Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish.
SPECS: Walnut, straight grain, no figure. Accepts original hardware.Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.
More...
Customer ratings for WOOD PLUS BUTTSTOCK FITS SAVAGE 311
Number of ratings: 3
From brownells.com: 3
Average rating: 2.3
Original Buttplate Too Large(09/07/2015)
The original Savage/Stevens butt plate is too long for this replacement stock and extends over the heel . Nothing was offered to remedy this from Brownell's, except to return. The "finished" model has a smaller aftermarket butt plate, already attached for a bit more $$.
The wood was acceptable except for the cut marks on one side of the butt. Couldn't feather out because there wasn't enough wood to do so with the original butt plate.
Hopefully this stock will be reintroduced with the proper dimensions in the future.
I purchased this stock to finish myself,the classic model 12 lines on the top of the stock is not shaped into the wood.The stock is close to 1/2 inch to short to accept the repo or factory butt plate.The LOP is close to one inch shorter than the factory field stock.The stock is 1/4 inch wider than factory,not a big deal I could shape it on the belt sander.I can take off the wood but not add the wood to the short LOP and butt plate base.[...]I'm in a hunt club and I do competitive card shoots about every weekend and I like to talk guns !
Great Stock at a Good Price(05/04/2012)
I purchased one of these buttstocks for my Savage Model 720. The stock is listed to fit a Remington Model 11, It should also be listed to fit the Savage Model 720, as it fit very well and only needed a final fit, and finishing.The wood is listed as straight grain with no figure, however the one I recieved has enough straight grain to be very eye pleasing. I wood definately buy this stock again.
Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish.
SPECS: Walnut, straight grain, no figure. Accepts original hardware.Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.
More...
Customer ratings for WOOD PLUS BUTTSTOCK FITS SAVAGE 311
Number of ratings: 3
From brownells.com: 3
Average rating: 2.3
Original Buttplate Too Large(09/07/2015)
The original Savage/Stevens butt plate is too long for this replacement stock and extends over the heel . Nothing was offered to remedy this from Brownell's, except to return. The "finished" model has a smaller aftermarket butt plate, already attached for a bit more $$.
The wood was acceptable except for the cut marks on one side of the butt. Couldn't feather out because there wasn't enough wood to do so with the original butt plate.
Hopefully this stock will be reintroduced with the proper dimensions in the future.
I purchased this stock to finish myself,the classic model 12 lines on the top of the stock is not shaped into the wood.The stock is close to 1/2 inch to short to accept the repo or factory butt plate.The LOP is close to one inch shorter than the factory field stock.The stock is 1/4 inch wider than factory,not a big deal I could shape it on the belt sander.I can take off the wood but not add the wood to the short LOP and butt plate base.[...]I'm in a hunt club and I do competitive card shoots about every weekend and I like to talk guns !
Great Stock at a Good Price(05/04/2012)
I purchased one of these buttstocks for my Savage Model 720. The stock is listed to fit a Remington Model 11, It should also be listed to fit the Savage Model 720, as it fit very well and only needed a final fit, and finishing.The wood is listed as straight grain with no figure, however the one I recieved has enough straight grain to be very eye pleasing. I wood definately buy this stock again.