Help and contact
(0) Basket
Newsletter
Home
Rifle Parts
Bolt Parts
Charging Handle Parts
Charging Handles
BREEK ARMS AR-15 WAHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE
Support
BREEK ARMS
AR-15 WAHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE
59.9
59.9
4
GBP
Product no.: 430106995
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE BLK
Mfr Part: BRK555 812296030872 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE BLK
Mfr Part: BRK555 812296030872 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
Specs:
Finish: Black
Hand: Ambidextrous
Make: AR-15
Style: Short
Top takeaways
- The Breek Arms WARHAMMER MICRO MOD2 is an ambidextrous charging handle made of 7075-T6 aluminum, designed for easy use with gloves and to avoid snagging when shooting with gear.
- It features a low profile design with a width of 2.40" and includes enhancements to reduce gas blowback, making it especially beneficial when shooting suppressed.
- This American-made charging handle is compatible with all mil-spec AR15/M16 rifles, requires no gunsmith for installation, and is lightweight at just under 1 ounce.
Attributes
Finish: Black Hand: Ambidextrous Make: AR-15 Style: Short Delivery weight: 0.041kg Shipping height: 19mm Shipping width: 95mm Shipping length: 222mm UPC : 812296030872
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
Product no.: 430106996
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE FDE
Mfr Part: BRK555-FDE 812296030889 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE FDE
Mfr Part: BRK555-FDE 812296030889 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
Specs:
Finish: Flat Dark Earth
Hand: Ambidextrous
Make: AR-15
Style: Short
Product no.: 430106997
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE GRAY
Mfr Part: BRK555-MGRAY 812296030896 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE GRAY
Mfr Part: BRK555-MGRAY 812296030896 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
Specs:
Finish: Gray
Hand: Ambidextrous
Make: AR-15
Style: Short
Product no.: 430106998
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE ODG
Mfr Part: BRK555-RGREEN 812296030902 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE ODG
Mfr Part: BRK555-RGREEN 812296030902 The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
Specs:
Finish: O.D. Green
Hand: Ambidextrous
Make: AR-15
Style: Short
Upgrade your AR-15 with the Breek Arms WARHAMMER MICRO MOD2 ambidextrous charging handle. 🛠️ Enjoy enhanced functionality and durability!
Classical view
Mobile view