Help and contact
(0) Basket
Newsletter
SPIRITUS SYSTEMS
RIFLE MAGAZINE INSERTS
34.9
43.9
4
GBP
Product no.: 430100544
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, DOUBLE 7.62 X .51
Mfr Part: MI-762-DB WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, DOUBLE 7.62 X .51
Mfr Part: MI-762-DB WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
Specs:
Color: Black
Product no.: 430100543
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, TRIPLE 5.56 X .45
Mfr Part: MI-556-TR WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, TRIPLE 5.56 X .45
Mfr Part: MI-556-TR WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
Specs:
Color: Black
Product no.: 430100542
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, SINGLE, 5.56 X .45
Mfr Part: MI-556-SN WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, SINGLE, 5.56 X .45
Mfr Part: MI-556-SN WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
Specs:
Color: Black
Product no.: 430100545
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, SINGLE, 7.62 X .51
Mfr Part: MI-762-SN WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
SPIRITUS SYSTEMS RIFLE MAGAZINE INSERT, SINGLE, 7.62 X .51
Mfr Part: MI-762-SN WARNING: This insert is ONLY compatible with the Micro Fight MK3 and MK4 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches. The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one. It can fit into either pocket on the Micro Fight Chassis MK 3, as well as the FRONT POCKET only on the MK2. This product is not compatible with the MK1 series. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. This product is also compatible with the Unity Tactical CLUTCH belt. The Micro Fight Magazine Insert is a custom solution to a common problem. Instead of using pull tabs, Velcro, snap flaps. or a hard kydex insert; we have chosen to use something a little more versatile. Using elastic is very quiet when removing or adding magazines, giving you quick and easy access to your magazines while providing excellent retention. Elastic will not deform due to heat over time and although it will loosen some with use, it will still provide excellent retention of your magazines. The magazine insert is retained by hard loop velcro sewn to both sides. This allows for the insert to fit in the front and rear pockets of the Micro Fight Chassis (MK3 and Mk4). The Micro Fight Rifle Magazine Insert will accept both PMAGS and USGI magazines. This is a critical component of the Micro Fight Chest Rig System. You can place an insert in both the front and rear pocket of your Micro Fight Chest Rig. This will enable you to hold a total of 6 x 5.56 Magazines or 4 x 7.62 Magazines. Available in Jet Black Only The Micro Fight Rifle Inserts are currently available in the following configurations: • 5.56 x .45 - 3 magazines, single stack. Dimensions 9" x 4" • 7.62 x .51 - 2 magazines, single stack. Dimension 7.75" x 4" • 7.62 x .51 (HK) 2 magazines, single stack. Dimensions 9" x 4" NOTE: The MAGAZINE INSERT is a required product for the Micro Fight Chest Rig System. Some images shown with optional accessories, sold separately.
Specs:
Color: Black
Enhance your Micro Fight MK3 & MK4 with the RIFLE MAGAZINE INSERTS! 🛡️ Securely hold 4 x 7.62 magazines with quiet elastic retention.
Classical view
Mobile view