The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
More...
Customer ratings for REDDING NECK SIZING DIE 30-20 TC
Number of ratings: 1
From brownells.com: 1
Average rating: 4
Simple(07/06/2011)
Bought this for my hunting rifle; I used this die to neck down some new .300 win mag brass that i had earlier necked up. I was looking to reset the shoulder for these cases so as to prevent any excessive stretching at the belt, and to see if they would be noticeably more accurate on paper with not only having the belt controlling headspace but also the shoulder. My rifle shoots PLENTY accurate for any hunting scenario, but I still enjoy finding ways to shoot more accurately. Price wasn't too bad... but I would have thought that it would be a little bit cheaper for one.... but it IS a great die....
Product no.: 749005831 REDDING NECK SIZING DIE 30-20 TC Mfr Part: 81254611760812545 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004242 REDDING NECK SIZING DIE 270 WIN Mfr Part: 81135611760811357 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004243 REDDING NECK SIZING DIE 7MM REM MAG Mfr Part: 81136611760811364 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004245 REDDING NECK SIZING DIE 300 WIN MAG Mfr Part: 81153611760811531 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004257 REDDING NECK SIZING DIE 243 WIN Mfr Part: 81114611760811142 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004258 REDDING NECK SIZING DIE 30-06 SPRINGFIELD Mfr Part: 81148611760811487 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004266 REDDING NECK SIZING DIE 22-250 REM Mfr Part: 81106611760811067 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004272 REDDING NECK SIZING DIE 223 REM Mfr Part: 81111611760811111 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749005265 REDDING NECK SIZING DIE 30 REM AR Mfr Part: 81214611760812149 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011000 REDDING NECK SIZING DIE 30 TC Mfr Part: 81236611760812361 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011002 REDDING NECK SIZING DIE 370 SAKO MAG Mfr Part: 81456611760814563 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749101770 REDDING NECK SIZING DIE 300 RCM Mfr Part: 81257611760812576 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749006427 REDDING NECK SIZING DIE 6MM/22-250 REM Mfr Part: 81516611760815164 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 100028800 REDDING 20 NOSLER NECK SIZING DIE Mfr Part: 81474611760814747 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749018640 REDDING NECK SIZING DIE 6.5 PRC Mfr Part: 81487611760814877 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749019263 REDDING 300 PRC NECK SIZING DIE Mfr Part: 81776611760817762 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749004274 REDDING NECK SIZING DIE 308 WIN Mfr Part: 81155611760811555 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011006 REDDING NECK SIZING DIE 6.5MM CREEDMOOR Mfr Part: 81446611760814464 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749007576 REDDING NECK SIZING DIE 30 REM BR Mfr Part: 81524611760815249 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
144.9GBP0£144.90
*
Will be procured from the supplier after your order Delivery time approx. 4-12 weeks.
Specs:Cartridge: 30 BR (Benchrest) RemingtonDie Style: Neck Sizing Dies
Product no.: 749006420 REDDING NECK SIZING DIE 25-284 WIN Mfr Part: 81417611760814174 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749007592 REDDING NECK SIZING DIE 17 HORNET ACKLEY IMP Mfr Part: 81500611760815003 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749007547 REDDING NECK SIZING DIE 6.5X68MM S Mfr Part: 81447 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749005275 REDDING NECK SIZING DIE 300 SAVAGE Mfr Part: 81151611760811517 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749005285 REDDING 7MM TCU NECK SIZING DIE Mfr Part: 81242611760812422 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749005316 REDDING NECK SIZING DIE 223 WSSM Mfr Part: 81295611760812958 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011001 REDDING NECK SIZING DIE 308 MARLIN EXPRESS Mfr Part: 81294611760812941 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011007 REDDING NECK SIZING DIE 6.5MM-300 WSM Mfr Part: 81723611760817236 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749006419 REDDING NECK SIZING DIE 219 DONALDSON WASP Mfr Part: 81403611760814037 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749006423 REDDING NECK SIZING DIE 30-30 ACKLEY IMP 40 Mfr Part: 81431611760814310 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749007585 REDDING NECK SIZING DIE 30-284 WIN Mfr Part: 81523611760815232 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749016572 REDDING 6MM CREEDMOOR NECK SIZING DIE Mfr Part: 81443611760814433 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 100028798 REDDING 24 NOSLER NECK SIZING DIE Mfr Part: 81320611760813207 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 100028801 REDDING 6MM DASHER NECK SIZING DIE Mfr Part: 81648611760816482 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749019264 REDDING 22 CREEDMOOR NECK SIZING DIE Mfr Part: 81302611760813023 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749019265 REDDING 6.5 WHETHERBY RPM NECK SIZING DIE Mfr Part: 81794611760817946 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749008527 REDDING NECK SIZING DIE 25 WSSM Mfr Part: 81739611760817397 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011009 REDDING NECK SIZING DIE 6MM-06 IMP Mfr Part: 81651611760816512 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011010 REDDING NECK SIZING DIE 7MM US Mfr Part: 81854611760818547 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011012 REDDING NECK SIZING DIE 8MM-06 ACKLEY IMP Mfr Part: 81436 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
Product no.: 749011014 REDDING NECK SIZING DIE 220 SWIFT Mfr Part: 81655611760816550 The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchanged between rifles since the neck sizing dies do not size the shoulder or body. Ideal for cartridges used in Bolt Action rifles. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging.
More...
Customer ratings for REDDING NECK SIZING DIE 30-20 TC
Number of ratings: 1
From brownells.com: 1
Average rating: 4
Simple(07/06/2011)
Bought this for my hunting rifle; I used this die to neck down some new .300 win mag brass that i had earlier necked up. I was looking to reset the shoulder for these cases so as to prevent any excessive stretching at the belt, and to see if they would be noticeably more accurate on paper with not only having the belt controlling headspace but also the shoulder. My rifle shoots PLENTY accurate for any hunting scenario, but I still enjoy finding ways to shoot more accurately. Price wasn't too bad... but I would have thought that it would be a little bit cheaper for one.... but it IS a great die....