Stainless steel connector reduces the length of trigger pull, improves reset, and eliminates accuracy-robbing overtravel. 5.0 Tactical reduce trigger-pull weight to 5 pounds respectively; both have an extra tab that contacts the trigger bar and prevents overtravel after the striker falls. Each connector requires minor fitting.
SPECS: Stainless steel, polished finish. Will fit all models except Glock models 42 or 43.
More...
Customer ratings for GHOST 5.0 TACTICAL TRIGGER CONNECTOR
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
Not a drop-in part, but it's great!(12/11/2009)
Make sure to get the orange slide cover plate from GLOCK or GHOST to help install. You will need to grind down some of this connector, slowly, constantly checking fit and function. If you assemble the firearm and the fit isn't correct, the gun won't dry-fire and you will have difficulty getting the firearm disassembled. The orange slide cover plate will help you get the fit right without much hassle. If you do use the standard plate, just lock the slide back, take the cover plate off and remove the striker pin assembly. The slide will then be easy to remove.
Very well made part. Has an extra arm not seen in the 5.0 tactical picture, but is more like the one in the 3.5 photo. The part also has holes in the body of the connector that is supposedly able to help keep the connector clean.
Tools needed: rotary tool with a grinding/sanding wheel and also a polishing tip, a vise is helpful though you may also use the trigger mechanism housing to hold the part during fitting.
Eliminates over travel and makes for a nice reset and trigger pull.
Repeat Customer(21/01/2011)
Product pictured isn't what you get. Looks like the 3.5 connector and requires fitting. I had a company rep fit and install the connector on my RTF 22 and 27. Cleans up trigger pull, eliminates ovetravel and helps with quick reset.
Ticked Off at this GARBAGE(10/11/2017)
I did not read the description closely and was surprised that I had to fit the trigger stop--my stupidity. I did-assembled-filed-reassembled about 10 times and it never was able to release the striker. What a piece of garbage. Under CONS I checked Limited Function--only because there was no category for No Functionality Whatsoever!
The trigger stop was not the issue as best as I can tell. Not sure what is
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your Glock with the 5.0 Tactical Trigger Connector! ⚙️ Fits all models except 42 & 43 for a smoother trigger pull.
Stainless steel connector reduces the length of trigger pull, improves reset, and eliminates accuracy-robbing overtravel. 5.0 Tactical reduce trigger-pull weight to 5 pounds respectively; both have an extra tab that contacts the trigger bar and prevents overtravel after the striker falls. Each connector requires minor fitting.
SPECS: Stainless steel, polished finish. Will fit all models except Glock models 42 or 43.
More...
Customer ratings for GHOST 5.0 TACTICAL TRIGGER CONNECTOR
Number of ratings: 3
From brownells.com: 3
Average rating: 3.7
Not a drop-in part, but it's great!(12/11/2009)
Make sure to get the orange slide cover plate from GLOCK or GHOST to help install. You will need to grind down some of this connector, slowly, constantly checking fit and function. If you assemble the firearm and the fit isn't correct, the gun won't dry-fire and you will have difficulty getting the firearm disassembled. The orange slide cover plate will help you get the fit right without much hassle. If you do use the standard plate, just lock the slide back, take the cover plate off and remove the striker pin assembly. The slide will then be easy to remove.
Very well made part. Has an extra arm not seen in the 5.0 tactical picture, but is more like the one in the 3.5 photo. The part also has holes in the body of the connector that is supposedly able to help keep the connector clean.
Tools needed: rotary tool with a grinding/sanding wheel and also a polishing tip, a vise is helpful though you may also use the trigger mechanism housing to hold the part during fitting.
Eliminates over travel and makes for a nice reset and trigger pull.
Repeat Customer(21/01/2011)
Product pictured isn't what you get. Looks like the 3.5 connector and requires fitting. I had a company rep fit and install the connector on my RTF 22 and 27. Cleans up trigger pull, eliminates ovetravel and helps with quick reset.
Ticked Off at this GARBAGE(10/11/2017)
I did not read the description closely and was surprised that I had to fit the trigger stop--my stupidity. I did-assembled-filed-reassembled about 10 times and it never was able to release the striker. What a piece of garbage. Under CONS I checked Limited Function--only because there was no category for No Functionality Whatsoever!
The trigger stop was not the issue as best as I can tell. Not sure what is