Lightweight, extended bolt release has a finger lever that extends an additional 1⁄8". Lets you lock the bolt open using just one finger, and without fumbling. A slight pull on the bolt handle and the bolt releases. Gives fast, convenient reloads. Available in Titanium, steel or stainless steel for the 10/22®; requires no modifications to rifle.
SPECS: Titanium, natural silver finish.
More...
Customer ratings for POWER CUSTOM 10/22® EXTENDED BOLT RELEASE, TITANIUM
Number of ratings: 4
From brownells.com: 4
Average rating: 3
Works fine, finish is lacking.(05/04/2011)
I replaced 3 of my stock Ruger bolt releases with 3 of these auto bolt releases from Power Custom. They works fine other than they are a little hard to operate due to a rough texture/finish. After a couple of range sessions they didn't smooth up, so I pulled all 3 out and buffed them with a bit of rouge. They work fine now. Wish I had gone with some of the less expensive products with better reviews. Also, I don't see any thing "extended" about them.
If they arrive okay, they are great...(11/11/2011)
Had I written this after replacing the first one, it would have recieved a "5". Everything dropped in place within minutes and worked as advertised. Then I changed the second one...
First, the tab angle was not the same as the first and had to be "tweeked". Second, this one had a much rougher finish which did not allow it to fit properly properly. Third, the holes were not the same dimension as the first (which I pulled back out to compare).
A guy at the range changed his out with the exact same part - only issue he had was the texture which he was able to smooth out and now works fine.
I would recommend this with caution only because the QA didn't catch the bad part.
Best check out I have ever seen BZ to Ya(19/09/2014)
THE extended bolt release will save my finger screwdriver and pliers to release the bolt , this will make faster shooting on the range. Now the RSO will not laugh at my trying to close the bolt
Now the hard part will bo installing this part without blood shed and cussing any and everything that walks the planet LOL maybe a gunsmith is needed
perhaps!!!! HAND DON
Didn't work without modifications(05/06/2017)
It did not work right off the bat when I put it in. With some filing of the surface to smooth it out and more filing of the bolt catch area, I got it to work. Ultimately I could have done the same thing with my original part and not bought this. I should have sent it back when it didn't work out of the box.
Product no.: 713000005 POWER CUSTOM 10/22® EXTENDED BOLT RELEASE, TITANIUM Mfr Part: NONE Lightweight, extended bolt release has a finger lever that extends an additional 1⁄8". Lets you lock the bolt open using just one finger, and without fumbling. A slight pull on the bolt handle and the bolt releases. Gives fast, convenient reloads. Available in Titanium, steel or stainless steel for the 10/22®; requires no modifications to rifle.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 713000076 POWER CUSTOM 10/22® EXTENDED BOLT RELEASE, STEEL Mfr Part: 10-22ABRBBLACK Lightweight, extended bolt release has a finger lever that extends an additional 1⁄8". Lets you lock the bolt open using just one finger, and without fumbling. A slight pull on the bolt handle and the bolt releases. Gives fast, convenient reloads. Available in Titanium, steel or stainless steel for the 10/22®; requires no modifications to rifle.
Lightweight, extended bolt release has a finger lever that extends an additional 1⁄8". Lets you lock the bolt open using just one finger, and without fumbling. A slight pull on the bolt handle and the bolt releases. Gives fast, convenient reloads. Available in Titanium, steel or stainless steel for the 10/22®; requires no modifications to rifle.
SPECS: Titanium, natural silver finish.
More...
Customer ratings for POWER CUSTOM 10/22® EXTENDED BOLT RELEASE, TITANIUM
Number of ratings: 4
From brownells.com: 4
Average rating: 3
Works fine, finish is lacking.(05/04/2011)
I replaced 3 of my stock Ruger bolt releases with 3 of these auto bolt releases from Power Custom. They works fine other than they are a little hard to operate due to a rough texture/finish. After a couple of range sessions they didn't smooth up, so I pulled all 3 out and buffed them with a bit of rouge. They work fine now. Wish I had gone with some of the less expensive products with better reviews. Also, I don't see any thing "extended" about them.
If they arrive okay, they are great...(11/11/2011)
Had I written this after replacing the first one, it would have recieved a "5". Everything dropped in place within minutes and worked as advertised. Then I changed the second one...
First, the tab angle was not the same as the first and had to be "tweeked". Second, this one had a much rougher finish which did not allow it to fit properly properly. Third, the holes were not the same dimension as the first (which I pulled back out to compare).
A guy at the range changed his out with the exact same part - only issue he had was the texture which he was able to smooth out and now works fine.
I would recommend this with caution only because the QA didn't catch the bad part.
Best check out I have ever seen BZ to Ya(19/09/2014)
THE extended bolt release will save my finger screwdriver and pliers to release the bolt , this will make faster shooting on the range. Now the RSO will not laugh at my trying to close the bolt
Now the hard part will bo installing this part without blood shed and cussing any and everything that walks the planet LOL maybe a gunsmith is needed
perhaps!!!! HAND DON
Didn't work without modifications(05/06/2017)
It did not work right off the bat when I put it in. With some filing of the surface to smooth it out and more filing of the bolt catch area, I got it to work. Ultimately I could have done the same thing with my original part and not bought this. I should have sent it back when it didn't work out of the box.