Help and contact
(0) Basket
Newsletter
Home
Reloading
Measuring Tools
Bullet Comparators
SINCLAIR INTERNATIONAL BULLET COMPARATOR INSERTS
Support
SINCLAIR INTERNATIONAL
BULLET COMPARATOR INSERTS
11.9
17.9
19
GBP
Product no.: 749000928
SINCLAIR INTERNATIONAL 22 CALIBER (0.224") COMPARATOR INSERT
Mfr Part: 090224 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 22 CALIBER (0.224") COMPARATOR INSERT
Mfr Part: 090224 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 22 Caliber (.223-.224)
Product no.: 749000917
SINCLAIR INTERNATIONAL 375 CALIBER (0.375") COMPARATOR INSERT
Mfr Part: 090375 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 375 CALIBER (0.375") COMPARATOR INSERT
Mfr Part: 090375 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 375 Caliber (.375)
Product no.: 749000918
SINCLAIR INTERNATIONAL 416 CALIBER (0.416") COMPARATOR INSERT
Mfr Part: 090416 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 416 CALIBER (0.416") COMPARATOR INSERT
Mfr Part: 090416 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 416 Caliber (.416)
Product no.: 749000919
SINCLAIR INTERNATIONAL 8MM (0.323") COMPARATOR INSERT
Mfr Part: 090323 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 8MM (0.323") COMPARATOR INSERT
Mfr Part: 090323 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 8 mm (.323)
Product no.: 749000920
SINCLAIR INTERNATIONAL 35 CALIBER (0.358") COMPARATOR INSERT
Mfr Part: 090358 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 35 CALIBER (0.358") COMPARATOR INSERT
Mfr Part: 090358 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 35 Caliber (.358)
Product no.: 749000921
SINCLAIR INTERNATIONAL 45 CALIBER (0.458") COMPARATOR INSERT
Mfr Part: 090458 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 45 CALIBER (0.458") COMPARATOR INSERT
Mfr Part: 090458 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 45 Caliber (.451-.454)
Product no.: 749000922
SINCLAIR INTERNATIONAL 25 CALIBER (0.257") COMPARATOR INSERT
Mfr Part: 090257 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 25 CALIBER (0.257") COMPARATOR INSERT
Mfr Part: 090257 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 25 Caliber (.257)
Product no.: 749000923
SINCLAIR INTERNATIONAL 270 CALIBER (0.277") COMPARATOR INSERT
Mfr Part: 090277 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 270 CALIBER (0.277") COMPARATOR INSERT
Mfr Part: 090277 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 270 Caliber, 6.8mm
Product no.: 749000924
SINCLAIR INTERNATIONAL 17 CALIBER (0.172") COMPARATOR INSERT
Mfr Part: 090172 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 17 CALIBER (0.172") COMPARATOR INSERT
Mfr Part: 090172 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 17 Caliber (.172)
Product no.: 749000925
SINCLAIR INTERNATIONAL 7MM (0.284") COMPARATOR INSERT
Mfr Part: 090284 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 7MM (0.284") COMPARATOR INSERT
Mfr Part: 090284 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 284 Caliber, 7mm
Product no.: 749000926
SINCLAIR INTERNATIONAL 338 CALIBER (0.338") COMPARATOR INSERT
Mfr Part: 090338 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 338 CALIBER (0.338") COMPARATOR INSERT
Mfr Part: 090338 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 338 Caliber (.338)
Product no.: 749000927
SINCLAIR INTERNATIONAL 20 CALIBER (0.204") COMPARATOR INSERT
Mfr Part: 090204 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 20 CALIBER (0.204") COMPARATOR INSERT
Mfr Part: 090204 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 20 Caliber (.204)
Product no.: 749000929
SINCLAIR INTERNATIONAL 6MM (0.243") COMPARATOR INSERT
Mfr Part: 090243 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 6MM (0.243") COMPARATOR INSERT
Mfr Part: 090243 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 243 Caliber, 6mm
Product no.: 749000930
SINCLAIR INTERNATIONAL 6.5MM (0.264") COMPARATOR INSERT
Mfr Part: 090264 SSSSSSSSSSSE The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 6.5MM (0.264") COMPARATOR INSERT
Mfr Part: 090264 SSSSSSSSSSSE The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 6.5mm, 264 Caliber
Product no.: 749000931
SINCLAIR INTERNATIONAL 30 CALIBER (0.308") COMPARATOR INSERT
Mfr Part: 090308 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
SINCLAIR INTERNATIONAL 30 CALIBER (0.308") COMPARATOR INSERT
Mfr Part: 090308 The Sinclair Bullet Comparator inserts are meant to be used with the Sinclair Bullet Comparator and Bump Gage Body. These inserts are stainless steel and machined with a taper and a short straight section to more accurately duplicate the chamber throat. This eliminates the wobble experienced with many comparators which have standard drilled holes. Our design allows you to quickly and accurately measure and compare bullet ogive-to-base as well as loaded round ogive-to-cartridge-base measurements. This measurement gives more consistent results than measuring overall lengths since the meplat (the open tip of the bullet) can very by several thousandths of an inch from bullet to bullet.
Specs:
Caliber: 30 Caliber (.308)
Product no.: 749011510
SINCLAIR INTERNATIONAL 408 CALIBER (0.408") COMPARATOR INSERT
Mfr Part: 090408 Sinclair Comparator Insert, 408 cal
SINCLAIR INTERNATIONAL 408 CALIBER (0.408") COMPARATOR INSERT
Mfr Part: 090408 Sinclair Comparator Insert, 408 cal
Specs:
Caliber: 408 Caliber
Product no.: 749011512
SINCLAIR INTERNATIONAL 9.3MM (0.366") COMPARATOR INSERT
Mfr Part: 090366 Sinclair Comparator Insert, 9.3mm
SINCLAIR INTERNATIONAL 9.3MM (0.366") COMPARATOR INSERT
Mfr Part: 090366 Sinclair Comparator Insert, 9.3mm
Specs:
Caliber: 9.3 mm (.366)
Product no.: 749009372
SINCLAIR INTERNATIONAL 404 CALIBER (0.423") COMPARATOR INSERT
Mfr Part: 090422 Comparator Insert
SINCLAIR INTERNATIONAL 404 CALIBER (0.423") COMPARATOR INSERT
Mfr Part: 090422 Comparator Insert
Specs:
Caliber: 404 Caliber
Product no.: 749011511
SINCLAIR INTERNATIONAL 44 CALIBER (0.429") COMPARATOR INSERT
Mfr Part: 090429 Sinclair Comparator Insert, 44 cal
SINCLAIR INTERNATIONAL 44 CALIBER (0.429") COMPARATOR INSERT
Mfr Part: 090429 Sinclair Comparator Insert, 44 cal
Specs:
Caliber: 44 Caliber (.429-.430)
Enhance your precision with Sinclair Bullet Comparator Inserts! 🔍 Perfect for 22 caliber, get consistent measurements for your reloading needs.
In stock
£21.90
£19.90 - £33.90
Classical view
Mobile view