Help and contact
(0) Basket
Newsletter
Home
Reloading
Case Preparation
Neck Turning
Turning & Expander Mandrels
SINCLAIR INTERNATIONAL STAINLESS STEEL NECK TURNING MANDRELS
Support
SINCLAIR INTERNATIONAL
STAINLESS STEEL NECK TURNING MANDRELS
16.9
16.9
11
GBP
Product no.: 749001186
SINCLAIR INTERNATIONAL 6MM (.241") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 6MM (.241") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 243 Caliber, 6mm
Diameter (in): 0.241
Product no.: 749001167
SINCLAIR INTERNATIONAL 7MM (.282") STAINLESS NECK TURNING MANDREL Sinclair Neck Turning Mandrel, 7 mm
SINCLAIR INTERNATIONAL 7MM (.282") STAINLESS NECK TURNING MANDREL Sinclair Neck Turning Mandrel, 7 mm
Specs:
Caliber: 284 Caliber, 7mm
Diameter (in): 0.282
Product no.: 749001180
SINCLAIR INTERNATIONAL 6.5MM (.262") STAINLESS NECK TURNING MANDREL Sinclair Neck Turning Mandrel, 6.5 mm
SINCLAIR INTERNATIONAL 6.5MM (.262") STAINLESS NECK TURNING MANDREL Sinclair Neck Turning Mandrel, 6.5 mm
Specs:
Caliber: 6.5mm, 264 Caliber
Diameter (in): 0.262
Product no.: 749001147
SINCLAIR INTERNATIONAL 17 CALIBER (.170") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 17 CALIBER (.170") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 17 Caliber
Diameter (in): 0.170
Product no.: 749001159
SINCLAIR INTERNATIONAL 338 CALIBER (.336") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 338 CALIBER (.336") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 338 Caliber
Diameter (in): 0.336
Product no.: 749001162
SINCLAIR INTERNATIONAL 25 CALIBER (.255") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 25 CALIBER (.255") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 25 Caliber
Diameter (in): 0.255
Product no.: 749001163
SINCLAIR INTERNATIONAL 270 CALIBER (.275") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 270 CALIBER (.275") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 270 Caliber, 6.8mm
Diameter (in): 0.275
Product no.: 749001174
SINCLAIR INTERNATIONAL 20 CALIBER (.202") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 20 CALIBER (.202") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 20 Caliber
Diameter (in): 0.202
Product no.: 749001184
SINCLAIR INTERNATIONAL 30 CALIBER (.306") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA30 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 30 CALIBER (.306") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA30 Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 30 Caliber
Diameter (in): 0.306
Product no.: 749001185
SINCLAIR INTERNATIONAL 22 CALIBER (.222") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
SINCLAIR INTERNATIONAL 22 CALIBER (.222") STAINLESS NECK TURNING MANDREL Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Expander Body and NT-5000 Turning Tool.
Specs:
Caliber: 22 Caliber
Diameter (in): 0.222
Product no.: 749011562
SINCLAIR INTERNATIONAL 8MM (.321") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA32 Sinclair Neck Turning Mandrel, 8mm
SINCLAIR INTERNATIONAL 8MM (.321") STAINLESS NECK TURNING MANDREL
Mfr Part: NTA32 Sinclair Neck Turning Mandrel, 8mm
Specs:
Caliber: 8mm, 32 Caliber
Diameter (in): 0.321
Discover Sinclair's stainless steel neck turning mandrels for precision handloading. Perfect for 6mm cartridges! 🔧 Get consistent results today!
Classical view
Mobile view