Help and contact
(0) Basket
Newsletter
Home
Gun Cleaning & Chemicals
Cleaning Kits
Rifle Cleaning Kits
SINCLAIR INTERNATIONAL ACTION CLEANING TOOL KIT
Support
SINCLAIR INTERNATIONAL
ACTION CLEANING TOOL KIT
16.9
64.9
7
GBP
Product no.: 749000185
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL COTTON ROLLS 50 PACK
Mfr Part: 8969286 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL COTTON ROLLS 50 PACK
Mfr Part: 8969286 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Product no.: 749000222
SINCLAIR INTERNATIONAL NEW STYLE ACT HANDLE The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL NEW STYLE ACT HANDLE The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Product no.: 749000729
SINCLAIR INTERNATIONAL KIMBER/SMALL SAKO ACTION CLEANING TOOL HEAD
Mfr Part: ACT5 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL KIMBER/SMALL SAKO ACTION CLEANING TOOL HEAD
Mfr Part: ACT5 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Product no.: 749001367
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL SWAB HANDLE
Mfr Part: ACT0 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL SWAB HANDLE
Mfr Part: ACT0 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Product no.: 749000179
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL FELTS 5 PACK The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL FELTS 5 PACK The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Quantity: 5
Product no.: 749003115
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Product no.: 749004651
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL KIT 050806110915 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL KIT 050806110915 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
Keep your bolt action rifle in top shape with our ACTION CLEANING TOOL KIT 🛠️. Includes lug recess tool, chamber swab, and double-headed brush.
Reordered
£21.90
£19.90 - £33.90
In stock
£15.90
£15.90 - £18.90
Classical view
Mobile view