The ELF AR-15 3-Gun Trigger has been built for winning competitions. This trigger has an adjustable pull weight range between 2.75 lbs and 4lbs. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with Elftmann’s exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 Straight or Curved Trigger Available Incremental Adjustment Knob Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Proprietary double-double torsion hammer spring and skeletonized hammer ensure a lock time second to none Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnector allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans Ultra-Light housing is now standard - Total physical weight of entire unit is just 2oz
More...
002GBP
Product no.: 100800161 ELFTMANN AR-15 3GUN TRIGGER CURVED FINGER ADJUSTABLE Mfr Part: 3GUNCFA702735757241 The ELF AR-15 3-Gun Trigger has been built for winning competitions. This trigger has an adjustable pull weight range between 2.75 lbs and 4lbs. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with Elftmann’s exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 Straight or Curved Trigger Available Incremental Adjustment Knob Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Proprietary double-double torsion hammer spring and skeletonized hammer ensure a lock time second to none Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnector allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans Ultra-Light housing is now standard - Total physical weight of entire unit is just 2oz
The ELF AR-15 3-Gun Trigger features an adjustable pull weight from 2.75 to 4 lbs and utilizes aerospace grade sealed bearings for a smooth pull.
Installation is quick using original hammer and trigger pins, and the trigger offers a short takeup, crisp break, and minimal over-travel comparable to custom 1911 triggers.
It's designed for durability and performance with lightweight aircraft-grade aluminum and hardened steel, ensuring reliability for various users from competitive shooters to law enforcement.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Product no.: 100800162 ELFTMANN AR-15 3GUN TRIGGER STRAIGHT FINGER ADJUSTABLE Mfr Part: 3GUN-S FA702735757258 The ELF AR-15 3-Gun Trigger has been built for winning competitions. This trigger has an adjustable pull weight range between 2.75 lbs and 4lbs. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with Elftmann’s exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 Straight or Curved Trigger Available Incremental Adjustment Knob Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Proprietary double-double torsion hammer spring and skeletonized hammer ensure a lock time second to none Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnector allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans Ultra-Light housing is now standard - Total physical weight of entire unit is just 2oz
The ELF AR-15 3-Gun Trigger features an adjustable pull weight from 2.75 to 4 lbs and uses aerospace grade sealed bearings for a smooth pull.
It is easy to install, offers a fast lock time with its skeletonized hammer and .043 double wound polished piano wire hammer spring, and has an ultra-light total weight of 2oz.
The trigger provides a crisp break with minimal over-travel, is fully drop-safe, and benefits a wide range of users from competitive shooters to military personnel.
Made in USA
US export classification: 0A501.c
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade your AR-15 with the ELF 3-Gun Adjustable Trigger! 🎯 Enjoy a smooth, fast pull with customizable weights for ultimate performance.
The ELF AR-15 3-Gun Trigger has been built for winning competitions. This trigger has an adjustable pull weight range between 2.75 lbs and 4lbs. The only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with Elftmann’s exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 Straight or Curved Trigger Available Incremental Adjustment Knob Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Proprietary double-double torsion hammer spring and skeletonized hammer ensure a lock time second to none Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnector allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans Ultra-Light housing is now standard - Total physical weight of entire unit is just 2oz