Help and contact
(0) Basket
Newsletter
Home
Reloading
Case Preparation
Neck Turning
Turning & Expander Mandrels
SINCLAIR INTERNATIONAL STAINLESS STEEL LARGE CALIBER TURNING MANDRELS
Support
SINCLAIR INTERNATIONAL
STAINLESS STEEL LARGE CALIBER TURNING MANDRELS
22.9
22.9
6
GBP
Product no.: 749002092
SINCLAIR INTERNATIONAL 408 CALIBER (.406") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA40 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 408 CALIBER (.406") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA40 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 408 Caliber
Diameter (in): 0.406
Product no.: 749002089
SINCLAIR INTERNATIONAL 35 CALIBER (.356") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA35 Sinclair Large Caliber Turning Mandrels, 35 cal
SINCLAIR INTERNATIONAL 35 CALIBER (.356") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA35 Sinclair Large Caliber Turning Mandrels, 35 cal
Specs:
Caliber: 35 Caliber
Diameter (in): 0.356
Product no.: 749002090
SINCLAIR INTERNATIONAL 9.3MM (.364") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA36 Sinclair Large Caliber Turning Mandrels, 9.3mm
SINCLAIR INTERNATIONAL 9.3MM (.364") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA36 Sinclair Large Caliber Turning Mandrels, 9.3mm
Specs:
Caliber: 9.3mm
Diameter (in): 0.364
Product no.: 749002091
SINCLAIR INTERNATIONAL 375 CALIBER (.373") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA37 Sinclair Large Caliber Turning Mandrels, 375 cal
SINCLAIR INTERNATIONAL 375 CALIBER (.373") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA37 Sinclair Large Caliber Turning Mandrels, 375 cal
Specs:
Caliber: 375 Caliber
Diameter (in): 0.373
Product no.: 749002093
SINCLAIR INTERNATIONAL 416 CALIBER (.414") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA41 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 416 CALIBER (.414") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA41 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 416 Caliber
Diameter (in): 0.414
Product no.: 749002101
SINCLAIR INTERNATIONAL 50 CALIBER (.508") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA50 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 50 CALIBER (.508") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA50 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 50 Caliber
Diameter (in): 0.508
Discover Sinclair's stainless steel neck turning mandrels for 408 caliber cartridges. Precision-engineered for accuracy and consistency! 🔧
In stock
£9.90
£9.90 - £11.90
In stock
£31.90
£29.90 - £31.90
Classical view
Mobile view