Attributes
- Diameter (in): 0.459
- Delivery weight: 0.293kg
- Shipping height: 86mm
- Shipping width: 86mm
- Shipping length: 142mm
- UPC : 734307916725
Product no.: 430108496
Mfr Part: 91672
734307916725 Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately. Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.Out of stock. No ETA.
Out of stock. No ETA.
45 sizer 20/12/2013
I inherited a few thousand 45 bullets, lead, various weights, designs and mfgs, and most would not fit. Rather than melt them down and start over, I bought one of these in .452. Still haven't shot all, but after sizing, I've had no trouble in revolver or auto. Fine accuracy from 200 gr through 230.