Silicon Carbide Abrasive Balls For Flawless "Inside" Polishing On Revolvers & Semi-Auto Pistols
Mainspring housing hone expertly polishes the inside of a Government or Commander mainspring housing leaving a smooth burr free surface.. The smooth surface finish is essential for that professional trigger job. Hones are available in a medium 400 grit or a fine 800 grit.
SPECS: Med. and Fine grit silicon carbide abrasive, twisted steel shafts. Must be used with Flex-Hone oil. 1911 Slide Lug Area Hone: 8" (20.3cm) long
More...
Customer ratings for BROWNELLS FINE 1911 MAINSPRING HOUSING HONE
Number of ratings: 1
From brownells.com: 1
Average rating: 5
Feels like an expensive action job(18/09/2015)
I used both the medium and fine versions with the prescribed FlexHone oil. Chucked in a padded vise at a convenient working angle under a light, I used a quick,rythmic in and out motion to achieve a somewhat crosshatch pattern that becomes shiny with the fine stones.
The purpose of the motion is to avoid "grooving" the spring bore and I would allow the hone to "dwell" at the bottom of the strokes every few seconds to avoid tapering of the bore.
Using a long tailed mainspring cap with a tapered end (like factory Colt parts) will act as a better guide rod and contribute to a smooth feeling cocking stroke that makes your pistol feel like a finely tuned custom!
Silicon Carbide Abrasive Balls For Flawless "Inside" Polishing On Revolvers & Semi-Auto Pistols
Mainspring housing hone expertly polishes the inside of a Government or Commander mainspring housing leaving a smooth burr free surface.. The smooth surface finish is essential for that professional trigger job. Hones are available in a medium 400 grit or a fine 800 grit.
SPECS: Med. and Fine grit silicon carbide abrasive, twisted steel shafts. Must be used with Flex-Hone oil. 1911 Slide Lug Area Hone: 8" (20.3cm) long
More...
Customer ratings for BROWNELLS FINE 1911 MAINSPRING HOUSING HONE
Number of ratings: 1
From brownells.com: 1
Average rating: 5
Feels like an expensive action job(18/09/2015)
I used both the medium and fine versions with the prescribed FlexHone oil. Chucked in a padded vise at a convenient working angle under a light, I used a quick,rythmic in and out motion to achieve a somewhat crosshatch pattern that becomes shiny with the fine stones.
The purpose of the motion is to avoid "grooving" the spring bore and I would allow the hone to "dwell" at the bottom of the strokes every few seconds to avoid tapering of the bore.
Using a long tailed mainspring cap with a tapered end (like factory Colt parts) will act as a better guide rod and contribute to a smooth feeling cocking stroke that makes your pistol feel like a finely tuned custom!