Speed release eliminates awkward fumbling for the hard-to-operate, recessed, factory release button. Push the large lever down with your trigger finger to easily release the magazine. Lets you keep your eye on the target while quickly changing out your 10/22®’s magazine. Easy, no-gunsmithing installation, with no permanent modifications to your rifle.
SPECS: Aluminum, hardcoat anodized, black. Approximately 2-7⁄8" OAL, 7⁄8" (2.1cm) max. width. ½ oz. (14g) weight.
More...
Customer ratings for NORDIC COMPONENTS SPEED MAGAZINE RELEASE
Number of ratings: 4
From brownells.com: 4
Average rating: 4.5
works great once you get it installed(05/09/2011)
would give this a 5 except the hole for the mag release retaining pin was seriously undersized. Spent a while attempting to install with no success, finally just took the mag release out and tried a test fit with the stock ruger retaining pin. That quickly showed me where the problem was :) I was lucky I had a #30 drill bit around and was able drill out the mag release. Once I did that, everything went together without a hitch. Have put about 1,000 rounds through the rifle since installing it and no problems, works great.
Highly recomend it(02/03/2012)
Fit in no problem at all, less than 3 minutes to install, works some slick
Better than expected(24/04/2013)
This thing slid right in and was a perfect fit. Nice looking and very easy to use. A huge improvement over the stock release.
The best part? My mags now drop free.
Solid and Tight(25/05/2018)
I recently installed this on my RIA 10/22. I had to drill out the hole in the mag release as it was just a hair undersized. It took all of 30 seconds to do and now I have a very tight and solid mag release. Highly recommended.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your Ruger 10/22 with the Nordic Components Speed Magazine Release for fast and efficient reloading! ⚡ Lightweight aluminum design.
Speed release eliminates awkward fumbling for the hard-to-operate, recessed, factory release button. Push the large lever down with your trigger finger to easily release the magazine. Lets you keep your eye on the target while quickly changing out your 10/22®’s magazine. Easy, no-gunsmithing installation, with no permanent modifications to your rifle.
SPECS: Aluminum, hardcoat anodized, black. Approximately 2-7⁄8" OAL, 7⁄8" (2.1cm) max. width. ½ oz. (14g) weight.
More...
Customer ratings for NORDIC COMPONENTS SPEED MAGAZINE RELEASE
Number of ratings: 4
From brownells.com: 4
Average rating: 4.5
works great once you get it installed(05/09/2011)
would give this a 5 except the hole for the mag release retaining pin was seriously undersized. Spent a while attempting to install with no success, finally just took the mag release out and tried a test fit with the stock ruger retaining pin. That quickly showed me where the problem was :) I was lucky I had a #30 drill bit around and was able drill out the mag release. Once I did that, everything went together without a hitch. Have put about 1,000 rounds through the rifle since installing it and no problems, works great.
Highly recomend it(02/03/2012)
Fit in no problem at all, less than 3 minutes to install, works some slick
Better than expected(24/04/2013)
This thing slid right in and was a perfect fit. Nice looking and very easy to use. A huge improvement over the stock release.
The best part? My mags now drop free.
Solid and Tight(25/05/2018)
I recently installed this on my RIA 10/22. I had to drill out the hole in the mag release as it was just a hair undersized. It took all of 30 seconds to do and now I have a very tight and solid mag release. Highly recommended.