My Account (Sign in)

Your basket is empty.

0

Basket

Help and contact

Free standard delivery over £199

100-day return policy

Newsletter

Sale

Over 300,000 customers - we say thank you!

4.93/5 "Very good" (1400+ reviews)

40,000+ products for hunting and shooting sports

BROWNELLS
BRASS LAPS

050806010062 080499032

Description
Ratings (1)

For those who want to put on the final touch of perfection. 5°, 11° and 18° brass laps are used with very fine abrasive, which penetrates the brass and works as a final polish to the chamfer cuts.

More...

Customer ratings for BROWNELLS 32 CALIBER CHAMFERING KIT 11° BRASS LAP

Number of ratings: 1
From brownells.com: 1
Average rating: 5

Used for my Ruger 10/22T recrown (31/07/2010)

The factory crown was rough and eccentric on my 10/22T, so I cut my barrel, polished the new muzzle on a disk sander perfectly smooth and flat, threaded this lap onto my brass cleaning rods (bought at W**Mart), then taped the rod with enough teflon plumber's tape every 4" to barely fit into the barrel (the tape squishes flat as it goes into the bore, so put plenty on), loaded the lap with a little cerium oxide abrasive (used to pitch lap telescope mirrors) mixed with Lucas Red #2 wheel grease (to form a paste) and then attached my cordless drill to the end of the brass rod sticking out of the barrel's breech end. Go slow, check progress often. You want to "just" polish down to the point where the muzzle's lands "almost" touch the grooves. Then use a bit of 1000 grit rouge (also called crocus) cloth wrapped around the tool instead of the abrasive paste to make a 1 or 2 thousands deep "ring" which is barely visible at your muzzle to finish the transition from the barrel lands to groove depth which, if done with care, will give you a better crown than anything money can buy. Go slow, think and shoot straight. The teflon tape around your cleaning rod should keep your bore safe. Be sure not to contaminate the bore with abrasive by only using a paste -- never powdered abrasives by themselves. This process requires hours of work to do it best, but a fine crown is critical to best accuracy if you're a paper puncher. Finish by giving your bore a Brownell's JB Borepaste treatment using first a cleaning brush loaded up for 20 strokes or so, then a cleaning patch with more JB on a tight fitting jag, clean thoughly, oil the bore, patch dry and shoot em up more like the big dollar guns.

Read 1 more ratings on brownells.com

13.9 29.9 8 GBP

Product no.: 080499032
BROWNELLS 32 CALIBER CHAMFERING KIT 11° BRASS LAP 050806010062 11\ .32 Caliber

14.9 GBP 1 £14.90 *

Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

Specs: Make: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Description

11\ .32 Caliber

Attributes

Make: Universal Handguns Delivery weight: 0.009kg Shipping width: 83mm Shipping length: 146mm UPC : 050806010062

Item details

Made in USA

Product no.: 080490381
BROWNELLS 11 BRASS LAP FOR .38-.45 CALIBER 050806009769 11\ .38-.45 Caliber

29.9 GBP 4 £29.90 *

Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse

Specs: Make: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Product no.: 080490385
BROWNELLS 5 BRASS LAP FOR .38/.357 CALIBER 050806009776 For those who want to put on the final touch of perfection. 5°, 11° and 18° brass laps are used with very fine abrasive, which penetrates the brass and works as a final polish to the chamfer cuts.

19.9 GBP 4 £19.90 *

Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse

Specs: Caliber: 38/357 Caliber (.357-.359) Degree: 5 Degrees

Add to shopping list

Ask question

Details

Add to shopping list

Product no.: 080490388
BROWNELLS 18 BRASS LAP FOR .38 CALIBER 050806009783 For those who want to put on the final touch of perfection. 5°, 11° and 18° brass laps are used with very fine abrasive, which penetrates the brass and works as a final polish to the chamfer cuts.

24.9 GBP 1 £24.90 *

Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

Specs: Make: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Product no.: 080490455
BROWNELLS 5 BRASS LAP FOR .44-.45 CALIBER 050806009790 5\ .44-.45 Caliber

15.9 GBP 1 £15.90 *

Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

Specs: Caliber: 44 Caliber (.429-.430), 45 Caliber (.451-.454) Degree: 5 Degrees

Add to shopping list

Ask question

Details

Add to shopping list

Product no.: 080499033
BROWNELLS 32 CALIBER CHAMFERING KIT 18° BRASS LAP 050806010079 18\ .32 Caliber

13.9 GBP 1 £13.90 *

Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

Specs: Make: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Product no.: 080499220
BROWNELLS 22 CALIBER CHAMFERING KIT 11° BRASS LAP 050806010093 11\ .22 Caliber

19.9 GBP 1 £19.90 *

Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

Specs: Make: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Product no.: 080490458
BROWNELLS 18 BRASS LAP FOR .45 CALIBER 050806009806 18\ .45 Caliber

25.9 GBP 0 £25.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Make: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Enhance your precision with the Brownells 32 Caliber Chamfering Kit. Perfect for Universal Handguns! 🔧 Get yours today!

Description
Ratings (1)

For those who want to put on the final touch of perfection. 5°, 11° and 18° brass laps are used with very fine abrasive, which penetrates the brass and works as a final polish to the chamfer cuts.

More...

Customer ratings for BROWNELLS 32 CALIBER CHAMFERING KIT 11° BRASS LAP

Number of ratings: 1
From brownells.com: 1
Average rating: 5

Used for my Ruger 10/22T recrown (31/07/2010)

The factory crown was rough and eccentric on my 10/22T, so I cut my barrel, polished the new muzzle on a disk sander perfectly smooth and flat, threaded this lap onto my brass cleaning rods (bought at W**Mart), then taped the rod with enough teflon plumber's tape every 4" to barely fit into the barrel (the tape squishes flat as it goes into the bore, so put plenty on), loaded the lap with a little cerium oxide abrasive (used to pitch lap telescope mirrors) mixed with Lucas Red #2 wheel grease (to form a paste) and then attached my cordless drill to the end of the brass rod sticking out of the barrel's breech end. Go slow, check progress often. You want to "just" polish down to the point where the muzzle's lands "almost" touch the grooves. Then use a bit of 1000 grit rouge (also called crocus) cloth wrapped around the tool instead of the abrasive paste to make a 1 or 2 thousands deep "ring" which is barely visible at your muzzle to finish the transition from the barrel lands to groove depth which, if done with care, will give you a better crown than anything money can buy. Go slow, think and shoot straight. The teflon tape around your cleaning rod should keep your bore safe. Be sure not to contaminate the bore with abrasive by only using a paste -- never powdered abrasives by themselves. This process requires hours of work to do it best, but a fine crown is critical to best accuracy if you're a paper puncher. Finish by giving your bore a Brownell's JB Borepaste treatment using first a cleaning brush loaded up for 20 strokes or so, then a cleaning patch with more JB on a tight fitting jag, clean thoughly, oil the bore, patch dry and shoot em up more like the big dollar guns.

Read 1 more ratings on brownells.com

Customers also bought

Enhance your chamfering precision with Brownells Chamfer Tool Pilot for .38-40 caliber. 🛠️ Perfect for universal handguns!

BROWNELLS

BROWNELLS CHAMFER TOOL PILOT FOR .38-40 CALIBER
CHAMFER TOOL PILOTS

Chamfering Tools

In stock

£15.90 £15.90 - £19.90

Achieve a polished finish with the Brownells Fine Polishing Hone for .45 ACP cylinders. 🛠️ Perfect for Universal Handguns!

BROWNELLS

BROWNELLS FINE POLISHING HONE FITS .45 ACP CYLINDER
CYLINDER POLISHING SYSTEM

Hones & Files

In stock

£43.90 £36.90 - £44.90

Discover the BROWNELLS 90° Chamfer Cutter, size .560" 🛠️, perfect for Smith & Wesson L Frame. Enhance your chamfering precision today!

BROWNELLS

BROWNELLS 90 CHAMFER CUTTER SIZE .560"
90° CHAMFER CUTTER

Chamfering Tools

In stock

£59.90 £59.90 - £74.90

Enhance your chamfering with the Brownells .38-.45 Chamfering Kit Center Guide. Perfect for Universal Handguns! 🔧 Get yours now!

BROWNELLS

BROWNELLS 38-45 CHAMFERING KIT CENTER GUIDE
.38-.45 CHAMFERING KIT PARTS

Chamfering Tools

In stock

£14.90 £14.90 - £38.90

Discover Starline 9MM Luger Brass! Perfect for top shooters, quality-crafted and packaged in 100 count bags. 🏆 Elevate your shooting experience!

STARLINE

STARLINE 9MM LUGER BRASS 100/BAG
9MM LUGER BRASS

Pistol Brass

Reordered

£27.90

Site Navigation

Product Categories

Ordering

Customer Service

Connect

Secure payment methods

Trade Associations

C.I.P.

Welcome!

to Brownells UK, your destination for anything gun related. With our roots in a genuine passion for firearms, we bring you an unmatched selection of Gun Parts, Firearm Accessories, Gunsmithing Tools, Scopes & Red Dot Sights and Expert Knowledge.

Whether you're looking to maintain, repair, or upgrade, we've got what you need!

For Shooters, By Shooters
We share your enthusiasm and know exactly what you're looking for because we're part of the community.

Massive Selection
From the essentials to the unique, find everything under one roof.

Our blend of tradition and innovation
Shop with the convenience of modern technology, backed by a legacy of experience.

Browse our collection and discover why we're the trusted name in shooting sports & hunting.

*

Prices inclusive of duty & VAT.

© 2024 Brownells UK
Part of the Brownells Europe Group

Back to top