Your basket is empty.

Basket

Help and contact

Free standard delivery over £199

100-day return policy

Newsletter

Sale

Over 300,000 customers - we say thank you!

4.93/5 "Very good" (1400+ reviews)

40,000+ products for hunting and shooting sports

HARRISON DESIGN & CONSULTING
1911 EXTREME SERVICE MAGAZINE CATCH

100004998

Description
Ratings (9)

Rugged, Reliable, Hardened Steel For Extreme Tactical Duty

Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.

SPECS: Carbon steel, blued, or stainless steel (SS), natural finish.

More...

Customer ratings for HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, BLUED

Number of ratings: 9
From brownells.com: 9
Average rating: 4.3

GREAT FIT AND FUNCTION!!! (27/02/2011)

I tried two different Ed Brown extended tactical releases and neither one fit for functioned well. They also did not have a stop machined into it to keep the release from being pushed too far and jamming the mag.I was disappointed in the Ed Brown Product!!! BUT, I was impressed with the fit of this
one! I put it in...the only thing I did was clean up the casting/machining marks. It was smooth and didn't over-extend as stated. Great Part!

SS mag catch (17/06/2011)

Drop in fit to my Springfield TRP. Works 100%, with factory and WC 47d mags. Another great product form harrison!

Will buy again. (26/12/2011)

Part went into gun with minor fitting which I would rather have than falling in. Minimal clearance. Looks good in gun.

Didn't have a good experience (24/02/2012)

I bought this extended mag release button based on the 5 star reviews it got. I tried to install it in a Colt Series 80 government model and though it fit the frame fine I could not get the holding screw to turn enough to release when installing. When compared to the original Colt release, which works perfectly, it appears there's no clearance notch to allow the tab to pivot in the frame.

Perfect Fit (06/07/2016)

Like the title says, fit perfectly, works properly and took all of two minutes to install in my old Kimber Custom.

Dropped in, works perfectly (27/11/2017)

I used the Harrison stainless magazine catch to replace the blued MIM catch that came with my Ruger SR1911 CMD. Part dropped right in, works perfectly and looks great on my stainless 1911. Note you will need to order the catch lock and spring also unless you will be reusing your existing parts. Very pleased with this product.

True drop in (18/07/2018)

Used this to replace a competition style mag catch release on my Colt Officer's ACP. The process takes about a minute, maybe two. Zero fitting required, it was a complete drop in fit. The finish of the stainless was an adequate match to my stainless Officer's ACP. I wish all work was this easy. Testing afterward: it works, that's all I can ask for!

The best 1911 mag catch (24/12/2011)

This is the best mag catch you can get for a 1911. It fit my Kimber perfect with no fitting. It has a built in stop so you cannot push the button in too far as to hit the magazine such as with the Brown ext mag catch.

"Drop in" is always hit or miss (20/07/2013)

Three stars due to "tolerance stacking."

I installed this in an STI Spartan 9mm. The mag catch would not seat fully into the frame.

After trying it in several other 1911s and finding it fit fine in them, I used a 5/16 end mill, spinning it by hand in reverse, to clean up any burrs that may have been in the Armscor frame.

Then I found it trapped the magazine while reloading, on all of the 1911s I installed it in. The Armscor mag catch lock may be too short, I didn't compare it to others. I relieved the inside of the mag catch with a sanding drum on my dremel.

Overall, I'm not unhappy with it and it appears to be a high quality part. But I always assume 1911 parts will need some fitting.

Read 9 more ratings on brownells.com

44.9 49.9 2 GBP

Sale

Product no.: 100004998
HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, BLUED
Mfr Part: HD-202-B Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.

37.43 GBP 0 £37.43 * £49.90

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Finish: Blued Hand: Right Make: 1911 Model: Government, Commander, Officers

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Heavy duty tactical magazine catch designed for secure retention and quick release under extreme conditions.
Serrated button is 1⁄16" taller than standard for better grip and first-attempt magazine drops.
Available in blued carbon steel or stainless steel, compatible with 1911 models: Government, Commander, Officers.

Attributes

Finish: Blued Hand: Right Make: 1911 Model: Commander,Government,Officers Delivery weight: 0.009kg Shipping height: 1mm Shipping width: 83mm Shipping length: 152mm

Item details

Made in USA
US export classification: 0A501.x

Sale

Product no.: 100004997
HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS
Mfr Part: HD-202-S Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.

33.67 GBP 0 £33.67 * £44.90