Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

REDDING
STEEL NECK BUSHINGS

611760732652 749002033
Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.

29.9 33.9 98 GBP
Product no.: 749002033
REDDING 73 STYLE STEEL BUSHING/.265
Mfr Part: 73265 611760732652 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 4 £32.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .265

Top takeaways

  1. Redding 73 style steel bushings are heat treated with a surface hardness of Rc 60-62 for reduced sizing effort.
  2. Bushings come in a range from .185" through .368" in .001" increments, with the part number ending in the size (e.g., #RD73XXX).
  3. The specific product has a diameter of .265 inches and is part of the Neck Size Bushings main category.

Attributes

Diameter (in): .265 Delivery weight: 0.032kg Shipping height: 8mm Shipping width: 83mm Shipping length: 146mm UPC : 611760732652

Item details

Made in USA



Product no.: 749001967
REDDING 73 STYLE STEEL BUSHING/.307
Mfr Part: 73307 611760733079 Redding 73 Style Steel Bushing/.307
31.9 GBP 2 £31.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .307
Product no.: 749001968
REDDING 73 STYLE STEEL BUSHING/.313
Mfr Part: 73313 611760733130 Redding 73 Style Steel Bushing/.313
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .313
Product no.: 749001970
REDDING 73 STYLE STEEL BUSHING/.315
Mfr Part: 73315 611760733154 Redding 73 Style Steel Bushing/.315
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .315
Product no.: 749002008
REDDING 73 STYLE STEEL BUSHING/.327
Mfr Part: 73327 611760733277 Redding 73 Style Steel Bushing/.327
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .327
Product no.: 749002009
REDDING 73 STYLE STEEL BUSHING/.328
Mfr Part: 73328 611760733284 Redding 73 Style Steel Bushing/.328
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .328
Product no.: 749002010
REDDING 73 STYLE STEEL BUSHING/.338
Mfr Part: 73338 611760733383 Redding 73 Style Steel Bushing/.338
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .338
Product no.: 749002012
REDDING 0.225" STEEL NECK BUSHING
Mfr Part: 73225 611760732256 Redding 73 Style Steel Bushing/.225
32.9 GBP 1 £32.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .225
Product no.: 749002015
REDDING 73 STYLE STEEL BUSHING/.261
Mfr Part: 73261 611760732614 Redding 73 Style Steel Bushing/.261
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .261
Product no.: 749002056
REDDING 73 STYLE STEEL BUSHING/.332
Mfr Part: 73332 611760733321 Redding 73 Style Steel Bushing/.332
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .332
Product no.: 749002057
REDDING 73 STYLE STEEL BUSHING/.336
Mfr Part: 73336 611760733369 Redding 73 Style Steel Bushing/.336
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .336
Product no.: 749002058
REDDING 73 STYLE STEEL BUSHING/.337
Mfr Part: 73337 611760733376 Redding 73 Style Steel Bushing/.337
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .337
Product no.: 749002059
REDDING 73 STYLE STEEL BUSHING/.333
Mfr Part: 73333 611760733338 Redding 73 Style Steel Bushing/.333
33.9 GBP 3 £33.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .333
Product no.: 749002060
REDDING 73 STYLE STEEL BUSHING/.334
Mfr Part: 73334 611760733345 Redding 73 Style Steel Bushing/.334
33.9 GBP 1 £33.90 *
1 In stock, delivery from UK warehouse within 2-3 days
Specs: Diameter (in): .334
Product no.: 749002061
REDDING 73 STYLE STEEL BUSHING/.335
Mfr Part: 73335 611760733352 Redding 73 Style Steel Bushing/.335
33.9 GBP 4 £33.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .335
Product no.: 749001899
REDDING 73 STYLE STEEL BUSHING/.227
Mfr Part: 73227 611760732270 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .227
Product no.: 749001900
REDDING 73 STYLE STEEL BUSHING/.228
Mfr Part: 73228 611760732287 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .228
Product no.: 749001901
REDDING 73 STYLE STEEL BUSHING/.229
Mfr Part: 73229 611760732294 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .229
Product no.: 749001932
REDDING 73 STYLE STEEL BUSHING/.366
Mfr Part: 73366 611760733666 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .366
Product no.: 749001933
REDDING 73 STYLE STEEL BUSHING/.367
Mfr Part: 73367 611760733673 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 2 £32.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .367
Product no.: 749001934
REDDING 73 STYLE STEEL BUSHING/.368
Mfr Part: 73368 611760733680 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
29.9 GBP 4 £29.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .368
Product no.: 749001939
REDDING 0.226" STEEL NECK BUSHING
Mfr Part: 73226 611760732263 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .226
Product no.: 749001941
REDDING 73 STYLE STEEL BUSHING/.233
Mfr Part: 73233 611760732331 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .233
Product no.: 749001946
REDDING 73 STYLE STEEL BUSHING/.252
Mfr Part: 73252 611760732522 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .252
Product no.: 749001947
REDDING 73 STYLE STEEL BUSHING/.253
Mfr Part: 73253 611760732539 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .253
Product no.: 749001948
REDDING 73 STYLE STEEL BUSHING/.254
Mfr Part: 73254 611760732546 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .254
Product no.: 749001949
REDDING 73 STYLE STEEL BUSHING/.255
Mfr Part: 73255 611760732553 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .255
Product no.: 749001950
REDDING 73 STYLE STEEL BUSHING/.256
Mfr Part: 73256 611760732560 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .256
Product no.: 749001957
REDDING 73 STYLE STEEL BUSHING/.295
Mfr Part: 73295 611760732959 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .295
Product no.: 749001959
REDDING 73 STYLE STEEL BUSHING/.297
Mfr Part: 73297 611760732973 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .297
Product no.: 749001962
REDDING 73 STYLE STEEL BUSHING/.300
Mfr Part: 73300 611760733000 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .300
Product no.: 749001963
REDDING 73 STYLE STEEL BUSHING/.301
Mfr Part: 73301 611760733017 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .301
Product no.: 749001964
REDDING 73 STYLE STEEL BUSHING/.302
Mfr Part: 73302 611760733024 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 2 £32.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .302
Product no.: 749001966
REDDING 73 STYLE STEEL BUSHING/.304
Mfr Part: 73304 611760733048 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .304
Product no.: 749001973
REDDING 73 STYLE STEEL BUSHING/.323
Mfr Part: 73323 611760733239 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .323
Product no.: 749001974
REDDING 73 STYLE STEEL BUSHING/.324
Mfr Part: 73324 611760733246 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .324
Product no.: 749001977
REDDING 73 STYLE STEEL BUSHING/.339
Mfr Part: 73339 611760733390 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .339
Product no.: 749001978
REDDING 73 STYLE STEEL BUSHING/.340
Mfr Part: 73340 611760733406 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .340
Product no.: 749001983
REDDING 73 STYLE STEEL BUSHING/.362
Mfr Part: 73362 611760733628 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .362
Product no.: 749001984
REDDING 73 STYLE STEEL BUSHING/.363
Mfr Part: 73363 611760733635 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .363
Product no.: 749001985
REDDING 73 STYLE STEEL BUSHING/.364
Mfr Part: 73364 611760733642 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .364
Product no.: 749001986
REDDING 73 STYLE STEEL BUSHING/.365
Mfr Part: 73365 611760733659 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .365
Product no.: 749001994
REDDING 73 STYLE STEEL BUSHING/.263
Mfr Part: 73263 611760732638 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 3 £33.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .263
Product no.: 749001995
REDDING 73 STYLE STEEL BUSHING/.272
Mfr Part: 73272 611760732720 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 4 £32.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .272
Product no.: 749001997
REDDING 73 STYLE STEEL BUSHING/.280
Mfr Part: 73280 611760732805 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .280
Product no.: 749001999
REDDING 73 STYLE STEEL BUSHING/.282
Mfr Part: 73282 611760732829 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
31.9 GBP 2 £31.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .282
Product no.: 749002000
REDDING 73 STYLE STEEL BUSHING/.283
Mfr Part: 73283 611760732836 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
31.9 GBP 2 £31.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .283
Product no.: 749002003
REDDING 73 STYLE STEEL BUSHING/.306
Mfr Part: 73306 611760733062 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
31.9 GBP 1 £31.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .306
Product no.: 749002004
REDDING 73 STYLE STEEL BUSHING/.309
Mfr Part: 73309 611760733093 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .309
Product no.: 749002005
REDDING 73 STYLE STEEL BUSHING/.310
Mfr Part: 73310 611760733109 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 3 £33.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .310
Product no.: 749002006
REDDING 73 STYLE STEEL BUSHING/.311
Mfr Part: 73311 611760733116 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .311
Product no.: 749002016
REDDING 73 STYLE STEEL BUSHING/.262
Mfr Part: 73262 611760732621 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .262
Product no.: 749002017
REDDING 73 STYLE STEEL BUSHING/.264
Mfr Part: 73264 611760732645 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .264
Product no.: 749002019
REDDING 73 STYLE STEEL BUSHING/.286
Mfr Part: 73286 611760732867 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .286
Product no.: 749002020
REDDING 73 STYLE STEEL BUSHING/.287
Mfr Part: 73287 611760732874 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 1 £32.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .287
Product no.: 749002021
REDDING 73 STYLE STEEL BUSHING/.288
Mfr Part: 73288 611760732881 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 3 £32.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .288
Product no.: 749002022
REDDING 73 STYLE STEEL BUSHING/.294
Mfr Part: 73294 611760732942 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .294
Product no.: 749002023
REDDING 73 STYLE STEEL BUSHING/.308
Mfr Part: 73308 611760733086 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .308
Product no.: 749002024
REDDING 73 STYLE STEEL BUSHING/.329
Mfr Part: 73329 611760733291 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .329
Product no.: 749002026
REDDING 73 STYLE STEEL BUSHING/.242
Mfr Part: 73242 611760732423 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .242
Product no.: 749002027
REDDING 73 STYLE STEEL BUSHING/.243
Mfr Part: 73243 611760732430 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .243
Product no.: 749002028
REDDING 73 STYLE STEEL BUSHING/.249
Mfr Part: 73249 611760732492 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .249
Product no.: 749002029
REDDING 73 STYLE STEEL BUSHING/.250
Mfr Part: 73250 611760732508 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .250
Product no.: 749002030
REDDING 73 STYLE STEEL BUSHING/.257
Mfr Part: 73257 611760732577 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .257
Product no.: 749002031
REDDING 73 STYLE STEEL BUSHING/.259
Mfr Part: 73259 611760732591 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .259
Product no.: 749002034
REDDING 73 STYLE STEEL BUSHING/.268
Mfr Part: 73268 611760732683 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 2 £32.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .268
Product no.: 749002036
REDDING 73 STYLE STEEL BUSHING/.289
Mfr Part: 73289 611760732898 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .289
Product no.: 749002038
REDDING 73 STYLE STEEL BUSHING/.291
Mfr Part: 73291 611760732911 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 1 £32.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .291
Product no.: 749002039
REDDING 73 STYLE STEEL BUSHING/.293
Mfr Part: 73293 611760732935 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .293
Product no.: 749002040
REDDING 73 STYLE STEEL BUSHING/.330
Mfr Part: 73330 611760733307 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .330
Product no.: 749002044
REDDING 73 STYLE STEEL BUSHING/.244
Mfr Part: 73244 611760732447 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 4 £33.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .244
Product no.: 749002045
REDDING 73 STYLE STEEL BUSHING/.245
Mfr Part: 73245 611760732454 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 4 £33.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .245
Product no.: 749002046
REDDING 73 STYLE STEEL BUSHING/.246
Mfr Part: 73246 611760732461 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 3 £33.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .246
Product no.: 749002048
REDDING 73 STYLE STEEL BUSHING/.248
Mfr Part: 73248 611760732485 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 3 £33.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .248
Product no.: 749002049
REDDING 73 STYLE STEEL BUSHING/.258
Mfr Part: 73258 611760732584 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 2 £33.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .258
Product no.: 749002050
REDDING 73 STYLE STEEL BUSHING/.266
Mfr Part: 73266 611760732669 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 2 £32.90 *
Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse
Specs: Diameter (in): .266
Product no.: 749002051
REDDING 73 STYLE STEEL BUSHING/.267
Mfr Part: 73267 611760732676 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 1 £33.90 *
Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse
Specs: Diameter (in): .267
Product no.: 749002052
REDDING 73 STYLE STEEL BUSHING/.269
Mfr Part: 73269 611760732690 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 4 £32.90 *
Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse
Specs: Diameter (in): .269
Product no.: 749002053
REDDING 73 STYLE STEEL BUSHING/.270
Mfr Part: 73270 611760732706 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 3 £33.90 *
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Diameter (in): .270
Product no.: 749002055
REDDING 73 STYLE STEEL BUSHING/.331
Mfr Part: 73331 611760733314 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 5 £33.90 *
Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse
Specs: Diameter (in): .331
Product no.: 749001969
REDDING 73 STYLE STEEL BUSHING/.314
Mfr Part: 73314 611760733147 Redding 73 Style Steel Bushing/.314
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .314
Product no.: 749002007
REDDING 73 STYLE STEEL BUSHING/.312
Mfr Part: 73312 611760733123 Redding 73 Style Steel Bushing/.312
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .312
Product no.: 749002014
REDDING 73 STYLE STEEL BUSHING/.241
Mfr Part: 73241 611760732416 Redding 73 Style Steel Bushing/.241
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .241
Product no.: 749001971
REDDING 73 STYLE STEEL BUSHING/.316
Mfr Part: 73316 611760733161 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .316
Product no.: 749001975
REDDING 73 STYLE STEEL BUSHING/.325
Mfr Part: 73325 611760733253 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .325
Product no.: 749001976
REDDING 73 STYLE STEEL BUSHING/.326
Mfr Part: 73326 611760733260 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .326
Product no.: 749001993
REDDING 73 STYLE STEEL BUSHING/.251
Mfr Part: 73251 611760732515 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .251
Product no.: 749001996
REDDING 73 STYLE STEEL BUSHING/.273
Mfr Part: 73273 611760732737 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
31.9 GBP 0 £31.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .273
Product no.: 749001998
REDDING 73 STYLE STEEL BUSHING/.281
Mfr Part: 73281 611760732812 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .281
Product no.: 749002001
REDDING 73 STYLE STEEL BUSHING/.284
Mfr Part: 73284 611760732843 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
32.9 GBP 0 £32.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .284
Product no.: 749002002
REDDING 73 STYLE STEEL BUSHING/.305
Mfr Part: 73305 611760733055 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .305
Product no.: 749002018
REDDING 73 STYLE STEEL BUSHING/.285
Mfr Part: 73285 611760732850 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
31.9 GBP 0 £31.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .285
Product no.: 749002032
REDDING 73 STYLE STEEL BUSHING/.260
Mfr Part: 73260 611760732607 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .260
Product no.: 749002035
REDDING 73 STYLE STEEL BUSHING/.271
Mfr Part: 73271 611760732713 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .271
Product no.: 749002037
REDDING 73 STYLE STEEL BUSHING/.290
Mfr Part: 73290 611760732904 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .290
Product no.: 749002047
REDDING 73 STYLE STEEL BUSHING/.247
Mfr Part: 73247 611760732478 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .247
Product no.: 749002054
REDDING 73 STYLE STEEL BUSHING/.292
Mfr Part: 73292 611760732928 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Specs: Diameter (in): .292
Product no.: 749001935
REDDING 73 STYLE STEEL BUSHING/.200
Mfr Part: 73200 611760732003 Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"
33.9 GBP 0 £33.90 *
Notify on availability
Out of stock. No ETA.
Specs: Diameter (in): .200

Discover Redding's heat-treated steel neck bushings for precise sizing. 🌟 Available in .185" to .368" for all your reloading needs!

Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368"

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.

3.7
In stock
£18.90 £16.90 - £18.90
5
Not available
 
1.5
In stock
£11.90 £11.90 - £19.90
0
In stock
£27.90 £26.90 - £28.90
Back to top