Tough polyurethane cylinder replaces the factory steel bolt stop pin to cushion metal-to-metal impact and reduce receiver wear. Shock-absorbing qualities help reduce felt recoil and receiver stress, while eliminating the annoying “clunk” sound of the bolt cycling. Easy installation instructions included. Color may vary from the manufacturer.
Customer ratings for POWER CUSTOM 10/22® BOLT BUFFER
Number of ratings: 5
From brownells.com: 5
Average rating: 3.4
good product(18/06/2011)
reduces clank of receiver, easy to install
Like it!(22/08/2011)
No issues so far. Gun functions normally, installation/removal is more difficult than the stock steel pin, but not unreasonable so. I used a knife to taper one end so it would start easier. I have installed on all my 10/22's and will install one on all future 10/22's.
Easy Protection(19/10/2011)
Tight fit into the reciever, so don't have to worry about movement. I don't notice a feel in recoil or action, but it's in a 10/22 (a smooth operating, light recoiling gun). It nearly eliminated the clang from the bolt impacting the factory pin. This product is very durable and has taken thousands of rounds without showing wear.
I recommend for the cheap insurance and peace of mind.
Absolute garbage(08/06/2012)
If I could give it 0 stars, I would. Doesn't fit, had to trim one end. Do yourself a favor and buy the KIDD bolt buffer, that's what I'm doing at half the price.
Disapointed(04/04/2013)
I was very interested in what this product had to offer. Installed it and immediately had problems with the rifle cycling. It wouldn't pick up the next round. I took the rifle apart at the range to see if I had installed it wrong but since there is only one way it goes in that was not the case. Installed the factory steel pin and had zero failures. I feel this is a gimick for a problem that doesn't really exist. It would be nice to quiet the noise but I'm not going to sacrifice the reliability the 10/22 has.
Product no.: 713000100 POWER CUSTOM 10/22® BOLT BUFFER Mfr Part: BJB 10-22 Tough polyurethane cylinder replaces the factory steel bolt stop pin to cushion metal-to-metal impact and reduce receiver wear. Shock-absorbing qualities help reduce felt recoil and receiver stress, while eliminating the annoying “clunk” sound of the bolt cycling. Easy installation instructions included. Color may vary from the manufacturer.
The RUGER® 10/22® BOLT BUFFER is made of tough polyurethane to cushion the impact between the bolt and receiver, reducing wear.
Its shock-absorbing properties help to decrease felt recoil and receiver stress, while also eliminating the "clunk" noise during bolt cycling.
Installation is straightforward with the included instructions, and the buffer fits Ruger 10/22 models, with dimensions of approximately 1¼” long by ¼” diameter.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your Ruger® 10/22® with the POWER CUSTOM bolt buffer! 🛠️ Reduce recoil and wear while enjoying easy installation. Perfect for your firearm!
Tough polyurethane cylinder replaces the factory steel bolt stop pin to cushion metal-to-metal impact and reduce receiver wear. Shock-absorbing qualities help reduce felt recoil and receiver stress, while eliminating the annoying “clunk” sound of the bolt cycling. Easy installation instructions included. Color may vary from the manufacturer.
Customer ratings for POWER CUSTOM 10/22® BOLT BUFFER
Number of ratings: 5
From brownells.com: 5
Average rating: 3.4
good product(18/06/2011)
reduces clank of receiver, easy to install
Like it!(22/08/2011)
No issues so far. Gun functions normally, installation/removal is more difficult than the stock steel pin, but not unreasonable so. I used a knife to taper one end so it would start easier. I have installed on all my 10/22's and will install one on all future 10/22's.
Easy Protection(19/10/2011)
Tight fit into the reciever, so don't have to worry about movement. I don't notice a feel in recoil or action, but it's in a 10/22 (a smooth operating, light recoiling gun). It nearly eliminated the clang from the bolt impacting the factory pin. This product is very durable and has taken thousands of rounds without showing wear.
I recommend for the cheap insurance and peace of mind.
Absolute garbage(08/06/2012)
If I could give it 0 stars, I would. Doesn't fit, had to trim one end. Do yourself a favor and buy the KIDD bolt buffer, that's what I'm doing at half the price.
Disapointed(04/04/2013)
I was very interested in what this product had to offer. Installed it and immediately had problems with the rifle cycling. It wouldn't pick up the next round. I took the rifle apart at the range to see if I had installed it wrong but since there is only one way it goes in that was not the case. Installed the factory steel pin and had zero failures. I feel this is a gimick for a problem that doesn't really exist. It would be nice to quiet the noise but I'm not going to sacrifice the reliability the 10/22 has.