Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

Solve soldering issues with the Brownells Ramp Soldering Jig! 🔧 It offers precise pressure for perfect results every time.

BROWNELLS RAMP SOLDERING JIG - BROWNELLS RAMP SOLDERING JIG

050806104372 080739000

Top takeaways

  1. The RAMP SOLDERING JIG solves the issue of ramps moving during soldering by applying constant, spring-loaded pressure.
  2. It features adjustments for height, angle, and spring pressure, with a non-marring "V" block base to center the barrel.
  3. Designed for versatility, it accommodates .45 sights and rear sight bases, and provides ample space for torch use.

Attributes

  • Delivery weight: 0.159kg
  • Shipping height: 58mm
  • Shipping width: 61mm
  • Shipping length: 173mm
  • UPC: 050806104372

Item details

Made in USA
139.9 139.9 1 GBP
139.9 GBP 0 £139.90

Prices inclusive of duty & VAT.

Product no.: 080739000

050806104372 Cures the "ramp slips just as the solder melts" problem with a pointed, spring-loaded plunger that keeps constant pressure on the ramp or a .45 sight, even when the solder flows. Adjusts for height, angle and amount of spring pressure. Non-marring, "V" block base centers barrel under the plunger. Holds rear sight bases in place, too. Great torch clearance.
Backorderable

Backorderable, delivery time approx. 4-12 weeks from the USA warehouse.

1
2
3
4
5
6
7
8
9
10+

Backorderable, delivery time approx. 4-12 weeks from the USA warehouse.

Description:

Spring Pressure Keeps Front Or Rear Ramps/Bases In Place- Perfect On .45 Sights Too; Versatile, Totally Adjustable Design; Excellent Torch Clearance
Cures the "ramp slips just as the solder melts" problem with a pointed, spring-loaded plunger that keeps constant pressure on the ramp or a .45 sight, even when the solder flows. Adjusts for height, angle and amount of spring pressure. Non-marring, "V" block base centers barrel under the plunger. Holds rear sight bases in place, too. Great torch clearance.

Top takeaways

  1. The RAMP SOLDERING JIG solves the issue of ramps moving during soldering by applying constant, spring-loaded pressure.
  2. It features adjustments for height, angle, and spring pressure, with a non-marring "V" block base to center the barrel.
  3. Designed for versatility, it accommodates .45 sights and rear sight bases, and provides ample space for torch use.

Attributes

  • Delivery weight: 0.159kg
  • Shipping height: 58mm
  • Shipping width: 61mm
  • Shipping length: 173mm
  • UPC: 050806104372

Item details

Made in USA

Customers reviews

Customer ratings (2)

3.5 / 5
Slightly recommend

Brownells USA Defective 31/07/2015

I purchased one of these jigs several years ago but did not try it out until recently. The spring-loaded plunger was not perpendicular to the base, so it sat at a slight angle of 5-10 degrees. This prevented full downward pressure onto the workpiece and tended to cause slippage. The plunger has a pointed tip which provides for a less secure hold than a flat tip. I suppose a small flat could be ground on it. To prevent sight rotation during soldering, the base needs to be sitting on a flat surface. Since temperatures are around 1000 degrees, a metal table is the only suitable work surface. The barrel needs to be level and secure as well, so a padded vise is advisable. This requires aligning the vise and metal table so the sight and barrel are level with the jig. It's a clever design, so I am returning the jig for replacement. Hopefully the next one will be more square.

Definitely recommended

Brownells USA Love this Jig 21/05/2011

Used this jig to silver solder Moison nagant front sights back on. Got it on perfect.

Oops! Something went wrong.

We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.

Back to top