Help and contact
(0) Basket
Newsletter
Home
Gunsmith Tools
Barrel Tools
Reamers
Centerfire Reamers
CLYMER RIMLESS RIFLE CHAMBERING REAMERS
Support
CLYMER
RIMLESS RIFLE CHAMBERING REAMERS
144.9
224.9
30
GBP
Product no.: 184050320
CLYMER 30 M1 CARBINE FINISHING REAMER
Mfr Part: F30M-1CARB Finisher Style Reamer fits .30 M1 Carbine
CLYMER 30 M1 CARBINE FINISHING REAMER
Mfr Part: F30M-1CARB Finisher Style Reamer fits .30 M1 Carbine
Specs:
Cartridge: 30 Carbine
Style: Rimless Rifle
Product no.: 184050005
CLYMER 17 REMINGTON FINISHING REAMER
Mfr Part: F17REM Finisher Style Reamer fits .17 Remington
CLYMER 17 REMINGTON FINISHING REAMER
Mfr Part: F17REM Finisher Style Reamer fits .17 Remington
Specs:
Cartridge: 17 Remington
Style: Rimless Rifle
Product no.: 184050080
CLYMER 220 SWIFT BOLT ACTION FINISHING REAMER
Mfr Part: F220SW Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 220 SWIFT BOLT ACTION FINISHING REAMER
Mfr Part: F220SW Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 220 Swift
Style: Rimless Rifle
Product no.: 184050100
CLYMER 222 REMINGTON FINISHING REAMER
Mfr Part: F222REM Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 222 REMINGTON FINISHING REAMER
Mfr Part: F222REM Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 222 Remington
Style: Rimless Rifle
Product no.: 184050101
CLYMER 223 REMINGTON ROUGHER REAMER
Mfr Part: R221/222/223 Rougher Style Reamer fits .221/.222/.223 Remington
CLYMER 223 REMINGTON ROUGHER REAMER
Mfr Part: R221/222/223 Rougher Style Reamer fits .221/.222/.223 Remington
Specs:
Cartridge: 223 Remington, 222 Remington
Style: Rimless Rifle
Product no.: 184050120
CLYMER 223 REMINGTON FINISHING REAMER
Mfr Part: F223REM Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 223 REMINGTON FINISHING REAMER
Mfr Part: F223REM Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 223 Remington
Style: Rimless Rifle
Product no.: 184050130
CLYMER 22-250 REMINGTON FINISHING REAMER
Mfr Part: F22250 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 22-250 REMINGTON FINISHING REAMER
Mfr Part: F22250 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 22-250 Remington
Style: Rimless Rifle
Product no.: 184050131
CLYMER 22-250 REMINGTON ROUGHER REAMER
Mfr Part: R22250 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 22-250 REMINGTON ROUGHER REAMER
Mfr Part: R22250 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 22-250 Remington
Style: Rimless Rifle
Product no.: 184050150
CLYMER 243 WINCHESTER FINISHING REAMER
Mfr Part: F243WIN Finisher Style Reamer fits .243 Winchester
CLYMER 243 WINCHESTER FINISHING REAMER
Mfr Part: F243WIN Finisher Style Reamer fits .243 Winchester
Specs:
Cartridge: 243 Winchester
Style: Rimless Rifle
Product no.: 184050155
CLYMER 6MM REMINGTON BR FINISHING REAMER
Mfr Part: F6MMBR Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 6MM REMINGTON BR FINISHING REAMER
Mfr Part: F6MMBR Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 6 mm Rem BR (Benchrest)
Style: Rimless Rifle
Product no.: 184050190
CLYMER 250 SAVAGE FINISHING REAMER
Mfr Part: F250SAV Finisher Style Reamer fits .250 Savage, 250-3000
CLYMER 250 SAVAGE FINISHING REAMER
Mfr Part: F250SAV Finisher Style Reamer fits .250 Savage, 250-3000
Specs:
Cartridge: 250 Savage
Style: Rimless Rifle
Product no.: 184050200
CLYMER 257 ROBERTS FINISHING REAMER
Mfr Part: F257ROB Finisher Style Reamer fits .257 Roberts
CLYMER 257 ROBERTS FINISHING REAMER
Mfr Part: F257ROB Finisher Style Reamer fits .257 Roberts
Specs:
Cartridge: 257 Roberts
Style: Rimless Rifle
Product no.: 184050215
CLYMER 260 REMINGTON FINISHING REAMER
Mfr Part: F260REM Finisher Style Reamer fits .260 Remington
CLYMER 260 REMINGTON FINISHING REAMER
Mfr Part: F260REM Finisher Style Reamer fits .260 Remington
Specs:
Cartridge: 260 Remington
Style: Rimless Rifle
Product no.: 184050220
CLYMER 25-06 REMINGTON FINISHING REAMER
Mfr Part: F2506 Finisher Style Reamer fits .25-06 Remington
CLYMER 25-06 REMINGTON FINISHING REAMER
Mfr Part: F2506 Finisher Style Reamer fits .25-06 Remington
Specs:
Cartridge: 25-06 Remington
Style: Rimless Rifle
Product no.: 184050230
CLYMER 6.5X55MM SWEDE FINISHING REAMER
Mfr Part: F6555 Finisher Style Reamer fits 6.5mmx55
CLYMER 6.5X55MM SWEDE FINISHING REAMER
Mfr Part: F6555 Finisher Style Reamer fits 6.5mmx55
Specs:
Cartridge: 6.5 x 55 mm Swedish Mauser
Style: Rimless Rifle
Product no.: 184050240
CLYMER 6.5MM-06 A-SQUARE FINISHING REAMER
Mfr Part: F6506 Finisher Style Reamer fits 6.5-06 A-Square
CLYMER 6.5MM-06 A-SQUARE FINISHING REAMER
Mfr Part: F6506 Finisher Style Reamer fits 6.5-06 A-Square
Specs:
Cartridge: 6.5 mm - 06 (A-Square)
Style: Rimless Rifle
Product no.: 184050270
CLYMER 270 WINCHESTER FINISHING REAMER
Mfr Part: F270WIN Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 270 WINCHESTER FINISHING REAMER
Mfr Part: F270WIN Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 270 Winchester
Style: Rimless Rifle
Product no.: 184050275
CLYMER 7.62X39MM FINISHING REAMER
Mfr Part: F76239 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 7.62X39MM FINISHING REAMER
Mfr Part: F76239 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 7.62 x 39 mm Russian
Style: Rimless Rifle
Product no.: 184050280
CLYMER 7X57MM MAUSER FINISHING REAMER
Mfr Part: F7X57 Finisher Style Reamer fits 7mm Mauser
CLYMER 7X57MM MAUSER FINISHING REAMER
Mfr Part: F7X57 Finisher Style Reamer fits 7mm Mauser
Specs:
Cartridge: 7 mm Mauser (7 x 57 mm Mauser)
Style: Rimless Rifle
Product no.: 184050300
CLYMER 280 REMINGTON FINISHING REAMER
Mfr Part: F280REM Finisher Style Reamer fits .280 Remington
CLYMER 280 REMINGTON FINISHING REAMER
Mfr Part: F280REM Finisher Style Reamer fits .280 Remington
Specs:
Cartridge: 280 Remington
Style: Rimless Rifle
Product no.: 184050310
CLYMER 284 WINCHESTER FINISHING REAMER
Mfr Part: F284WIN Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 284 WINCHESTER FINISHING REAMER
Mfr Part: F284WIN Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 284 Winchester
Style: Rimless Rifle
Product no.: 184050312
CLYMER 300 WSM FINISHING REAMER
Mfr Part: F300WSM Finisher Style Reamer fits .300 Winchester Short Mag
CLYMER 300 WSM FINISHING REAMER
Mfr Part: F300WSM Finisher Style Reamer fits .300 Winchester Short Mag
Specs:
Cartridge: 300 WSM (Winchester Short Mag)
Style: Rimless Rifle
Product no.: 184050314
CLYMER 300 REMINGTON ULTRA MAG FINISHING REAMER
Mfr Part: F300REMUMAG Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 300 REMINGTON ULTRA MAG FINISHING REAMER
Mfr Part: F300REMUMAG Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 300 Remington Ultra Magnum
Style: Rimless Rifle
Product no.: 184050350
CLYMER 7MM-08 REMINGTON FINISHING REAMER
Mfr Part: F7MM/08 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 7MM-08 REMINGTON FINISHING REAMER
Mfr Part: F7MM/08 Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 7 mm - 08 Remington
Style: Rimless Rifle
Product no.: 184050390
CLYMER 30-06 SPRINGFIELD FINISHING REAMER
Mfr Part: F3006SPR Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 30-06 SPRINGFIELD FINISHING REAMER
Mfr Part: F3006SPR Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 30-06 Springfield
Style: Rimless Rifle
Product no.: 184050400
CLYMER 308 WINCHESTER FINISHING REAMER
Mfr Part: F308WIN Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 308 WINCHESTER FINISHING REAMER
Mfr Part: F308WIN Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 308 Winchester
Style: Rimless Rifle
Product no.: 184050401
CLYMER 308 WINCHESTER ROUGHER REAMER
Mfr Part: R308WIN Rougher Style Reamer fits .308 Winchester
CLYMER 308 WINCHESTER ROUGHER REAMER
Mfr Part: R308WIN Rougher Style Reamer fits .308 Winchester
Specs:
Cartridge: 308 Winchester
Style: Rimless Rifle
Product no.: 184050440
CLYMER 8X57MM MAUSER FINISHING REAMER
Mfr Part: F8X57 Finisher Style Reamer fits 8mm Mauser
CLYMER 8X57MM MAUSER FINISHING REAMER
Mfr Part: F8X57 Finisher Style Reamer fits 8mm Mauser
Specs:
Cartridge: 8 mm Mauser (8 x 57 mm Mauser)
Style: Rimless Rifle
Product no.: 184050510
CLYMER 35 WHELAN FINISHING REAMER
Mfr Part: F35WHEL Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 35 WHELAN FINISHING REAMER
Mfr Part: F35WHEL Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 35 Whelen
Style: Rimless Rifle
Product no.: 184050004
CLYMER 5.56MM NATO FINISHING REAMER
Mfr Part: F5.56NATO Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
CLYMER 5.56MM NATO FINISHING REAMER
Mfr Part: F5.56NATO Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.
Specs:
Cartridge: 5.56 mm NATO
Style: Rimless Rifle
Discover the CLYMER Rimless Rifle Chambering Reamer for .30 M1 Carbine. Perfect for precision finishing! 🔧 Get yours today!
In stock
£54.90
£42.90 - £69.90
In stock
£64.90
£42.90 - £69.90
In stock
£49.90
£33.90 - £49.90
In stock
£84.90
£84.90 - £129.90
Classical view
Mobile view