Upgrade your AR-15 rifle with this MOE-SL furniture set by Magpul. The MOE SL Stock – Mil-Spec Model is a drop-in replacement buttstock for AR-15/M4 carbines using mil-spec or commercial sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad is optimized for use with body armor or modular gear and provides for efficient shoulder transitions. The MOE SL Hand Guard for AR-15/M4 firearms with carbine-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Similar to the MOE-K2, the MOE SL Grip (Magpul Original Equipment Slim Line) is a drop-in upgrade for AR-15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body. With an aggressive new texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible.
More...
Customer ratings for MAGPUL MOE SL FURNITURE SET M-LOK CARBINE FOR AR-15 ODG
Number of ratings: 3
From brownells.com: 3
Average rating: 4.3
Good Kit(10/06/2015)
I ordered this setup for my SBR and I am happy with the choice. The stock fits on a BCM receiver extension with no play and the hand guard mounted very solidly to a standard Delta-ring setup. The handguard is very tight so an installation tool should be used. I somewhat liked the grip, but I like the MIAD more so I swapped for the MIAD. Of course this is a personal preference and has nothing to do with the quality of the SL grip. I mounted Magpul M-LOK accessories to the handguard and they are rock solid. This is a great setup.
Handguard: I've had this on my carbine for a couple years now. The best thing I can say about it is it gives my carbine a cool two-tone look that gets compliments at the range. Unfortunately it hasn't been the best for practical reasons.
First, the plastic is too weak for M-Lok fittings. I ended up permanently damaging one of the slots installing a weaponlight just trying to get it tight enough not to wobble.
Second, it's too short on the bottom relative the the amount of space available for mounting. General rule for shooting, if you're going to do supported shooting you can't rest it on the barrel, it has to be on the handguard. So if I try to do this through a VTAC barricade, the light (mounted left side for thumb activation) strikes the port and prevents movement. So to make this work you have to back the light up and use a pressure switch, but there's no M-LOK/Pic on top to mount it on. So now you need to use the 2-way tape.
None of this makes this a bad product--it's an upgrade over milspec furniture and it's reasonably priced. It'll work fine for most home defense or sporting applications. But if you're going to be getting into drills on the VTAC or more serious tactical use, I'd suggest getting something higher-end.
Fits Smith & Wesson Sports 2(31/10/2017)
believe it or not...i installed these within 30 minutes... requires a few tools but nothing to hard. if you need help search it on youtube. The hardest part was the hard guard which I did not have a tool for. I am very satisfied.
Product no.: 100015969 MAGPUL MOE SL FURNITURE SET M-LOK CARBINE FOR AR-15 ODG Upgrade your AR-15 rifle with this MOE-SL furniture set by Magpul. The MOE SL Stock – Mil-Spec Model is a drop-in replacement buttstock for AR-15/M4 carbines using mil-spec or commercial sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad is optimized for use with body armor or modular gear and provides for efficient shoulder transitions. The MOE SL Hand Guard for AR-15/M4 firearms with carbine-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Similar to the MOE-K2, the MOE SL Grip (Magpul Original Equipment Slim Line) is a drop-in upgrade for AR-15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body. With an aggressive new texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible.
154.9GBP30£154.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Magpul MOE SL Furniture Set is designed for AR-15/M4 carbines and includes a stock, handguard, and grip with a sleek design optimized for use with body armor.
This set features M-LOK accessory slots for modular flexibility and is made from durable polymer in O.D. Green color.
The MOE SL Grip offers a more vertical angle and improved ergonomics for better control, and it's compatible with mil-spec and commercial receiver extensions.
Made in USA
US export classification: 0A501.y.1
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 100015968 MAGPUL MOE SL FURNITURE SET M-LOK CARBINE FOR AR-15 FDE Upgrade your AR-15 rifle with this MOE-SL furniture set by Magpul. The MOE SL Stock – Mil-Spec Model is a drop-in replacement buttstock for AR-15/M4 carbines using mil-spec or commercial sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad is optimized for use with body armor or modular gear and provides for efficient shoulder transitions. The MOE SL Hand Guard for AR-15/M4 firearms with carbine-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Similar to the MOE-K2, the MOE SL Grip (Magpul Original Equipment Slim Line) is a drop-in upgrade for AR-15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body. With an aggressive new texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible.
154.9GBP23£154.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Color: Flat Dark EarthHandguard: CarbineMake: AR-15Material: PolymerStyle: M-LOKType: Mil-Spec
Product no.: 100015970 MAGPUL MOE SL FURNITURE SET M-LOK CARBINE FOR AR-15 GRAY Upgrade your AR-15 rifle with this MOE-SL furniture set by Magpul. The MOE SL Stock – Mil-Spec Model is a drop-in replacement buttstock for AR-15/M4 carbines using mil-spec or commercial sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad is optimized for use with body armor or modular gear and provides for efficient shoulder transitions. The MOE SL Hand Guard for AR-15/M4 firearms with carbine-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Similar to the MOE-K2, the MOE SL Grip (Magpul Original Equipment Slim Line) is a drop-in upgrade for AR-15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body. With an aggressive new texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible.
154.9GBP25£154.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Product no.: 100015967 MAGPUL MOE SL FURNITURE SET M-LOK CARBINE FOR AR-15 BLACK Upgrade your AR-15 rifle with this MOE-SL furniture set by Magpul. The MOE SL Stock – Mil-Spec Model is a drop-in replacement buttstock for AR-15/M4 carbines using mil-spec or commercial sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad is optimized for use with body armor or modular gear and provides for efficient shoulder transitions. The MOE SL Hand Guard for AR-15/M4 firearms with carbine-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Similar to the MOE-K2, the MOE SL Grip (Magpul Original Equipment Slim Line) is a drop-in upgrade for AR-15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body. With an aggressive new texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible.
Upgrade your AR-15 rifle with this MOE-SL furniture set by Magpul. The MOE SL Stock – Mil-Spec Model is a drop-in replacement buttstock for AR-15/M4 carbines using mil-spec or commercial sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad is optimized for use with body armor or modular gear and provides for efficient shoulder transitions. The MOE SL Hand Guard for AR-15/M4 firearms with carbine-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Similar to the MOE-K2, the MOE SL Grip (Magpul Original Equipment Slim Line) is a drop-in upgrade for AR-15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body. With an aggressive new texture for positive weapon control along with excellent ergonomics, the SL Grip provides a slightly smaller size and slimline feel. All mounting hardware included. Must be used with the triangular A2 front sight assembly; other gas blocks are not compatible.
More...
Customer ratings for MAGPUL MOE SL FURNITURE SET M-LOK CARBINE FOR AR-15 ODG
Number of ratings: 3
From brownells.com: 3
Average rating: 4.3
Good Kit(10/06/2015)
I ordered this setup for my SBR and I am happy with the choice. The stock fits on a BCM receiver extension with no play and the hand guard mounted very solidly to a standard Delta-ring setup. The handguard is very tight so an installation tool should be used. I somewhat liked the grip, but I like the MIAD more so I swapped for the MIAD. Of course this is a personal preference and has nothing to do with the quality of the SL grip. I mounted Magpul M-LOK accessories to the handguard and they are rock solid. This is a great setup.
Handguard: I've had this on my carbine for a couple years now. The best thing I can say about it is it gives my carbine a cool two-tone look that gets compliments at the range. Unfortunately it hasn't been the best for practical reasons.
First, the plastic is too weak for M-Lok fittings. I ended up permanently damaging one of the slots installing a weaponlight just trying to get it tight enough not to wobble.
Second, it's too short on the bottom relative the the amount of space available for mounting. General rule for shooting, if you're going to do supported shooting you can't rest it on the barrel, it has to be on the handguard. So if I try to do this through a VTAC barricade, the light (mounted left side for thumb activation) strikes the port and prevents movement. So to make this work you have to back the light up and use a pressure switch, but there's no M-LOK/Pic on top to mount it on. So now you need to use the 2-way tape.
None of this makes this a bad product--it's an upgrade over milspec furniture and it's reasonably priced. It'll work fine for most home defense or sporting applications. But if you're going to be getting into drills on the VTAC or more serious tactical use, I'd suggest getting something higher-end.
Fits Smith & Wesson Sports 2(31/10/2017)
believe it or not...i installed these within 30 minutes... requires a few tools but nothing to hard. if you need help search it on youtube. The hardest part was the hard guard which I did not have a tool for. I am very satisfied.