PC-RC-WD-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - WOODLAND
Mfr Part: PC-RC-WD-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Woodland
Product no.: 430101652
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM BLACK
Mfr Part: PC-RC-MB-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM BLACK
Mfr Part: PC-RC-MB-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Black
Product no.: 430101669
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM BLACK
Mfr Part: PC-RC-MB-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM BLACK
Mfr Part: PC-RC-MB-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Black
Product no.: 430101963
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - BLACK
Mfr Part: PC-RC-BK-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - BLACK
Mfr Part: PC-RC-BK-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Black
Product no.: 430101663
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - BLACK
Mfr Part: PC-RC-BK-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - BLACK
Mfr Part: PC-RC-BK-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Black
Product no.: 430101647
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - COYOTE BROWN
Mfr Part: PC-RC-CB-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - COYOTE BROWN
Mfr Part: PC-RC-CB-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Coyote Brown
Product no.: 430101665
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - COYOTE BROWN
Mfr Part: PC-RC-CB-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - COYOTE BROWN
Mfr Part: PC-RC-CB-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Coyote Brown
Product no.: 430101684
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - COYOTE BROWN
Mfr Part: PC-RC-CB-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - COYOTE BROWN
Mfr Part: PC-RC-CB-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Coyote Brown
Product no.: 430101667
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM ARID
Mfr Part: PC-RC-MA-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM ARID
Mfr Part: PC-RC-MA-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Arid
Product no.: 430101654
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM
Mfr Part: PC-RC-MC-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - MULTICAM
Mfr Part: PC-RC-MC-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam
Product no.: 430101672
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM
Mfr Part: PC-RC-MC-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM
Mfr Part: PC-RC-MC-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam
Product no.: 430101674
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM TROPIC
Mfr Part: PC-RC-MT-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - MULTICAM TROPIC
Mfr Part: PC-RC-MT-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Multi-Cam Tropic
Product no.: 430101658
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - RANGER GREEN
Mfr Part: PC-RC-RG-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - RANGER GREEN
Mfr Part: PC-RC-RG-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Ranger Green
Product no.: 430101676
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - RANGER GREEN
Mfr Part: PC-RC-RG-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - RANGER GREEN
Mfr Part: PC-RC-RG-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Ranger Green
Product no.: 430101678
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - WOODLAND
Mfr Part: PC-RC-WD-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - WOODLAND
Mfr Part: PC-RC-WD-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Woodland
Product no.: 430101696
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - WOODLAND
Mfr Part: PC-RC-WD-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - WOODLAND
Mfr Part: PC-RC-WD-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Woodland
Product no.: 430101662
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - WOLF GREY
Mfr Part: PC-RC-WG-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (LARGE) - WOLF GREY
Mfr Part: PC-RC-WG-LG LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Wolf Grey
Product no.: 430101680
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - WOLF GREY
Mfr Part: PC-RC-WG-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (MEDIUM) - WOLF GREY
Mfr Part: PC-RC-WG-MD LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Wolf Grey
Product no.: 430101698
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - WOLF GREY
Mfr Part: PC-RC-WG-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
SPIRITUS SYSTEMS LV-119 REAR COVERT PLATE BAG (X-LARGE) - WOLF GREY
Mfr Part: PC-RC-WG-XL LV/119 Rear Covert Plate Bag The Spiritus Systems LV/119 Rear COVERT Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing. The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series. Plate Fitment The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates do not fall within the measurements listed. Medium-10" x 12.5" Large- 10.25" x 13.25" Extra Large- 11" x 14.00" Thickness- MAXIMUM of 1.20" NOTE: This is a component of a Spiritus Systems LV/119 Plate Carrier build. To build a COMPLETE plate carrier you will need to select AT LEAST ONE of each of these items: Spiritus Systems Front Plate Bag Spiritus Systems Rear Plate Bag Spiritus Systems Shoulder Covers Spiritus Systems Cummerbund Set Note: This product may be shown with optional accessories. Made in the USA
Specs:
Color: Wolf Grey
Discover the LV-119 Rear Covert Plate Bag by Spiritus Systems. Perfect for low-profile operations with a sleek design. 🛡️ Made in the USA!
Reordered
£114.90
£94.90 - £114.90
Reordered
£34.90
£34.90 - £43.90
Classical view
Mobile view